Scribd
Upload
20 views

DPDT Switch Connection: Make The Cross Connection End-To-End Terminal

The document provides instructions for assembling a basic robot using DC gear motors, a chassis, wheels, switches, and other components. It describes connecting a DPDT switch to control motors, fitting motors into frames, and modifying robots for games like robo-golf and robo-soccer. Price ranges for common robot parts are also listed.

Uploaded by

Javier Dorado Sánchez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
20 views

DPDT Switch Connection: Make The Cross Connection End-To-End Terminal

The document provides instructions for assembling a basic robot using DC gear motors, a chassis, wheels, switches, and other components. It describes connecting a DPDT switch to control motors, fitting motors into frames, and modifying robots for games like robo-golf and robo-soccer. Price ranges for common robot parts are also listed.

Uploaded by

Javier Dorado Sánchez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

DPDT switch connection

Make the cross connection end-to-end terminal

Connect the motor with end terminal of DPDT


Connect the battery with middle terminal of DPDT
As shown in the image by RED & Black wire
As shown in the image by RED & Black spiral wire
Assembling the Robot

Chassis, wheel, DC Gear Motor DC Gear Motor

Remove the nut from the motor shaft Fit the motor in chassis(frame)
Assembling the Robot

Again tight the nut in shaft Do the same for another motor

Insert the wheel in motor shaft


Assambling of Dummy Motors

Dummy Motor Remove the nut from the Dummy Motor

Fit the dummy motor in chassis (frame) Again tight the nut in shaft
Your Robot is Ready for Robo-Race

Do the same for another dummy motor


Insert the wheel in motor shaft
Making of Remote

DPDT Remote/DPDT Switch Holder


Insert the required number of buttons in Holder

Cut the chassis (frame) for robo-golf and robo-soccer


Modifying Robot for Robo-Golf and Robo-Soccer

DC gear motor and paddle(you can make of anything) DC gear motor and paddle assembling
Your Robot is Ready for the Game

Mount the motor with paddle on the front Robot ready for Robo-Golf

Robot ready for Robo-soccer


Required Component and Maximum price at ORC
DC Gear Motor: 165 /- DPDT Switch Box: 30 /-

DPDT Switch : 30 /-
Side shaft(High Torque) Motor: 350 /-

BO Motor: 90 /-

Chassis(Frame) small: 70 /-
Chassis(Frame) small: 70 /- Wheel 7cm(2cm dia) : 30 /-
Wheel 7cm(4cm dia): 45 /-
Wheel 11cm(2cm dia): 65 /-
Wheel 11cm(4cm dia): 85 /-

You might also like