Aravali College of Engineering &

Management, Faridabad
3rd MCQ of Automation in Manufacturing

[email protected] Switch account

Draft saved

* Required

Email *

[email protected]

Name of Student *

Gaurav Rajput

Roll No. *

16

Class *

7th sem
1. What is automation? 2 points

(A) controlling a process by highly automatic means

(B) Automation is a Production

(C) Group Technology

(D) None of the above

Clear selection

2. An electromechanical energy conversion device is one which converts 2 points

(a) Electrical energy to mechanical energy only

(b) Mechanical energy to electrical energy only

(c) All of the mentioned

(d) None of the mentioned

Clear selection

3. The following is (are) the advantage(s) of Cellular manufacturing. 2 points

(A) Very little in-process inventory

(B) More job satisfaction

(C) Reduced flow times

(D) All of the above

Clear selection
4. A physical system of electromechanical energy conversion consists of a 2 points
stationary part creating a magnetic field with electric energy input, and a
moving part giving mechanical energy output. If the movable part is kept
fixed, the entire electrical energy input will be

(a) stored in the magnetic field

(b) stored in the electric field

(c) divided equally between the magnetic and electric fields

(d) zero

Clear selection

5. Hydraulic system include 2 points

a. Pump

b. Filter

c. Oil storage

d. All of these

Clear selection
6. In cell formation using production flow analysis, the following process 2 points
will be left out of the analysis

(A) Grinding

(B) Milling

(C) Drilling

(D) Gear cutting

Clear selection

7. Which of the following technique of grouping does not consider the 2 points

design and shape aspect?

(A) A simple and visual method of cell design

(B) Family formation by classification and codification

(C) Cell formation using Production Flow Analysis

(D) All of the above

Clear selection

8. The following is basically a material flow simplification technique. 2 points

(A) A simple and visual method of cell design

(B) Family formation by classification and codification

(C) Cell formation using Production Flow Analysis

(D) All of the above

Clear selection
9. The following cell formation technique is based on Component shape 2 points
and design?

(A) Production flow analysis

(B) Component flow analysis

(C) Composite component

(D) Simulation

Clear selection

10. Which element is used for oil conditioning in hydraulic system? 2 points

a. Pump b. Filters c. Heat exchangers d. (a) & (b)

b. Filter

c.Heat Exchangers

d. a & b

Clear selection

11. The most significant advantage of the U-shaped layout is 2 points

a) Cost minimization

b) Easy handling of process

c) Increased flexibility in work

d) All of the given options

Clear selection
12. A pneumatic symbol is 2 points

a) Different from a hydraulic symbol used for the same function

b) The same as a hydraulic symbol used for the same function

c) Not to be compared to a hydraulic symbol used for the same function

d) None of the mentioned

Clear selection

13. Most hydraulic circuits 2 points

a) Operate from a central hydraulic power unit

b) Use air-over-oil power units

c) Have a dedicated power unit

d) Does not have dedicated power unit

Clear selection

14. Hydraulic and pneumatic circuits 2 points

a) Perform the same way for all functions

b) Perform differently for all functions

c) Perform the same with some exceptions

d) Does not perform all the functions

Clear selection
15. The lubricator in a pneumatic circuit is the 2 points

a) First element in line

b) Second element in line

c) Last element in line

d) Third element in line

Clear selection

16. When comparing the operating cost of hydraulic systems to pneumatic 2 points
systems, generally they are

a) More expensive to operate

b) Less expensive to operate

c) Cost is same to operate

d) Cost is not required

Clear selection

17. The most common hydraulic fluid is 2 points

a) Mineral oil

b) Synthetic fluid

c) Water

d) Gel

Clear selection
18. Heavy lifting work is often accomplished by shifting fluids in big 2 points

machines. The power system of such machines can be described as

a) Reciprocating

b) Pneumatic

c) Hydraulic

d) Hybrid

Clear selection

19. The scientific principle that makes hydraulic systems possible is 2 points

a) Pascal’s principle

b) Boyle’s law

c) Bernoulli’s principle

d) The fluid flow principle

Clear selection

20. Pneumatic and other power systems can support three kinds of 2 points

motion; they are

a) Linear, reciprocating, and random motion

b) Linear, flowing, and rotary motion

c) Linear, zigzag, and spiral motion

d) Linear, reciprocating, and rotary motion

Clear selection
21. A single-acting cylinder can be pressurized externally from one 2 points
direction only.

a) True

b) False

Clear selection

22. A one-way valve that lets air into the reservoir of a compressor, but 2 points
doesn’t let it out, is a

a) Check valve

b) Receiver valve

c) Control valve

d) Three way valve

Clear selection

23. The ____________________ converts the compressed air energy into 2 points
mechanical energy in the form of linear movement in one direction only

a) Piston cylinders

b) Double acting cylinders

c) Single acting cylinders

d) Hydraulic pumps

Clear selection
 24. A _____________ restricts air flow 2 points

a) Throttle valve

b) Shuttle valve

c) Directional control valve

d) Single acting cylinder

Clear selection

25. When the piston area of the cylinder is connected to the atmosphere, 2 points
the piston of the single-acting cylinder is pressed by the spring to the
________________

a) Cylinder center

b) Cylinder down

c) Cylinder bottom

d) Cylinder upper

Clear selection

Submit Clear form

Never submit passwords through Google Forms.

This form was created inside of Aravali College of Engineering & Management. Report Abuse

 Forms