INFORMATION UPDATE! INFORMATION UPDATE! INFORMATION UPDATE!

New Products are featured along with information for newly added items noted by the red triangles:

INDUSTRIAL SHEET RUBBER,

M AT T I N G & S P E C I A LT Y ITEMS C ATA L O G

EDITION 0415
KSRCA0415 Telephone KOA for widths and lengths not shown. 1
 Index
45 Degree Beveled Skirtboard ..........................18 Honeycomb Comfort Matting..............................16
48" Wide Economy Skirtboard Slab Rubber ........17 Neoprene Cloth-Inserted Sheet.............................5
60 Durometer Skirtboard ..................................17 Neoprene Diaphragm Sheet..................................5
80 Durometer Skirtboard ...................................18 Neoprene Sheet................................................ 3-4
Black Cloth-Inserted SBR Sheet ...........................8 Nitrile Sheet .........................................................6
Black SBR Sheet...................................................8 Red Pure Gum Sheet...........................................12
Black “V” Corrugated Rubber Matting.................14 Red SBR Sheet Plate and Fabric Finish..................9
Black Wide-Ribbed Premium Rubber Matting......14 Silicone Sheet ....................................................12
Channel Rubber Strip..........................................15 Special Economy Skirtboard ..............................19
CSM Sheet .........................................................10 Tan Pure Gum Sheet...........................................13
EPDM Sheet........................................................11 Viton® Sheet........................................................10
FDA White Nitrile Sheet.........................................7

Index By Series Number

Series Page Series Page
B60 6 N80 4
B70 6 NCI 5
BL60 8 NDIA 5
BLKHCMAT 16 R75 9
CI 8 RF75 9
E60 11 REDHCMAT 16
ESK60 17 RG45 12
EZMAT 14 RTCHNL 15
GF40 13 SESK60 19
HFTCHNL 15 SESKBEV 18
HY60 10 SIL60 12
MAT 14 SK60 17
N40 3 SK80 18
N50 3 THCHNL 15
N60 3-4 VI70 10
N70 4 W60 7

All prices and specifications subject to change without notice.

2 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of Neoprene†
• Good weather-resistance
• Moderate resistance to petroleum-based fluids
• Good physical properties. NEOPRENE SHEET
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade black neoprene sheet, available in five styles:
Style N40: 40 Duro hardness (Shore Durometer A) Polymer: Chloroprene
Style N50: 50 Duro hardness (Shore Durometer A) Common Name: Neoprene
Style N60: 60 Duro hardness (Shore Durometer A) ISO/ASTM Designation: CR
Style N70: 70 Duro hardness (Shore Durometer A)
Style N80: 80 Duro hardness (Shore Durometer A)

ASTM Specification Temp. Tensile Strength

Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
N40 D 2000 M2BC 407 -20°F to +180°F 35 - 45 900 400% Plate
N50 D 2000 M2BC 507 -20°F to +180°F 45 - 55 1,000 400% Plate
N60 D 2000 M2BC 607 -20°F to +180°F 55 - 65 1,000 350% Plate
N70 D 2000 M2BC 707 -20°F to +180°F 65 - 75 1,000 350% Plate
N80 D 2000 M2BC 807 -20°F to +180°F 75 - 85 900 200% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
N40-02x36x67 1/16 x 36 67 96
N40-04x36x67 1/8 x 36 67 195
N40-06x36x36 3/16 x 36 36 158
N40-08x36x36 1/4 x 36 36 210
N40-02x48x67 1/16 x 48 67 128
N40-03x48x67 3/32 x 48 67 200
N40-04x48x67 1/8 x 48 67 256
N40-06x48x36 3/16 x 48 36 215
N40-08x48x36 1/4 x 48 36 280
N50-02x48x67 1/16 x 48 67 132
N50-04x48x36 1/8 x 48 36 142
N50-06x48x36 3/16 x 48 36 213
N50-08x48x18 1/4 x 48 18 142
N60-01x36x67 1/32 x 36 67 52
N60-02x36x67 1/16 x 36 67 99
N60-02x36x100 1/16 x 36 100 147
N60-03x36x67 3/32 x 36 67 149
N60-04x36x50 1/8 x 36 50 148
N60-04x36x67 1/8 x 36 67 198
N60-04x36x100 1/8 x 36 100 295
N60-06x36x36 3/16 x 36 36 161
N60-06x36x40 3/16 x 36 40 179
N60-06x36x50 3/16 x 36 50 223
N60-08x36x36 1/4 x 36 36 214
N60-08x36x40 1/4 x 36 40 238
N60-08x36x50 1/4 x 36 50 297
N60-12x36x18 3/8 x 36 18 160
N60-16x36x18 1/2 x 36 18 214
N60-16x36x25 1/2 x 36 25 297

KSRCA0415 Telephone KOA for widths and lengths not shown. 3

 NEOPRENE SHEET Neoprene (continued)

Gauge x Width Avg. Length Approx.

Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
N60-24x36x18 3/4 x 36 18 319
N60-24x36x25 3/4 x 36 25 443
N60-32x36x18 1 x 36 18 426
N60-32x36x25 1 x 36 25 592
N60-02x48x67 1/16 x 48 67 132
N60-02x48x100 1/16 x 48 100 197
N60-03x48x67 3/32 x 48 67 200
N60-04x48x36 1/8 x 48 36 142
N60-04x48x50 1/8 x 48 50 197
N60-06x48x36 3/16 x 48 36 213
N60-06x48x40 3/16 x 48 40 236
N60-06x48x50 3/16 x 48 50 296
N60-08x48x18 1/4 x 48 18 142
N60-08x48x40 1/4 x 48 40 316
N60-08x48x50 1/4 x 48 50 394
N60-12x48x18 3/8 x 48 18 213
N60-12x48x30 3/8 x 48 30 355
N60-16x48x18 1/2 x 48 18 284
N60-16x48x25 1/2 x 48 25 394
N60-16x48x30 1/2 x 48 30 471
N60-16x48x40 1/2 x 48 40 628
N60-24x48x18 3/4 x 48 18 425
N60-24x48x25 3/4 x 48 25 590
N60-32x48x18 1 x 48 18 567
N60-32x48x25 1 x 48 25 788
N70-02x48x67 1/16 x 48 67 132
N70-04x48x36 1/8 x 48 36 142
N70-06x48x36 3/16 x 48 36 213
N70-08x48x18 1/4 x 48 18 142
N80-02x36x50 1/16 x 36 50 74
N80-04x36x50 1/8 x 36 50 148
N80-06x36x50 3/16 x 36 50 223
N80-08x36x50 1/4 x 36 50 297
NOTE: N80 is also available in 48" width . . . contact Kuriyama of America.

4 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of Neoprene†
NEOPRENE

IT E W
EM
• Excellent physical properties.

N
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition. CLOTH-INSERTED
SHEET
SPECIFICATIONS:
Commercial grade black neoprene sheet, with nylon reinforcement:
Style NCI: 60 Duro hardness (Shore Durometer A) Common Name: Nylon-reinforced Neoprene Sheet
Polymer: Chloroprene reinforced with 3.4 oz./sq. yd. ISO/ASTM Designation: CR
nylon fabric
ASTM Specification Temp.
Style Ply Durometer Tensile Strength (PSI) Finish
(SI units) Range
NCI D 2000 M2BC 607 -20°F to +180°F 1 55 – 65 1100 Plate
NCI D 2000 M2BC 607 -20°F to +180°F 2 55 – 65 1100 Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number Fabric Plies
(in.) (Linear Ft. /Roll) Lbs./Roll
NCI-1P02x36x67 1/16 x 36 1 Ply 67 93
NCI-1P02x36x100 1/16 x 36 1 Ply 100 138
NCI-2P04x36x36 1/8 x 36 2 Ply 36 98
NCI-2P04x36x50 1/8 x 36 2 Ply 50 141
NCI-2P06x36x36 3/16 x 36 2 Ply 36 146
NCI-2P08x36x36 1/4 x 36 2 Ply 36 196
NCI-2P08x36x50 1/4 x 36 2 Ply 50 273
NCI-2P04x48x50 1/8 x 48 2 Ply 50 181
NCI-2P08x48x50 1/4 x 48 2 Ply 50 364

General Properties of Neoprene†

• Excellent physical properties.
NEOPRENE
† Properties shown based on Rubber Manufacturers DIAPHRAGM
SHEET
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade black neoprene sheet, with nylon reinforcement:
Style NDIA: 60 Duro hardness (Shore Durometer A) Common Name: Nylon-reinforced Neoprene Sheet
Polymer: Chloroprene reinforced with 14.5 oz./sq. yd. ISO/ASTM Designation: CR
nylon fabric
ASTM Specification Temp.
Style Ply Durometer Tensile Strength (PSI) Finish
(SI units) Range
NDIA D2000 - M2BC607 -20°F to +180°F 1&2 55-65 1015 Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
NDIA-1P02X48X50 1/16 x 48 50 66
NDIA-2P04X48X50 1/8 x 48 50 167
NDIA-2P06X48X50 3/16 x 48 50 221
NDIA-2P08X48X50 1/4 x 48 50 289

KSRCA0415 Telephone KOA for widths and lengths not shown. 5

 General Properties of Nitrile†
EM W
S
IT N E • Excellent resistance to petroleum-based fluids.
NITRILE SHEET • Good physical properties.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:
Commercial grade black nitrile sheet:
Style B60: 60 Duro hardness (Shore Durometer A) Common Name: Nitrile, Buna-N
Polymer: Nitrile-Butadiene ISO/ASTM Designation: NBR
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
B60 D 2000 M5BG 607 -30°F to +200°F 55 – 65 1000 350% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
B60-01x36x67 1/32 x 36 67 56
B60-02x36x67 1/16 x 36 67 100
B60-02x36x100 1/16 x 36 100 149
B60-03x36x67 3/32 x 36 67 150
B60-04x36x67 1/8 x 36 67 200
B60-04x36x100 1/8 x 36 100 299
B60-06x36x36 3/16 x 36 36 161
B60-06x36x50 3/16 x 36 50 224
B60-08x36x36 1/4 x 36 36 215
B60-08x36x50 1/4 x 36 50 299
B60-02x48x67 1/16 x 48 67 133
B60-02x48x100 1/16 x 48 100 199
B60-04x48x50 1/8 x 48 50 198
B60-04x48x67 1/8 x 48 67 266
B60-06x48x36 3/16 x 48 36 215
B60-06x48x50 3/16 x 48 50 298
B60-08x48x36 1/4 x 48 36 287
B60-08x48x50 1/4 x 48 50 399
B70-04x48x50 1/8 x 48 50 198
B70-04x48x100 1/8 x 48 100 376
B70-06x48x50 3/16 x 48 50 298
B70-08x48x50 1/4 x 48 50 398

6 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of Nitrile†
FDA WHITE

EM W
• Excellent resistance to petroleum-based fluids.

S
IT N E
• Good physical properties.
† Properties shown based on Rubber Manufacturers NITRILE SHEET
Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:
Food grade white nitrile sheet, made from FDA-approved materials (Title 21 Food and Drug S 177.26000)
Style W60: 60 Duro hardness (Shore Durometer A) Common Name: Nitrile, Buna-N
Polymer: Nitrile-Butadiene ISO/ASTM Designation: NBR
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
W60 D 2000 M1BG 608 -31°F to +230°F 55 – 65 1100 400% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
W60-02x36x50 1/16 x 36 50 69
W60-02x36x67 1/16 x 36 67 92
W60-03x36x67 3/32 x 36 67 137
W60-04x36x36 1/8 x 36 36 98
W60-04x36x50 1/8 x 36 50 136
W60-06x36x18 3/16 x 36 18 74
W60-06x36x50 3/16 x 36 50 205
W60-08x36x18 1/4 x 36 18 98
W60-08x36x50 1/4 x 36 50 272
W60-02x48x36 1/16 x 48 36 66
W60-02x48x50 1/16 x 48 50 92
W60-04x48x36 1/8 x 48 36 131
W60-04x48x50 1/8 x 48 50 182
W60-06x48x18 3/16 x 48 18 98
W60-06x48x50 3/16 x 48 50 270
W60-08x48x18 1/4 x 48 18 131
W60-08x48x50 1/4 x 48 50 363

KSRCA0415 Telephone KOA for widths and lengths not shown. 7

 BLACK General Properties of SBR†
CLOTH-INSERTED • Excellent physical properties.

SBR SHEET † Properties shown based on Rubber Manufacturers

Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade black SBR sheet, with cloth reinforcement:
Style CI: 60 Duro hardness (Shore Durometer A) Common Name: Cloth-reinforced Black Rubber Sheet
Polymer: Styrene-Butadiene Rubber reinforced with ISO/ASTM Designation: SBR
3.4 oz./sq. yd. nylon fabric
ASTM Specification Temp. Tensile Strength
Style Ply Durometer Finish
(SI units) Range (PSI)
CI D 2000 M2AA 603 -20°F to +170°F 1 55 – 65 600 Plate
CI D 2000 M2AA 603 -20°F to +170°F 2 55 – 65 600 Plate
CI D 2000 M2AA 603 -20°F to +170°F 3 55 – 65 600 Plate
CI D 2000 M2AA 603 -20°F to +170°F 4 55 – 65 600 Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number Fabric Plies
(in.) (Linear Ft. /Roll) Lbs./Roll
CI-1P02x48x67 1/16 x 48 1 Ply 67 132
CI-1P04x48x36 1/8 x 48 1 Ply 36 140
CI-2P04x48x36 1/8 x 48 2 Ply 36 140
CI-2P04x48x50 1/8 x 48 2 Ply 50 194
CI-2P06x48x18 3/16 x 48 2 Ply 18 107
CI-2P08x48x18 1/4 x 48 2 Ply 18 140
CI-2P08x48x25 1/4 x 48 2 Ply 25 194
CI-2P08x48x50 1/4 x 48 2 Ply 50 388
CI-3P06x48x18 3/16 x 48 3 Ply 18 107
CI-4P08x48x18 1/4 x 48 4 Ply 18 140

General Properties of SBR†

BLACK SBR SHEET • Good physical properties.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade black SBR sheet:
Style BL60: 65 Duro hardness (Shore Durometer A) Common Name: Black Rubber Sheet
Polymer: Styrene-Butadiene ISO/ASTM Designation: SBR
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
BL60 D 2000 M1AA 604 -13°F to +158°F 60 – 70 600 200% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
BL60-02x48x67 1/16 x 48 67 131
BL60-04x48x36 1/8 x 48 36 140
BL60-08x48x18 1/4 x 48 18 140

8 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of SBR†
• Good physical properties.
RED SBR SHEET
† Properties shown based on Rubber Manufacturers Plate & Fabric Finish
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade red SBR sheet, Plate or Fabric Finish:
Style R75: 70 Duro hardness (Shore Durometer A) Common Name: Red Rubber Sheet
Style RF75: 70 Duro hardness (Shore Durometer A) ISO/ASTM Designation: SBR
Polymer: Styrene-Butadiene Meets D1330 Grade 1
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
R75 D 2000 M1AA 705 -22°F to +158°F 65 – 75 600 200% Plate
RF75 D 2000 M1AA 705 -22°F to +158°F 65 – 75 600 200% Fabric
Impression
ORDERING INFORMATION:
Item Number
Gauge x Width Avg. Length Approx.
Plate Fabric
(in.) (Linear Ft./Roll) Lbs./Roll
Finish Impression
R75-02x36x67 RF75-02x36x67 1/16 x 36 67 106
R75-04x36x36 RF75-04x36x36 1/8 x 36 36 114
R75-04x36x50 1/8 x 36 50 158
R75-06x36x36 RF75-06x36x36 3/16 x 36 36 171
R75-08x36x18 RF75-08x36x18 1/4 x 36 18 114
R75-08x36x25 1/4 x 36 25 158
R75-08x36x50 1/4 x 36 50 316
R75-02x48x67 RF75-02x48x67 1/16 x 48 67 141
R75-03x48x67 RF75-03x48x67 3/32 x 48 67 211
R75-04x48x36 RF75-04x48x36 1/8 x 48 36 152
R75-04x48x50 1/8 x 48 50 211
R75-06x48x36 RF75-06x48x36 3/16 x 48 36 228
R75-08x48x18 RF75-08x48x18 1/4 x 48 18 152
R75-08x48x25 1/4 x 48 25 211
R75-08x48x50 1/4 x 48 50 422

KSRCA0415 Telephone KOA for widths and lengths not shown. 9

 General Properties of of VITON®
• Excellent resistance to many concentrated acids.
VITON SHEET ®
• Excellent resistance to heat.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

Note: VITON® is a registered trademark

SPECIFICATIONS: of DuPont Dow Elastomers.
Commercial grade black VITON® sheet:
Style VI70: 72 Duro hardness (Shore Durometer A) Common Name: Viton
Polymer: Hexaflouropropylene Vinylidene Flouride ISO/ASTM Designation: FKM
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
VI70 D 2000 M1HK 704 -14°F to +482°F 72 600 165% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
VI70-01x36x30 1/32 x 36 30 29
VI70-02x36x10 1/16 x 36 10 19
VI70-02x36x30 1/16 x 36 30 58
VI70-03x36x10 3/32 x 36 10 28
VI70-03x36x30 3/32 x 36 30 85
VI70-04x36x10 1/8 x 36 10 37
VI70-04x36x15 1/8 x 36 15 55
VI70-04x36x30 1/8 x 36 30 110
VI70-06x36x10 3/16 x 36 10 57
VI70-06x36x30 3/16 x 36 30 170
VI70-08x36x10 1/4 x 36 10 74
VI70-08x36x15 1/4 x 36 15 111
VI70-08x36x30 1/4 x 36 30 222

General Properties of of CSM

• Excellent resistance to oxidation and outstanding
CSM SHEET resistance to strong sunlight and ozone.
• Good resistance to general acids, oils and greases.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
CSM rubber sheet:
Style HY60: 60 Duro hardness (Shore Durometer A) Common Name: CSM
Polymer: Chlorosulphonated Polyethylene ISO/ASTM Designation: CSM
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
HY60 D 2000 M1CE 614 -31°F to +257°F 55 – 65 1400 350% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
HY60-02x36x67 1/16 x 36 67 88
HY60-04x36x67 1/8 x 36 67 176
HY60-06x36x36 3/16 x 36 36 142
HY60-08x36x36 1/4 x 36 36 190

10 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of EPDM†

EM W
S
IT N E
• Good ozone, chemical and aging resistance.
† Properties shown based on Rubber Manufacturers
EPDM SHEET
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Commercial grade black EPDM sheet:
Style E60: 60 Duro hardness (Shore Durometer A) Common Name: Ethylene-Propylene Rubber
Polymer: Ethylene-Propylene-Diene-Monomer ISO/ASTM Designation: EPDM
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
E60 D 2000 M2BA 608 -20°F to +230°F 55 – 65 1100 350% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
E60-02x36x67 1/16 x 36 67 92
E60-02x36x100 1/16 x 36 100 137
E60-04x36x50 1/8 x 36 50 137
E60-04x36x67 1/8 x 36 67 183
E60-06x36x36 3/16 x 36 36 148
E60-08x36x36 1/4 x 36 36 197
E60-08x36x50 1/4 x 36 50 274
E60-02x48x67 1/16 x 48 67 122
E60-02x48x100 1/16 x 48 100 182
E60-04x48x50 1/8 x 48 50 182
E60-04x48x67 1/8 x 48 67 244
E60-06x48x36 3/16 x 48 36 197
E60-08x48x36 1/4 x 48 36 263
E60-08x48x50 1/4 x 48 50 365

KSRCA0415 Telephone KOA for widths and lengths not shown. 11

 General Properties of Silicone†
• Excellent resistance to heat.
SILICONE SHEET • Good physical properties.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.
SPECIFICATIONS:
Commercial grade red silicone sheet:
Style SIL60: 60 Duro hardness (Shore Durometer A) Common Name: Silicone
Polymer: Polydimethysiloxane ISO/ASTM Designation: FE
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
SIL60 D 2000 M2FE 607 B37 -94°F to +392°F 55 – 65 1100 300% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
SIL60-01x36x35 1/32 x 36 35 22
SIL60-02x36x35 1/16 x 36 35 44
SIL60-03x36x35 3/32 x 36 35 67
SIL60-04x36x35 1/8 x 36 35 89
SIL60-06x36x35 3/16 x 36 35 133
SIL60-08x36x35 1/4 x 36 35 178
SIL60-01x48x35 1/32 x 48 35 30
SIL60-02x48x35 1/16 x 48 35 59
SIL60-03x48x35 3/32 x 48 35 89
SIL60-04x48x35 1/8 x 48 35 118
SIL60-06x48x35 3/16 x 48 35 178
SIL60-08x48x35 1/4 x 48 35 237

General Properties of of Red Gum†

RED PURE GUM • Excellent physical properties.

SHEET
• High abrasion-resistance.
• Good resilience.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Red pure gum rubber sheet:
Style RG45: 45 Duro hardness (Shore Durometer A) ISO/ASTM Designation: NR
Polymer: Isoprene rubber (natural) ASTM Specification Temp. Tensile Strength Elongation
Common Name: Natural Rubber Sheet
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
RG45 D 2000 M1AA 414 -40°F to +185°F 40 – 50 2400 600% Plate
ORDERING INFORMATION:
Item Number Gauge x Width Avg. Length Approx.
(in.) (Linear Ft. /Roll) Lbs./Roll
RG45-04x48x36 1/8 x 48 36 94
RG45-08x48x25 1/4 x 48 25 137
RG45-12x48x25 3/8 x 48 25 205
RG45-16x48x25 1/2 x 48 25 273
RG45-24x48x25 3/4 x 48 25 410
RG45-32x48x25 1 x 48 25 546

12 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of of Pure Gum†

EM W
S
IT N E
• Excellent physical properties.
• Excellent abrasion-resistance. TAN PURE GUM
• Excellent low temperature resistance.
• Good resistance to most acids.
SHEET
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

SPECIFICATIONS:
Tan pure gum rubber sheet:
Style GF40: 40 Duro hardness (Shore Durometer A) Common Name: Natural Rubber Sheet
Polymer: Isoprene rubber (natural) ISO/ASTM Designation: NR
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
GF40 D 2000 M1AA 424 -40°F to +176°F 35 – 45 3400 600% Plate
ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
GF40-01x36x67 1/32 x 36 67 34
GF40-02x36x67 1/16 x 36 67 65
GF40-04x36x50 1/8 x 36 50 99
GF40-04x36x67 1/8 x 36 67 131
GF40-06x36x50 3/16 x 36 50 149
GF40-06x36x67 3/16 x 36 67 196
GF40-08x36x36 1/4 x 36 36 140
GF40-08x36x50 1/4 x 36 50 199
GF40-12x36x36 3/8 x 36 36 211
GF40-12x36x50 3/8 x 36 50 298
GF40-16x36x18 1/2 x 36 18 140
GF40-16x36x25 1/2 x 36 25 199
GF40-24x36x18 3/4 x 36 18 211
GF40-24x36x25 3/4 x 36 25 298
GF40-32x36x18 1 x 36 18 281
GF40-32x36x25 1 x 36 25 397
GF40-02x48x67 1/16 x 48 67 87
GF40-04x48x36 1/8 x 48 36 94
GF40-06x48x36 3/16 x 48 36 140
GF40-06x48x50 3/16 x 48 50 199
GF40-08x48x18 1/4 x 48 18 94
GF40-08x48x50 1/4 x 48 50 265
GF40-12x48x50 3/8 x 48 50 397
GF40-16x48x25 1/2 x 48 25 264
GF40-24x48x25 3/4 x 48 25 397
GF40-32x48x25 1 x 48 25 530

KSRCA0415 Telephone KOA for widths and lengths not shown. 13

 BLACK
“V” CORRUGATED
RUBBER MATTING

SPECIFICATIONS:
Blended SBR/Natural Rubber
Provides floor protection in entrances and hallways
in offices and plants. “V” corrugation allows for easy
cleaning.

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number Temp. Range
(in.) (Linear Ft. /Roll) Lbs./Roll
MAT-04x24x75 1/8 x 24 -13°F to +158°F 75 101
MAT-04x36x75 1/8 x 36 -13°F to +158°F 75 152
MAT-04x48x75 1/8 x 48 -13°F to +158°F 75 203

BLACK WIDE-RIBBED
PREMIUM RUBBER
MATTING

SPECIFICATIONS:
Made with a blend of SBR/Natural Rubber
for tough, long lasting service.
This premium wide-ribbed rubber matting is Features:
ideal for many uses: • Easy to maintain
• Factory work stations • Easy to clean:
• Hallway runners ° Wet Mop ° Household Broom
• Protective covering for carpets ° Garden Hose ° Vacuum Cleaner

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number Temp. Range
(in.) (Linear Ft. /Roll) Lbs./Roll
EZMAT-04x24x75 1/8 x 24 -13°F to +158°F 75 111
EZMAT-04x36x75 1/8 x 36 -13°F to +158°F 75 167
EZMAT-04x48x75 1/8 x 48 -13°F to +158°F 75 222

14 Telephone KOA for widths and lengths not shown. KSRCA0415

 CHANNEL RUBBER
STRIP

STYLE RTCHNL STYLE THCHNL STYLE HFTCHNL

Round Top Tapered Hex Hex Flat Top
Flat Top

SPECIFICATIONS:
Commercial grade black EPDM channel:
Hardness: 65 Duro hardness (Shore Durometer A) This channel rubber strip is ideal for use as a
Tensile Strength: 1,650 PSI protective edge on shaker screens and a variety of
Elongation: 310% other types of industrial equipment.
Standard Round Top Channel
A C
Channel Dimension (in.)
Item Number
Size (in.) A B C D
RTCHNL-04x200 1/4 0.25 0.81 0.44 0.56 D
RTCHNL-06x200 3/8 0.38 1.00 0.50 0.50
RTCHNL-08x100 1/2 0.50 1.25 0.56 0.63
RTCHNL-12x100 3/4 0.75 1.20 0.63 1.40 B

Tapered Hex-Flat Top Channel

Channel Dimension (in.) A C
Item Number
Size (in.) A B C D
THCHNL-04x200 1/4 0.25 0.65 0.38 0.63
THCHNL-06x200 3/8 0.38 0.85 0.50 0.63 D
THCHNL-08x100 1/2 0.50 1.20 0.50 0.69
THCHNL-12x100 3/4 0.75 1.45 0.50 0.75 B

Hex-Flat Top Channel

Channel Dimension (in.)
Item Number
Size (in.) A B C D A C
HFTCHNL-04x200 1/4 0.25 0.75 0.31 0.38
HFTCHNL-06x200 3/8 0.38 0.88 0.31 0.44 D
HFTCHNL-08x100 1/2 0.50 1.00 0.44 0.50
HFTCHNL-12x100 3/4 0.75 1.25 0.50 0.63 B

ORDERING INFORMATION:
Channel Size Roll Length Approx.
Item Number
(in.) Linear Ft. Lbs./Roll
RTCHNL-04x200 1/4 200 50
RTCHNL-06x200 3/8 200 70
RTCHNL-08x100 1/2 100 51
RTCHNL-12x100 3/4 100 70
THCHNL-04x200 1/4 200 44
THCHNL-06x200 3/8 200 64
THCHNL-08x100 1/2 100 48
THCHNL-12x100 3/4 100 62
HFTCHNL-04x200 1/4 200 34
HFTCHNL-06x200 3/8 200 42
HFTCHNL-08x100 1/2 100 44
HFTCHNL-12x100 3/4 100 40

KSRCA0415 Telephone KOA for widths and lengths not shown. 15

 General Properties of of Nitrile†
HONEYCOMB • Excellent resistance to petroleum-based fluids.

COMFORT MATTING
• Good physical properties.

General Properties of of SBR†

• Good physical properties.
† Properties shown based on Rubber Manufacturers
Association Sheet Rubber Handbook, second edition.

Colors Available:
Black — SBR
Red — Nitrile
(Oil Resistant)

Honeycomb pattern provides non-slip

surface . . . allows water to drain off.

SPECIFICATIONS: Black Comfort Matting:

Polymer: Styrene-Butadiene
Hardness: 55 Duro hardness (Shore Durometer A)
Common Name: Black Rubber
Tensile Strength: 240 PSI
ISO/ASTM Designation: SBR
Elongation: 300%
Cold Resistance: -20° F.
Red Comfort Matting:
Polymer: Nitrile-Butadiene
Common Name: Nitrile, Buna-N
ISO/ASTM Designation: NBR

ORDERING INFORMATION:
Gauge Approx.
Item Number Size (ft.)
Thickness (in.) Lbs./Piece
BLKHCMAT-3x3 5/8 3x3 16
REDHCMAT-3x3 5/8 3x3 16

16 Telephone KOA for widths and lengths not shown. KSRCA0415

General Properties of 60
Durometer Skirtboard Rubber
60 DUROMETER
• Excellent abrasion-resistance. SKIRTBOARD
• Excellent weather-resistance
RUBBER
SPECIFICATIONS: PACKAGING: 50 Ft. Rolls
Blended SBR/NR slit sheet, Plate Finish:
Style SK60: 60 Duro hardness (Shore Durometer A) Color: Black
Polymer: Styrene-Butadiene and Common Name: Skirtboard Rubber
Isoprene Rubber, Natural ISO/ASTM Designation: SBR/NR
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
SK60 D 2000 M1AA 608 -22°F to +158°F 55 – 65 1100 400% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
SK60-08x3x50 1/4 x 3 50 23
SK60-08x4x50 1/4 x 4 50 30
SK60-08x5x50 1/4 x 5 50 38
SK60-08x6x50 1/4 x 6 50 45
SK60-08x8x50 1/4 x 8 50 61
SK60-08x10x50 1/4 x 10 50 76
SK60-08x12x50 1/4 x 12 50 91
SK60-12x3x50 3/8 x 3 50 34
SK60-12x4x50 3/8 x 4 50 45
SK60-12x5x50 3/8 x 5 50 57
SK60-12x6x50 3/8 x 6 50 68
SK60-12x8x50 3/8 x 8 50 91
SK60-12x10x50 3/8 x 10 50 114
SK60-12x12x50 3/8 x 12 50 136
SK60-16x3x50 1/2 x 3 50 45
SK60-16x4x50 1/2 x 4 50 61
SK60-16x5x50 1/2 x 5 50 76
SK60-16x6x50 1/2 x 6 50 91
SK60-16x8x50 1/2 x 8 50 121
SK60-16x10x50 1/2 x 10 50 151
SK60-16x12x50 1/2 x 12 50 182
SK60-24x3x50 3/4 x 3 50 68
SK60-24x6x50 3/4 x 6 50 136
SK60-24x8x50 3/4 x 8 50 182
SK60-24x9x50 3/4 x 9 50 205
SK60-24x10x50 3/4 x 10 50 227
SK60-24x12x50 3/4 x 12 50 273
SK60-32x3x50 1x3 50 91
SK60-32x6x50 1x6 50 182
SK60-32x8x50 1x8 50 242
SK60-32x10x50 1 x 10 50 303
SK60-32x12x50 1 x 12 50 363
SK60-48x10x50 1 1/2 x 10 50 455
48" Wide Economy Skirtboard Slab Rubber
ESK60-08x48x50 1/4 x 48 50 363
ESK60-12x48x50 3/8 x 48 50 545
ESK60-16x48x50 1/2 x 48 50 727
ESK60-24x48x50 3/4 x 48 50 1090
ESK60-32x48x50 1 x 48 50 1454

KSRCA0415 Telephone KOA for widths and lengths not shown. 17

 80 DUROMETER General Properties of
SKIRTBOARD 80 Durometer Skirtboard Rubber
• Excellent abrasion-resistance.
RUBBER • Excellent weather-resistance.

SPECIFICATIONS: PACKAGING: 50 Ft. Rolls

Blended NR slit sheet, Plate Finish:
Style SK80: 80 Duro hardness (Shore Durometer A) Tensile Strength: 600 PSI
Polymer: Natural and Synthetic Rubber Elongation: 200%
Color: Black Applications:
Common Name: Skirtboard Rubber Slit to width for Belt Wipers, Snow Plow Blades and
ISO/ASTM Designation: NR Squeegee use.
ASTM Specification Temp. Tensile Strength
Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
SK80 D 2000 M1AA 802 -22°F to +158°F 75 – 85 600 200% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
SK80-16x4x50 1/2 x 4 50 61
SK80-16x6x50 1/2 x 6 50 91
SK80-16x8x50 1/2 x 8 50 121
SK80-24x6x50 3/4 x 6 50 137
SK80-24x8x50 3/4 x 8 50 182
SK80-32x6x50 1x6 50 182
SK80-32x8x50 1x8 50 243
SK80-32x10x50 1 x 10 50 303
SK80-32x12x50 1 x 12 50 364

45 DEGREE BEVELED
SKIRTBOARD
SPECIFICATIONS: PACKAGING: 50 Ft. Rolls
Blended SBR/Gum Rubber - Plate Finish
Common Name: Skirtboard Rubber
ASTM Specification Temp. Tensile Strength Elongation
Style Durometer Finish
(SI units) Range (PSI) (%)

SESKBEV D2000 MIAA 654 -20°F to +180°F 60-70 610 250% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
SESKBEV-12x4x50 3/8 x 4 50 42
SESKBEV-12x5x50 3/8 x 5 50 53
SESKBEV-12x6x50 3/8 x 6 50 63
SESKBEV-12x8x50 3/8 x 8 50 84
SESKBEV-16x4x50 1/2 x 4 50 56
SESKBEV-16x5x50 1/2 x 5 50 71
SESKBEV-16x6x50 1/2 x 6 50 85
SESKBEV-16x8x50 1/2 x 8 50 113

18 Telephone KOA for widths and lengths not shown. KSRCA0415

 SPECIAL
ECONOMY
SKIRTBOARD
SPECIFICATIONS: PACKAGING: 50 Ft. Rolls
Blended SBR/Gum Rubber - Plate Finish
Style SESK: 65 Duro hardness (Shore A)

ASTM Specification Temp. Tensile Strength

Style Durometer Elongation (%) Finish
(SI units) Range (PSI)
SESK60 D 2000 M1AA654 -22°F to +158°F 60 – 70 610 250% Plate

ORDERING INFORMATION:
Gauge x Width Avg. Length Approx.
Item Number
(in.) (Linear Ft. /Roll) Lbs./Roll
SESK60-08x3x50 1/4 x 3 50 21
SESK60-08x4x50 1/4 x 4 50 28
SESK60-08x6x50 1/4 x 6 50 43
SESK60-08x8x50 1/4 x 8 50 57
SESK60-08x10x50 1/4 x 10 50 71
SESK60-08x12x50 1/4 x 12 50 85
SESK60-12x3x50 3/8 x 3 50 32
SESK60-12x4x50 3/8 x 4 50 42
SESK60-12x6x50 3/8 x 6 50 63
SESK60-12x8x50 3/8 x 8 50 84
SESK60-12x10x50 3/8 x 10 50 105
SESK60-12x12x50 3/8 x 12 50 127
SESK60-16x3x50 1/2 x 3 50 42
SESK60-16x4x50 1/2 x 4 50 56
SESK60-16x5x50 1/2 x 5 50 71
SESK60-16x6x50 1/2 x 6 50 85
SESK60-16x8x50 1/2 x 8 50 113
SESK60-16X10X12 1/2 x 10 50 141
SESK60-16x12x50 1/2 x 12 50 169
SESK60-24x3x50 3/4 x 3 50 63
SESK60-24x4x50 3/4 x 4 50 85
SESK60-24x6x50 3/4 x 6 50 127
SESK60-24x8x50 3/4 x 8 50 165
SESK60-24x10x50 3/4 x 10 50 211
SESK60-24x12x50 3/4 x 12 50 253
SESK60-32x3x50 1x3 50 85
SESK60-32x4x50 1x4 50 113
SESK60-32x6x50 1x6 50 169
SESK60-32x8x50 1x8 50 226
SESK60-32x10x50 1 x 10 50 282
SESK60-32x12x50 1 x 12 50 339

KSRCA0415 Telephone KOA for widths and lengths not shown. 19

 SHEET RUBBER GLOSSARY
Adhesion: (1) Basically, the adhering, clinging, stress relaxation properties of rubber.
bonding or sticking of two material surfaces to
Cracking: A sharp break or fissure in the surface.
one another, such as rubber to rubber, rubber to
Generally due to excessive strain.
glass, rubber to metal, rubber to wood, rubber
to fabric, rubber to cord, rubber to wire, etc. (2) Crazing: A surface effect on rubber articles
Refers to the strength of bond between cured characterized by multitudinous minute cracks.
rubber surfaces or cured rubber surface and a
Cure: The act of vulcanization.
non-rubber surface.
Curing Temperature: The temperature at which
Aging: To undergo changes to physical properties
the rubber is vulcanized.
with age or lapse of time.
Diaphragm Sheet: Sheet (generally fabric-
Aging, Air Oven: A means of accelerating
reinforced rubber) from which flat diaphragms
the change in physical properties of rubber
may be cut.
compounds by exposing them to the action of air
at an elevated temperature. Die Cut: Shaped articles punched from a sheet of
rubber with a die.
Ambient Temperature: The environment
temperature surrounding the object under Dielectric Strength: The measure of electric
consideration. potential strength of a rubber product. Measure
of its ability as an insulating compound to resist
Blemish: A mark, deformity, or injury which
passage of a disruptive discharge produced by
impairs the appearance.
an electric stress. Measure as volts per mil of
Blisters: A raised spot on the surface or a thickness.
separation between layers usually forming a void
Durometer: An instrument for measuring the
or air-filled space in the vulcanized article. (See
hardness of rubber. Measures resistance to the
bubbles, sinks and voids.)
penetration of an indentor point into the surface
Bloom: A coating or efflorescence creating a of the rubber.
discoloration or change in appearance of the
Durometer Hardness: An arbitrary numerical
surface of a rubber product caused by the
value which measures the resistance to
migration of a liquid or solid to the surface.
penetration of the indentor point of the durometer.
Examples: Sulfur Bloom, Wax Bloom. Not to be
Value may be taken immediately or after a very
confused with dust on the surface from external
short specified time.
sources.
Elastomer: Macromolecular material that returns
Calendered: Continuously sheeted or plied up
rapidly to approximately the initial dimensions
rubber compound or fabric that is frictioned or
and shape after substantial deformation by a
coated with rubber compound on a machine
weak stress and release of stress.
equipped with three or more heavy internally
heated or cooled rolls revolving in opposite Elongation: Increase in length expressed
direction. numerically as a fraction or percentage of initial
length.
Checking: Short, shallow cracks on the surface,
generally due to effect of destructive action of Filler: (1) A material incorporated into a rubber
environmental conditions. compound to increase its bulk. (2) A compound
built into a rubber product to increase its bulk
C. I. (Cloth-inserted): An abbreviation used
and/or improve its appearance. (3) Sometimes
to indicate a sheet of rubber containing one or
erroneously used to mean “filling" in textiles.
more plies of cloth or duck, in which the cloth is
completely covered with rubber. Finish, Fabric: Same as impress, fabric.
Cloth Impression: Same as fabric impression. Finish, Paper: Finish resulting from curing in
contact with paper.
Coating: A layer of material covering a surface.
Finish Plate or Platen: Same as plate finish
Compression Set: The deformation which
(sheet).
remains in rubber after it has been subjected
to and released from a specific compressive Foreign Material: Any extraneous matter such
stress for a definite period of time at a prescribed as wood, paper, metal, sand, dirt or pigment that
temperature. Compression set measurements are should not normally be present in a particular
made for the purpose of evaluating the creep and rubber product or composition.

20 Telephone KOA for widths and lengths not shown. KSRCA0415

 SHEET RUBBER GLOSSARY
Gauge: (1) The measure of thickness of the the same of different. There are copolymers, di-
individual elements making up a rubber product. polymers, tri or ter polymers, quadri-polymers,
(2) A device for measuring. (See thickness.) high polymers, etc. Natural rubber is a polymer of
Isoprene.
Grain: The effect on a rubber compound due to
processing it through a tubing machine, calender, Press Length: The length of a product which can
or mill. be vulcanized at one time in a press, limited to
the length measurement of the press.
Hardness: Property or extent of being hard.
Measured by extent of failure of the indentor Random Length: A unit of material which
point of any one of a number of standard does not fall into any current classification for
hardness testing instruments to penetrate the standard length.
product.
Relative Humidity: The ration of the quantity of
Homogeneity: Uniformity of composition water vapor actually present in the atmosphere
throughout the material. to the greatest amount possible at the given
temperature.
Homogeneous: Of uniform composition
throughout. Roll: Sheet rubber and gasket material of a
uniform width rolled up on itself from which
Impression: Design formed during vulcanization
gaskets and other products of lesser
in the surface of any rubber article by a method
dimensions and various shapes may be cut.
of transfer, such as fabric impression or molded
impression. Rubber: A material that is capable of recovering
from large deformations quickly and forcibly, and
Impression, Fabric: Impression formed during
can be, or already is, modified to a state in which
cure by fabric wrap.
it is essentially insoluble (but can swell) in boiling
Laminated: Built up from thinner layers. solvent, such as benzene, methyl ethyl ketone,
and ethanol-toluene azeotrope.
Modulus: In the physical testing of rubber, it
is the ratio of stress to strain; that is, the load Sinks: A collapsed blister or bubble leaving a
in pounds per square inch or kilograms per depression in the product.
square centimeter of initial cross sectional-
Slab: Thick sheet, generally laminated.
area necessary to produce a stated percentage
elongation. It is a measure of stiffness. Specific Gravity: The ratio of the weight of a
given substance to the weight of an equal
Non-blooming: The absence of bloom.
volume of water at a specified temperature.
Oxidation: The reaction of oxygen on a rubber
Tacky (Rubber Surface): Tending to adhere.
product, usually detected by a change in the
appearance or feel of the surface, or by a change Tensile Strength: The maximum tensile stress
in physical properties applied during stretching a specimen to rupture.
Ozone Cracking: Surface cracks, checks or Viscosity: A manifestation of internal friction
crazing caused by exposure to an atmosphere opposed to mobility. The property of fluids
containing ozone. (See also ozone resistant.) and plastic solids by which they resist an
instantaneous change of shape, i.e., resistant to
Ozone Resistant: Withstands the deteriorating
flow.
effects of ozone, generally cracking.
Volume Swell: Increase in physical size caused
Plate Finish (Sheet): A commercially smooth
by the swelling action of a liquid.
surface, the usual result of vulcanization between
press plates (platens). Vulcanization: Act or process of treating an
elastomer or compound of same to improve its
Ply: (1) A layer of rubberized fabric. (2) A layer
useful properties, usually accomplished by
consisting of multiple strands of cord or wire
application of heat.
close spaced. (3) A single yarn in a composite
yarn. (4) Used in processing as a layer of Warp: The yarns that run lengthwise in a woven
unvulcanized rubber compound. fabric.
Polymer: A very long chain of units of monomers, Waft: The crosswise threads in a fabric; filling
prepared by means of an addition and/or threads. The threads or yarns running at right
condensation polymerization. The units may be angle to the warp.

KSRCA0415 Telephone KOA for widths and lengths not shown. 21

 General properties of common polymers
used in sheet rubber
Neoprene Nitrile EPDM SBR CI Pure Gum Silicone Viton Hypalon
Heat Aging Good Good Excellent Good Good Good Excellent Excellent Good
Abrasion Resistance Excellent Excellent Very Good Good Good Excellent Poor Fair Fair
Compression Set Fair Fair Fair Good Good Good Fair Good Good
Resilience Excellent Good Good Good Good Outstanding Fair Fair Fair
Tear Good Good Good Fair Good Good Good Fair Fair
Flame Resistance Excellent Poor Very Poor Very Poor Very Poor Very Poor Fair Good Good
Weathering Very Good Fair Excellent Fair Fair Fair Good Excellent Excellent
Ozone Resistance Very Good Very Poor Good Fair Fair Poor Good Excellent Excellent
Gas Permeability Good Good Good Good Good Good Poor Poor Poor
Resistance
Oil Resistance Good Very Good Very Poor Poor Poor Very Poor Fair Good Fair
Gas Resistance Good Excellent Very Poor Poor Poor Very Poor Poor Poor Poor
Acid Resistance Good Good Good Fair Fair Good Poor Good Good
Alkali Resistance Good Good Good Fair Fair Good Poor Good Good

TAKE NOTE!
The general properties shown in the chart above are not intended to be used to
make final choices for a specific application. Exposure to heat, sunlight, chemicals,
ozone and oils, as well as pressure, tension, binding, stretching and folding, will
affect the performance of a rubber product.

Suitability must be determined by a qualified person. See Cautionary Statement on

the next page.

Sheet Rubber Tolerances

(Tolerances conform to RMA standards, Durometer ± 5 points.)
Thickness Tolerance Thickness Tolerance
1/32" but not including 1/16"..........................± .012" 9/16" but not including 3/4"............................± .062"
1/16" but not including 1/8"............................± .016" 3/4" but not including 1".................................± .094"
1/8" but not including 3/16"............................± .020" 1" and Over...................................................... ± 10%
3/16" but not including 3/8"............................± .031" Width Tolerance
3/8" but not including 9/16"............................± .047" 36" and over...................................................± 1.00"

22 Telephone KOA for widths and lengths not shown. KSRCA0415

 Minimum Order: Full rolls only.
Sheet rubber and corrugated matting products this catalog are conservative minimums. Actual
are sold in full rolls only. These rolls are usually yield may vary upwards. All rolls are billed at
in one piece, but may contain a maximum of two the listed average linear ft./roll shown in our
pieces per ASTM D1330. The average weight per separate price list.
roll and linear feet per roll yield figures shown in

Storage of Rubber Products†

Rubber products in storage can be adversely affected by such factors humidity.
as temperature, ozone, sunlight, oils, solvents, corrosive liquids and
fumes, insects and rodents, and radiation. To protect against the adverse effects of ozone, rubber products
should not be stored near electrical equipment that may generate
The warehousing area should be relatively cool, dark and free from ozone and should not be stored for any lengthy period of time in
dampness and mildew. All items should be stored on a first-in first- geographical areas known to be high in ozone. Conditions of direct or
out basis, since even under these conditions an unusually long period reflected sunlight should also be avoided.
of storage could deteriorate certain rubber products.
Whenever feasible, rubber products should be stored in their original
The ideal storage temperature for rubber products is 50° to 70° F shipping containers, especially when such containers are wooden
(10° to 21° C), with a maximum limit of 100° F (38° C). If stored crates or cardboard cartons, since this will provide protection against
below 32° F (0° C), some products may become stiff and should be the deteriorating effects of oils, solvents and corrosive liquids, as
warmed before being placed in service. Rubber products should not well as affording some protection against ozone and sunlight.
be stored near sources of heat, such as radiators and baseboard Because certain rodents and insects thrive on rubber products,
heaters. adequate protection from them should be provided.
† Based on information from Rubber Manufacturers As-
Rubber products should not be stored under conditions of high or low
sociation Sheet Rubber Handbook, second edition.

KSRCA0415 Telephone KOA for widths and lengths not shown. 23

 Cautionary Statement CONTACT OUR SALES/WAREHOUSE
LOCATIONS BELOW WHICH SERVE
All Products sold and distributed by Kuriyama of America, Inc. are in the nature of commodities and they are sold by YOUR AREA
published specifications and not for particular purposes, uses or applications. Purchaser shall first determine their
suitability for the intended purposes, uses or applications and shall either conduct its own engineering studies or
SOUTHWEST WAREHOUSE
tests, or retain qualified engineers, consultants or testing laboratories and consult with them before determining the
KURIYAMA OF AMERICA, INC.
proper use, suitability or propriety of the merchandise or Products for the intended purposes, uses or applications. HOUSTON
Kuriyama of America, Inc. (“Seller") does not recommend the Products for any particular purpose, use or 531 PORTWALL STREET, SUITE 100
application, and the Purchaser or user thereof shall assume full responsibility for the suitability, propriety, use HOUSTON, TX 77029
Phone: (713) 674-8212
and application of the Products. Purchaser shall follow all instructions contained in Seller’s catalogs, brochures,
Toll Free Phone: (800) 501-6808
technical bulletins and other documents regarding the Products. The Products, including but not limited to, hose, FAX: (713) 674-5214
tubing or couplings, may fail due to the use or conveyance of substances at elevated or lowered temperatures Toll Free FAX: (800) 800-5214
or at excessive pressure, the conveyance of abrasive, injurious, flammable, explosive or damaging substances.
WESTERN WAREHOUSE
Hose or tubing used in bent configurations will be subjected to increased abrasion. Hose clamps or couplings
KURIYAMA OF AMERICA, INC.
may loosen after initial installation and all sections of hose and tubing including connections, couplings, clamps, SANTA FE SPRINGS
conductivity and bonding should be inspected frequently, regularly and consistently, and should be replaced, adjusted 10749 SHOEMAKER AVENUE
or re-tightened for the avoidance of leakage, for the prevention of injuries or damages, and for general safety SANTA FE SPRINGS, CA 90670-4039
purposes. Except as indicated in its Limited Warranty, Seller shall not be liable or responsible for direct or indirect Phone: (562) 941-4507
injuries or damages caused by or attributed to the failure or malfunction of any Products sold or distributed by it. FAX: (562) 941-8940
Toll-Free FAX: (800) 326-8940
Purchasers or users of the Products should frequently and consistently undertake inspections and protective
measures with respect to the use and application of Products, which should include the examination of tube and cover, SOUTHEAST WAREHOUSE
conditions of the hose or tubing, and the identification, repair or replacement of sections showing cracking, blistering, FORTNEY SALES CO., INC.
separations, internal and external abrasions, leaking or slipped couplings or connections and make proper proof tests. 4221 CANTRELL ROAD NW
ACWORTH, GA 30101

Limited Warranty
PHONE: (770) 427-6528
FAX: (770) 423-9249
Toll Free FAX: (800) 423-9249
Web Site: www.fortneysales.com
The Products sold or distributed by Seller are warranted to its customers to be free from defects in material E-Mail: [email protected]
and workmanship at the time of shipment by us, subject to the following provisions. ALL WARRANTY
CLAIMS SHALL BE MADE WITHIN SIX (6) MONTHS AFTER SELLER SHIPPED THE PRODUCTS. SELLER’S EASTERN WAREHOUSE
LIABILITY HEREUNDER IS LIMITED AT SELLER’S EXCLUSIVE DISCRETION, TO 1) THE PURCHASE PRICE OF EASTERN RUBBER & PLASTICS CO., INC.
ANY PRODUCTS PROVING DEFECTIVE; 2) REPAIR OF ANY DEFECTIVE PRODUCT OR PART THEREOF; OR 3) RT. 537 PLUMSTED INDUSTRIAL PARK
REPLACEMENT OF ANY DEFECTIVE PRODUCT OR PART UPON ITS AUTHORIZED RETURN TO SELLER. NEW EGYPT, NJ 08533-0248
Phone: (609) 758-0100
THIS WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, STATUTORY, FAX: (609) 758-0102
OR OTHERWISE CREATED UNDER APPLICABLE LAW INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF Toll Free FAX: (800) 445-7138
MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL Web Site: www.easternrubber.com
SELLER OR THE MANUFACTURER OF THE PRODUCT BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL E-Mail: [email protected]
DAMAGES, INCLUDING LOSS OF PROFITS, WHETHER OR NOT CAUSED BY OR RESULTING FROM THE
NEGLIGENCE OF SELLER AND/OR THE MANUFACTURER OF THE PRODUCT, UNLESS SPECIFICALLY PROVIDED
HEREIN. IN ADDITION, THIS WARRANTY SHALL NOT APPLY TO ANY PRODUCTS OR PORTIONS THEREOF WHICH IN CANADA:
HAVE BEEN SUBJECTED TO ABUSE, MISUSE, IMPROPER INSTALLATION, MAINTENANCE, OR OPERATION, KURI TEC CORPORATION
ELECTRICAL FAILURE OR ABNORMAL CONDITIONS, AND TO PRODUCTS WHICH HAVE BEEN TAMPERED BOX 21052, L P M P O
WITH, ALTERED, MODIFIED, REPAIRED, REWORKED BY ANYONE NOT APPROVED BY SELLER, OR USED IN ANY 140 ROY BOULEVARD
BRANTFORD, ONT, CANADA N3R 7W9
MANNER INCONSISTENT WITH THE PROVISIONS OF THE “CAUTIONARY STATEMENT" ABOVE OR ANY
Phone: (519) 753-6717
INSTRUCTIONS OR SPECIFICATIONS PROVIDED WITH OR FOR THE PRODUCT. 09/2005
FAX: (519) 753-7737
Web Site: http://www.kuritec.com
E-Mail: [email protected]

Distributed by:
IN MEXICO:
KURIYAMA DE MÉXICO S DE RL DE CV
CARRETERA MIGUEL ALEMÁN KM. 14.8
PARQUE INDUSTRIAL HASNA
APODACA (MONTERREY), N.L., 66600, MEXICO
Phone: (81) 1086-1870 O 71
Toll-Free: (within Mexico) 01-800-822-52-00
FAX: (81) 1086-1869
Internet: www.kuriyama.com
Correo Electronico: [email protected]

Headquarters, Sales Office and Warehouse Location

THE ASSOCIATION FOR HOSE AND
ACCESSORIES DISTRIBUTION

360 E. State Parkway, Schaumburg, IL 60173-5335

Phone: (847) 755-0360 • Toll-free FAX: (800) 800-0320
International FAX: (847) 885-0996
Web Site: www.kuriyama.com
E-Mail: [email protected]

The trademarks contained in this publication are trademarks of Kuriyama of America, Inc.

Telephone
24©2015 Kuriyama of America, Inc. All rights KOA
reserved. for widths and 8M
lengths not shown.
04/15 Printed in U. S. A.KSRCA0415 KSRCA0415