www.58display.

com
LP116WF1
Liquid Crystal Display
Product Specification

SPECIFICATION
FOR
APPROVAL

( ◆ ) Preliminary Specification
( ) Final Specification

Title 11.6” FHD TFT LCD

Customer SUPPLIER LG Display Co., Ltd.

MODEL *MODEL LP116WF1

Suffix SPA1-512
*When you obtain standard approval,
please use the above model name without suffix

APPROVED BY SIGNATURE APPROVED BY SIGNATURE

Mighty Paeng / S. Manager

/

REVIEWED BY
/
M. H. Kim / Manager

/ PREPARED BY

K. M. Lee / Engineer

Please return 1 copy for your confirmation with Products Engineering Dept.
your signature and comments. LG Display Co., Ltd

Ver. 0.8 Oct. 25. 2012 1 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

Contents
No ITEM Page
COVER 1
CONTENTS 2
RECORD OF REVISIONS 3
1 GENERAL DESCRIPTION 4-5
2 ABSOLUTE MAXIMUM RATINGS 6
3 ELECTRICAL SPECIFICATIONS

3-1 ELECTRICAL CHARACTREISTICS 7-8

3-2 INTERFACE CONNECTION 9
3-3 eDP SIGNAL TIMING SPECIFICATIONS 10
3-4 SIGNAL TIMING SPECIFICATIONS 11
3-5 SIGNAL TIMING WAVEFORMS 11
3-6 COLOR INPUT DATA REFERNECE 12
3-7 POWER SEQUENCE 13
4 TOUCH SPECIFICATIONS

4-1 GENERAL SPECIFICATIONS 14

4-2 TOUCH PERFORMANCE 14
4-3 TOUCH ELECTRICAL CHARACTERISTICS 14
4-4 TOUCH INSPECTION PROCESS 15
5 OPTICAL SFECIFICATIONS 16-18
6 MECHANICAL CHARACTERISTICS 19-20
7 RELIABLITY 21-22
8 INTERNATIONAL STANDARDS

8-1 SAFETY 22
8-2 EMC 22
8-3 ENVIRONMENT 22
9 PACKING

9-1 DESIGNATION OF LOT MARK 23

9-2 PACKING FORM 23-25
10 PRECAUTIONS 26-27
A APPENDIX. Enhanced Extended Display Identification Data 28-30

Ver. 0.8 Oct. 25. 2012 2 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

RECORD OF REVISIONS

EDID
Revision No Revision Date Page Description
Ver.
0.0 Mar. 15. 2012 - First Draft V0.0

Update Sensor Active area size, Weight spec, Surface

0.1 May. 31. 2012 5 V0.1
Treatment, Cover Glass type
7 Update Power Consumption
8 Change Initial  minimum
14 Update Cover Lens Type / Thickness
16 Update response time typ. spec
19 Update TSP Thickness spec
20 Update LCM+TSP Module drawing
23 Update Packing Form
24 Update Packing Assembly
25 Update Pallet Assembly

0.2 June. 13. 2012 5 Update Outline Dimension V0.2

19 Update Outline Dimension

0.3 July. 4. 2012 11 Update Timing Table V0.3
0.4 July. 14. 2012 11 Update color spec V0.4
0.5 Aug. 9. 2012 15 Add „Check with Optimus Test before packing‟ V0.5
Differential peak-to-peak Input voltage at Test Points
0.6 Aug. 10. 2012 10 V0.6
(Eye diagram height) : 120mV  70mV For high bit rate
28-30 Update APPENDIX. EEDID
0.7 Aug. 23. 2012 5 Update Glass Type V0.7
14 Update Power Consumption
15 Update Touch Inspection Process
19 Surface Treatment : AF Coating

Ver. 0.8 Oct. 25. 2012 3 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

1. General Description
The LP116WF1 is a Color Active Matrix Liquid Crystal Display with an integral LED backlight system and
Touch Screen Panel. The matrix employs a-Si Thin Film Transistor as the active element. It is a
transmissive type display operating in the normally black mode. This TFT-LCD has 11.6 inches diagonally
measured active display area with FHD resolution (1920 horizontal by 1080 vertical pixel array). Each pixel
is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray scale or
the brightness of the sub-pixel color is determined with a 6-bit gray scale signal for each dot, thus,
presenting a palette of more than 262,144 colors. The LP116WF1 has been designed to apply the interface
method that enables low power, high speed, low EMI. The LP116WF1 is intended to support applications
where thin thickness, low power are critical factors and graphic displays are important. In combination with
the vertical arrangement of the sub-pixels, the LP116WF1 characteristics provide an excellent flat display.

LP116WF1 is the „Total solution‟ model. It means it includes LCM & TSP
(TSP is assembled by „Direct Bonding‟ method)

1 1920

TFT-LCD Panel
User connector

eDP Timing Control (Full HD, COG, IPS)

2Lane Block

1080
DVCC CLKs

Power DVCC, AVDD Source Driver

35 VCC VGH, VGL, GMA
Block
(Bottom Bent)
Pin

VOUT_LED
LED Backlight Ass‟y
FB1~5

V_Touch
Touch Screen
USB Controller Block
Touch Signal Touch Screen Panel
Data

Control & Data Power

Ver. 0.8 Oct. 25. 2012 4 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

General Features

LCM
Active Screen Size 11.6 inches diagonal
Outline Dimension LCM 267.0±0.5 (H) × 157.8±0.5 (V) × 2.5 mm (max.)
Pixel Pitch 0.1335 mm × 0.1335 mm
Pixel Format 1920 horiz. by 1080 vert. Pixels RGB strip arrangement
Color Depth 6-bit, 1262,144 colors
Luminance, White 360cd/m2(Typ., @ILED=17mA)
Logic 0.95W (typ.@Mosaic)
Power Consumption
B/L 2.10W (typ.@ ILED= 17mA)
Weight LCM 185g (max.)
Display Operating Mode Transmissive mode, normally Black
Surface Treatment Glare treatment of the front polarizer

TSP
Active Screen Size 11.6 inches diagonal
Cover Glass Outline Dimension 305(H) × 181.4(V) × 0.7 (D) mm (typ.)
Sensor Film Outline Dimension 267(H) × 157.90(V) × 0.188 (D) mm (typ.)
Sensor Active area 259.2(H) × 147.18(V) mm
Cover View Area 257.72(H) × 145.58(V) mm
Sensor Chanel Pitch 4.11mm (H) x 4.06mm (V), Grid
Number of Sensor Chanel 36ea(H) x 64ea(V)
Power Consumption 0.43W (typ. @ VTSP=3.3V)
Weight 145g (max. w resin)
Display Operating Mode Transmissive mode, normally Black
Surface Treatment AF Coating(8H))
Type Projected Capacitive Add-on Touch Sensor Film, GF2
Substrate
Input Method Single & Multi Finger
Cover Glass Gorilla2 0.7T

Ver. 0.8 Oct. 25. 2012 5 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

2. Absolute Maximum Ratings

The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.

Table 1. ABSOLUTE MAXIMUM RATINGS

Values
Parameter Symbol Units Notes
Min Max
Power Input Voltage VCC -0.3 4.0 Vdc at 25  5C

Operating Temperature TOP 0 50 C 1

Storage Temperature HST -20 60 C 1

Operating Ambient Humidity HOP 10 90 %RH 1

Storage Humidity HST 10 90 %RH 1

Note : 1. Temperature and relative humidity range are shown in the figure below.
Wet bulb temperature should be 39C Max, and no condensation of water.

90% 80%

60 60%

Wet Bulb 50
Humidity[(%)RH]

Temperature [℃] Storage

40 40%

30 Operation
20
20%
10
0
10%

-20 0 10 20 30 40 50 60 70 80

Dry Bulb Temperature [℃]

Ver. 0.8 Oct. 25. 2012 6 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3. Electrical Specifications
3-1. Electrical Characteristics
The LP116WF1 requires two power inputs. The first logic is employed to power the LCD electronics and to
drive the TFT array and liquid crystal. The second backlight is the input about LED BL with LED Driver.
Table 2. ELECTRICAL CHARACTERISTICS
Values
Parameter Symbol Unit Notes
Min Typ Max
LOGIC :
Power Supply Input Voltage VCC 3.0 3.3 3.6 V 1
Power Supply Input Current ICC - 290 330 mA 2
Power Consumption PCC - 0.95 1.10 W 2
Power Supply Inrush Current ICC_P - - 1500 mA 3
LVDS Impedance ZLVDS 90 100 110 Ω 4
BACKLIGHT : ( without LED Driver)
LED Vf Vf 2.85 2.9 V
Operating Current per string ILED - 17 mA 5
LED Power Consumption PLED - 2.10 2.22 W 6
Life Time 15,000 - - Hrs 7
Touch Panel :
Power Supply Input Voltage VTSP 3.0 3.3 3.6 V
Power Supply Input Current ITSP 130 150 mA 8
Power Consumption PTSP 0.43 0.50 W 8

Ver. 0.8 Oct. 25. 2012 7 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

Note)
1. The measuring position is the connector of LCM and the test conditions are under 25℃, fv = 60Hz,
White pattern.
2. The specified Icc current and power consumption are under
the Vcc = 3.3V , 25℃, fv = 60Hz condition whereas Mosaic pattern
is displayed and fv is the frame frequency.

3. The below figures are the measuring Vcc condition and the Vcc control block LGD used.
The Vcc condition is same the minimum of T1 at Power on sequence.

3.3V
Rising time
Vcc 90%

0V 10%
0.5ms

4. This impedance value is needed to proper display and measured form LVDS Tx to the mating connector.
5. The typical operating current is for the typical surface luminance (LWH) in optical characteristics.
ILED is the current of each LEDs‟ string, LED backlight has strings on it.
6. The LED power consumption shown above does not include power of external LED driver circuit
for typical current condition.
7. The life time is determined as the time at which the typical brightness of LCD is 50% compare to that of
minimum value at the typical LED current. These LED backlight has 5 strings on it and the typical current
of LED‟s string is base on 17mA.
8. The specified ITSP current and power consumption (PTSP) are under
the VTSP = 5V , 25℃, 100Hz at 1-finger and Active mode.

Ver. 0.8 Oct. 25. 2012 8 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3-2. Interface Connection

This LCD employs two interface connections, a 35pin connector is used for the module electronics interface and
the other connector is used for the integral backlight system.
The electronics interface connector is a model FH35W-35S-0.3SHW manufactured by Hirose.
Table 3. MODULE CONNECTOR PIN CONFIGURATION (CN1)
Pin Symbol Description Notes
1 NC No Connection
2 [Connector]
FB5 LED Cathode
FH35W-35S-0.3SHW(Hirose), 35pin
3 FB4 LED Cathode
4 FB3 LED Cathode [Connector pin arrangement]
5 FB2 LED Cathode 1 35

6 FB1 LED Cathode

7 NC No Connection [Reserved]
8 NC No Connection [Reserved] 2 34
9 VLED Power Supply for LED [Anode] [LCD Module Rear View]
10 VLED Power Supply for LED [Anode]
11 NC No Connection
12 H_GND High Speed Main Link Ground
13 AUX- Complement Signal Auxiliary Ch.
14 AUX+ True Signal Auxiliary Ch.
15 H_GND High Speed Main Link Ground
16 ML0- Complement Signal Link Lane 0
17 ML0+ True Signal Link Lane 0
18 H_GND High Speed Main Link Ground
19 ML1- Complement Signal Link Lane 1
20 ML1+ True Signal Link Lane 1
21 H_GND High Speed Main Link Ground
22 VCC Power Supply, 3.3V Typ.
23 VCC Power Supply, 3.3V Typ.
24 VCC Power Supply, 3.3V Typ.
25 NC No Connection [Reserved]
26 HPD HPD Signal Pin
27 GND Ground
28 GND Ground
29 GND Ground
30 T_GND Touch Ground
31 D+ Positive USB Signal for Touch
32 D- Negative USB Signal for Touch
33 T_GND Touch Ground
34 VCC_3V Power Supply, 3V Typ.
35 VCC_3V Power Supply, 3V Typ.

Ver. 0.8 Oct. 25. 2012 9 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3-3. eDP Signal Timing Specifications

3-3-1. DC Specification
The VESA Display Port related AC specification is compliant with the VESA Display Port Standard v1.1a.

Description Symbol Min Max Unit Notes

70 - For high bit rate

Differential peak-to-peak Input voltage
VDIFF p-p mV
at Test Points (Eye diagram height) 40 - For reduced bit rate

Rx DC common mode voltage VCM 0 2.0 V -

3-3-2. AC Specification
The VESA Display Port related AC specification is compliant with the VESA Display Port Standard v1.1a.

Description Symbol Min Typ Max Unit Notes

Unit Interval for high bit rate

UI_High_Rate - 370 - ps Range is nominal ±350ppm.
(2.7Gbps/lane) DisplayPort Link Rx does not
require local crystal for link
Unit Interval for high bit rate clock generation
UI_Low_Rate - 617 - ps
(1.62Gbps/lane)

V Rx-SKEW-
Lane-to-Lane skew - - 5200 ps -
INTER_PAIR

V Rx-SKEW- - - 100 ps For high bit rate

Lane intra-pair skew
INTRA_PAIR - - 300 ps For reduced bit rate

Ver. 0.8 Oct. 25. 2012 10 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3-4. Signal Timing Specifications

This is the signal timing required at the input of the User connector. All of the interface signal timing should be
satisfied with the following specifications and specifications of eDP Tx/Rx for its proper operation.
Table 5. TIMING TABLE

ITEM Symbol Min Typ Max Unit Note

DCLK Frequency fCLK 132.8 140 145.1 MHz

Period Thp 2020 2100 2156

Hsync Width tWH - 32 - tCLK

Width-Active tWHA - 1920 -

Period tVP 1096 1111 1122

Vsync
Width tWV - 5 - tHP

Width-Active tWVA - 1080 -

Horizontal back porch tHBP 48 100 100

tCLK
Data Horizontal front porch tHFP 20 48 104
Enable Vertical back porch tVBP 10 23 28
tHP
Vertical front porch tVFP 1 3 9

3-5. Signal Timing Waveforms Condition : VCC =3.3V

High: 0.7VCC
Data Enable, Hsync, Vsync
Low: 0.3VCC

tCLK
DCLK 0.5 Vcc

tHP
Hsync tWH

tHBP tWHA tHFP

Data Enable
tVP
tWV
Vsync tVFP
tVBP tWVA

Data Enable

Ver. 0.8 Oct. 25. 2012 11 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3-6. Color Input Data Reference

The brightness of each primary color (red, green and blue) is based on the 6-bit gray scale data input for the
color ; the higher the binary input, the brighter the color. The table below provides a reference for color
versus data input.

Table 7. COLOR DATA REFERENCE

Input Color Data
RED GREEN BLUE
Color
MSB LSB MSB LSB MSB LSB
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0

Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0

Basic Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Color Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1

Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1

Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0

White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1

RED (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

RED (01) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0

RED … … … …

RED (62) 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0

RED (63) 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0

GREEN (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

GREEN (01) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0

GREEN ... … … …

GREEN (62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0

GREEN (63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0

BLUE (00) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0

BLUE (01) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1

BLUE … … … …

BLUE (62) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0

BLUE (63) 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1

Ver. 0.8 Oct. 25. 2012 12 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

3-7. Power Sequence

3.3V
90% 90%
Power Supply Input T1
VCC
10% 10%
0V
T2 T7 T6
HPD Out from LCM 0V
HPD
Vcm Valid Channel Operational Data
Aux Channel Data Input 0V
Link
AUX
T3 Training Idle

Valid
Vcm Data Valid Video Data
Main Link Data Input 0V
ML0 T4 T5

T8 T9
VLED BL ON
BL On/Off Control Signal 0V (Off)

Values
Parameter Units
Min Typ Max

T1 0.5 - 10 ms

T2 0 - 200 ms

T3 50 75 - ms

T4 0 - - ms

T5 0 - - ms

T6 500 - - ms

T7 3 - 10 ms

T8 200 - - ms

T9 200 - - ms

Note)
1. Do not insert the mating cable when system turn on.
2. Valid Data have to meet “3-3. eDP Signal Timing Specifications”
3. eDP need to pull-down condition on invalid status.
4. LGD recommend the rising sequence of VLED after the Vcc and valid status of eDP turn on.

Ver. 0.8 Oct. 25. 2012 13 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

4. Touch Specifications
4-1. General Specifications
The contents provide general characteristics for the model LP116WF1-SPA1.

Item Spec.

Multi touch points 10 points

Active touch area Same as LCD A/A

Outline 305 x 181.4 [mm]

Cover
Lens
Type / Thickness 0.7 [mm]

General Outline 267.0 x 157.9 [mm]

Sensor
Specification Film
Type / Thickness GF2 / 0.2 [mm]

Resolution Same as LCD

Interface USB

System OS Win7/8

Active Pen Support Yes

4-2. Touch Performance

The contents provide general performance characteristics for the model LP116WF1-SPA1.
- Meet Win8 Requirement

4-3. Touch Electrical Characteristics

The contents provide general Electrical characteristics for the model LP116WF1-SPA1.

Values
Parameter Symbol Units Notes
Min. Typ. Max.
Power Supply Input Voltage VTSP 3.0 3.3 3.6 V
Power Supply Input Current ITSP 130 150 mA
Power Consumption PTSP 0.43 0.50 W @ All Point Touch

Ver. 0.8 Oct. 25. 2012 14 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

4-4. Touch Inspection Process

The Touch Inspection will follow the process below.

Module Manufacture Process

Cell Clean

Attach Polarizer
IC (SMT) Test

1. F/W Writing
TSP Test COG 2. Reference/Drawing Test
(By N-trig Optimus S/W)
1. Reference/Drawing Test FOG
(By N-trig Optimus S/W) Warehousing
PCB Bonding

B/A Inspection
Warehousing

Direct Bonding

Inspection
Final Test
B/L Assembly
1. Reference/Drawing Test
Connect Touch FPC (By N-trig Optimus S/W)

Attach Tape

Final/Touch Inspection

Package / Shipment

Ver. 0.8 Oct. 25. 2012 15 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

5. Optical Specification
Optical characteristics are determined after the unit has been „ON‟ and stable for approximately 30 minutes in
a dark environment at 25C. The values specified are at an approximate distance 50cm from the LCD surface
at a viewing angle of  and  equal to 0.
FIG. 1 presents additional information concerning the measurement equipment and method.
FIG. 1 Optical Characteristic Measurement Equipment and Method

LCD Module Pritchard 880 or

Optical Stage(x,y)
equivalent

50cm
Table 8. OPTICAL CHARACTERISTICS
Ta=25C, VCC=3.3V, fV=60Hz, IBL= 17 mA
Values
Parameter Symbol Units Notes
Min Typ Max
Contrast Ratio CR 500 600 - 1
Surface Luminance
w/Touch LWH 300 360 - cd/m2 2
(White)
Luminance Variation  WHITE - 1.4 1.6 3
Response Time TrR+ TrD - 25 40 ms 4
Color Coordinates
RED RX 0.580 0.610 0.640
RY 0.320 0.350 0.380
GREEN GX 0.295 0.325 0.355
GY 0.530 0.560 0.590
BLUE BX 0.120 0.150 0.180
BY 0.100 0.130 0.160
WHITE WX 0.283 0.313 0.343
WY 0.299 0.329 0.359
Viewing Angle 5
x axis, right(=0) r 80 degree 3 o‟clock
x axis, left (=180) l 80 degree 9 o‟clock
y axis, up (=90) u 80 degree 12 o‟clock
y axis, down (=270) d 80 degree 6 o‟clock
Gray Scale 2.2 6

Ver. 0.8 Oct. 25. 2012 16 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

Note)
1. Contrast Ratio(CR) is defined mathematically as
Surface Luminance with all white pixels
Contrast Ratio =
Surface Luminance with all black pixels

2. Surface luminance is the average of 5 point across the LCD surface 50cm from the surface with
all pixels displaying white. For more information see FIG 1.

LWH = Average(L1,L2, … L5)

3. The variation in surface luminance , The panel total variation ( WHITE) is determined by measuring LN
at each test position 1 through 13 and then defined as followed numerical formula.
For more information see FIG 2.

Maximum(L1,L2, … L13)
 WHITE =
Minimum(L1,L2, … L13)

4. Response time is the time required for the display to transition from white to black (rise time, Tr R) and
from black to white(Decay Time, TrD). For additional information see FIG 3.

5. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined
for the horizontal or x axis and the vertical or y axis with respect to the z axis which is normal to the
LCD surface. For more information see FIG 4.

6. Gray scale specification * fV = 60Hz

Gray Level Luminance [%] (Typ)

L0 0.1
L15 0.18
L31 0.68
L47 1.98
L63 4.36
L79 8.1
L95 12.93
L111 18.74
L127 25.3
L143 32.7
L159 40.67
L175 49.03
L191 58.08
L207 67.3
L223 77.7
L239 89.63
L255 100

Ver. 0.8 Oct. 25. 2012 17 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification
FIG. 2 Luminance
<measuring point for surface luminance & measuring point for luminance variation>
H

10mm A

6 7 8 10mm
2 3
B H,V : ACTIVE AREA
V A : H/4 mm
9 1 10
B : V/4 mm
POINTS: 13 POINTS
4 5 13
11 12

Active Area
FIG. 3 Response Time
The response time is defined as the following figure and shall be measured by switching the input signal
for “black” and “white”.
TrR TrD
%
100
90

Optical
Response
10
0 white white
black

FIG. 4 Viewing angle

Normal
Eye Y
 = 90 , Up

 = 180 ,
Left 

 = 0 ,
Right

 = 270 ,
Down

Ver. 0.8 Oct. 25. 2012 18 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

6. Mechanical Characteristics
The contents provide general mechanical characteristics for the model LP116WF1. In addition the figures
in the next page are detailed mechanical drawing of the LCD.

Horizontal 267.0  0.5mm

Outline Dimension Vertical 157.8 0.5mm

Thickness 2.5mm (max), 4.5mm(w. PCB)

Horizontal 256.320  0.3mm

Active Display Area
Vertical 144.180  0.3mm

Horizontal 305.0  0.1mm

Touch Screen Panel Vertical 181.40  0.1mm

Thickness 1.53mm (max. w Resin)

Horizontal 257.72  0.15mm

Bezel Area
Vertical 145.58  0.15mm

Weight 330g(Max) w/Touch, 185g(Max.) w/o Touch

LCD : Glare treatment of the front polarizer

Surface Treatment
TSP : AF Coating

Viewing Angle Viewing Angle (When Active area can be seen) ≤ 30°

Ver. 0.8 Oct. 25. 2012 19 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

<FRONT VIEW_LCM+TSP Module> Note) Unit:[mm], General tolerance:  0.5mm

<REAR VIEW_LCM+TSP Module>

Ver. 0.8 Oct. 25. 2012 20 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

7. Reliability

Environment test condition

No. Test Item Conditions

1 High temperature storage test Ta= 60C, 240h
2 Low temperature storage test Ta= -20C, 240h
3 High temperature operation test Ta= 50C, 50%RH, 240h
4 Low temperature operation test Ta= 0C, 240h
5 Vibration test (non-operating) Random, 1.0Grms, X,Y,Z Direction
Test time : each direction 1hour
6 Shock test (non-operating) Half sine wave, 180G, 2ms
one shock of each six faces
7 Altitude operating 0 ~ 10,000 feet (3,048m) 24Hr
storage / shipment 0 ~ 40,000 feet (12,192m) 24Hr

{ Result Evaluation Criteria }

There should be no change which might affect the practical display function when the display quality
test is conducted under normal operating condition.

Ver. 0.8 Oct. 25. 2012 21 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

8. International Standards
8-1. Safety
a) UL 60950-1, Underwriters Laboratories Inc.
Information Technology Equipment - Safety - Part 1 : General Requirements.
b) CAN/CSA C22.2 No.60950-1-07, Canadian Standards Association.
Information Technology Equipment - Safety - Part 1 : General Requirements.
c) EN 60950-1, European Committee for Electrotechnical Standardization (CENELEC).
Information Technology Equipment - Safety - Part 1 : General Requirements.
d) IEC 60950-1, The International Electrotechnical Commission (IEC).
Information Technology Equipment - Safety - Part 1 : General Requirements.

8-2. EMC

a) ANSI C63.4 “American National Standard for Methods of Measurement of Radio-Noise

Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 kHz to 40 GHz.”
American National Standards Institute (ANSI), 2003.
b) CISPR 22 “Information technology equipment – Radio disturbance characteristics – Limit and
methods of measurement." International Special Committee on Radio Interference
(CISPR), 2005.
c) CISPR 13 “Sound and television broadcast receivers and associated equipment – Radio disturbance
characteristics – Limits and method of measurement." International Special Committee on Radio
Interference (CISPR), 2006.

8-3. Environment
a) RoHS, Directive 2002/95/EC of the European Parliament and of the council of 27 January 2003

Ver. 0.8 Oct. 25. 2012 22 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

9. Packing

9-1. Designation of Lot Mark

a) Lot Mark

A B C D E F G H I J K L M

A,B,C : SIZE(INCH) D : YEAR

E : MONTH F ~ M : SERIAL NO.

Note
1. YEAR
Year 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020

Mark A B C D E F G H J K

2. MONTH

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Mark 1 2 3 4 5 6 7 8 9 A B C

b) Location of Lot Mark

Serial No. is printed on the label. The label is attached to the backside of the LCD module.
This is subject to change without prior notice.

9-2. Packing Form

a) Package quantity in one box : 20 pcs

b) Box Size : 478*365*244

Ver. 0.8 Oct. 25. 2012 23 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

# APPENDIX-2

■ Packing Assembly

1 LCM / 1 Bag

③ ①
1 LCM / 1 Slot
②

20LCM/Box = 20 Slot
⑤

NO. DESCRIPTION MATERIAL

1 LCD Module

2 BAG AL

3 TAPE MASKING 20MMX50M

4 PACKING, TOP EPS

5 PACKING, BOTTOM EPS

6 BOX SWR4

7 TAPE OPP 70MMX300M

8 LABEL ART 100X70

Ver. 0.8 Oct. 25. 2012 24 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

# APPENDIX-3

■ Pallet Assembly

③
⑤
④

① ⑦

NO. DESCRIPTION MATERIAL

1 Packing AssY

2 Pallet Plywood

3 Angle Cover SWR4

4 Label ART 100X70

5 Band PP

6 Wrap LLDPE

7 CLIP Steel

Ver. 0.8 Oct. 25. 2012 25 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

10. PRECAUTIONS

Please pay attention to the followings when you use this TFT LCD module.

10-1. MOUNTING PRECAUTIONS

(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to
t h e
module. And the case on which a module is mounted should have sufficient strength so that external
force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break
by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental
to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives
used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause
chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.

10-2. OPERATING PRECAUTIONS

(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage :
V=± 200mV(Over and under shoot voltage)

(2) Response time depends on the temperature.(In lower temperature, it becomes longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)
And in lower temperature, response time(required time that brightness is stable after turned on) becomes
longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or
electrical contacted parts. And after fading condensation, smear or spot will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be
done by system manufacturers. Grounding and shielding methods may be important to minimized the
interference.

Ver. 0.8 Oct. 25. 2012 26 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

10-3. ELECTROSTATIC DISCHARGE CONTROL

Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don‟t touch interface pin directly.

10-4. PRECAUTIONS FOR STRONG LIGHT EXPOSURE

Strong light exposure causes degradation of polarizer and color filter.

10-5. STORAGE
When storing modules as spares for a long time, the following precautions are necessary.

(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
temperature between 5C and 35C at normal humidity.
(2) The polarizer surface should not come in contact with any other object.
It is recommended that they be stored in the container in which they were shipped.

10-6. HANDLING PRECAUTIONS FOR PROTECTION FILM

(1) When the protection film is peeled off, static electricity is generated between the film and polarizer.
This should be peeled off slowly and carefully by people who are electrically grounded and with well
ion-blown equipment or in such a condition, etc.
(2) The protection film is attached to the polarizer with a small amount of glue. If some stress is applied
to rub the protection film against the polarizer during the time you peel off the film, the glue is apt to
remain on the polarizer.
Please carefully peel off the protection film without rubbing it against the polarizer.
(3) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of glue still on the polarizer after the protection film is peeled off.
(4) You can remove the glue easily. When the glue remains on the polarizer surface or its vestige is
recognized, please wipe them off with absorbent cotton waste or other soft material like chamois
soaked with normal-hexane.

Ver. 0.8 Oct. 25. 2012 27 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

APPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 1/3

Ver. 0.8 Oct. 25. 2012 28 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

APPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 2/3

Ver. 0.8 Oct. 25. 2012 29 / 30

 www.58display.com
LP116WF1
Liquid Crystal Display
Product Specification

APPENDIX A. Enhanced Extended Display Identification Data (EEDIDTM) 3/3

Ver. 0.8 Oct. 25. 2012 30 / 30