Scribd
Upload
290 views4 pages

En1092-Flange PN10 16

This document contains information about EN 1092-1 PN10 and PN16 flanges. It lists 14 different flange types, including slip-on, weld-neck, threaded, and blind flanges. It also contains notes that dimensions N1, N2, and N3 are measured at the intersection of the hub draft angle and flange back face, and that d1 dimensions can be found in another document on flange facing dimensions. Contact information is provided at the bottom.

Uploaded by

AhmedRamadan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
290 views4 pages

En1092-Flange PN10 16

This document contains information about EN 1092-1 PN10 and PN16 flanges. It lists 14 different flange types, including slip-on, weld-neck, threaded, and blind flanges. It also contains notes that dimensions N1, N2, and N3 are measured at the intersection of the hub draft angle and flange back face, and that d1 dimensions can be found in another document on flange facing dimensions. Contact information is provided at the bottom.

Uploaded by

AhmedRamadan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

EN 1092-1 PN10 Flanges

Flange type (typ) as in EN 1092-1

01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

05 (Blank [blind] flanges) 33 (Lapped pipe ends)

11 (Weld-neck flanges) 34 (Weld-neck collars)

12 (Hubbed slip-on flanges for welding)

Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: [email protected]


EN 1092-1 PN10 Flanges

Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange.
Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: [email protected]


EN 1092-1 PN16 Flanges

Flange type (typ) as in EN 1092-1

01 (Plate [slip-on] flanges for welding) 13 (Hubbed threaded flanges)

02 (Loose plate flanges with weld-on plate collar) 21 (Integral flanges)

04 (Loose plate flanges with weld-neck collar) 32 (Weld-on plate collars)

05 (Blank [blind] flanges) 33 (Lapped pipe ends)

11 (Weld-neck flanges) 34 (Weld-neck collars)

12 (Hubbed slip-on flanges for welding)

Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: [email protected]


EN 1092-1 PN16 Flanges

Note 1: Dimensions N1, N2 and N3 are measured at the intersection of the hub draft angle and the back face of the flange.
Note 2: For d1 dimensions see document "Flange Facing Dimensions EN 1092-1".

Tel: 886-4-23112576 Fax: 886-4-23112578 E-mail: [email protected]

You might also like