Wi-Fi AIS Devices: The Boating App Is Needed
Wi-Fi AIS Devices: The Boating App Is Needed
See nearby automatic identification system (AIS) targets overlaid on the Boating app maps in real time. Connect the app to one of the AIS sources suggested below (A, B or C). An active subscription in
the Boating app is needed.
Comar* comarsystems.com
If you have an AIS device not listed above, you can try connecting it to the Boating app manually. In the Boating app, go to Menu > Connect a Device > Add Device, and use your AIS device TCP or UDP configuration.
* We have not tested these devices and cannot guarantee flawless operation
Revised August 26, 2020
BOATING APP - AIS DEVICES COMPATIBILITY GUIDE
PAGE 2/2
Connect an AIS device (no Wi-Fi®) to an NMEA 0183 Wi-Fi® “bridge” device (C1, C2, C3) in order to wirelessly stream AIS data to the Navionics Boating app. In the app, go to Menu
AIS Devices > Connect a Device, and follow the instructions.
C
(no Wi-Fi®)
No internet connection is needed.
Trelleborg - Cat ROT - Cat 1* trelleborg.com Use NMEA 0183 Wi-Fi® routers to wirelessly connect the Navionics
Boating app to “C”.
Yacht Devices yachtd.com
AIS DEVICE
(NO Wi-Fi®)
Lowrance - HDS LIVE 7, 9, 12, 16; HDS Carbon 7, 9, 12, 16. HDS
C2 Wi-Fi® GPS Chartplotters Gen3 7, 9, 12; Elite Ti2 7, 9, 12; Elite Ti 5, 7, 9, 12.
lowrance.com
C C2
Simrad - NSS evo3 7, 9, 12, 16; GO XSR 7; GO XSE 5, 7, 9, 12; GO Use Wi-Fi® GPS chartplotters to wirelessly connect the Navionics
simrad-yachting.com
7, 9, 12. Boating app to “C”.
AIS DEVICE
(NO Wi-Fi®)
GPS Chartplotters (no Wi-
Lowrance - HDS Gen2 Touch 7, 7m, 9, 9m, 12, 12m; HDS Gen2 5,
C3 Fi®) + GoFree WIFI-1 Module 5m, 7, 7m, 8, 8m, 10, 10m.
lowrance.com
C C3
* We have not tested these devices and cannot guarantee flawless operation
If you have an AIS device not listed above, you can try connecting it to the Boating app manually. In the Boating app, go to Menu > Connect a Device > Add Device, and use your AIS device TCP or UDP configuration.