Scribd
Upload
292 views

Report Processing Data GLS270

This document is a report submitted by Muhammad Putra Danial Bin Shahrunaz Norhazli for the Geodetic Studies course GLS270 at Universiti Teknologi MARA Perlis. It outlines the 13 step process for importing GPS data files, setting coordinate systems and adjusting the network to generate an adjustment report. The key steps include setting the coordinate system to Malaysia RSO Geocentric, importing data files while checking for accuracy, adding base station coordinates, selecting all traverse stations, adjusting the 2D and H coordinates, and generating the network adjustment report.

Uploaded by

Hawani Sobry
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
292 views

Report Processing Data GLS270

This document is a report submitted by Muhammad Putra Danial Bin Shahrunaz Norhazli for the Geodetic Studies course GLS270 at Universiti Teknologi MARA Perlis. It outlines the 13 step process for importing GPS data files, setting coordinate systems and adjusting the network to generate an adjustment report. The key steps include setting the coordinate system to Malaysia RSO Geocentric, importing data files while checking for accuracy, adding base station coordinates, selecting all traverse stations, adjusting the 2D and H coordinates, and generating the network adjustment report.

Uploaded by

Hawani Sobry
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 15

UNIVERSITI TEKNOLOGI MARA

PERLIS

Faculty Architecture, Planning and Surveying


Department of Surveying Science and Geomatics
Diploma in Geomatics Science – AP120

REPORT
GEODETIC STUDIES
GLS 270
NAME : MUHAMMAD PUTRA DANIAL BIN SHAHRULNAZ NORHAZLI

NO MATRIC : 2019287366

GROUP : RAP1204B

TITLE : REPORT PROCESSING DATA

LECTURE NAME : DR. MUHAMMAD FAIZ BIN PA’SUYA


PROCEDURE

1. The first thing need to do is set the coordinates system by clicking the
project setting icon.
2. Click on the coordinates system and then do not to forget to click change.
3. Next, we need to find Malaysia RSO Geocentric and double click on it.
4. Do not forget to click no geoid model and click finish.
5. For import data, we need to clicking the import file at the corner of the
tool bar. Then, for next step click the three dotted line to find the folder
that we want.
6. We need the be alert and recheck the date, type of receiver,
manufacture and method to be correct by referring the log sheet. Then,
do the same step by importing the other station file.
7. After import all the data file it will appear like this.

8. Then, right click on the base station and choose the add coordinate.
9. Then, set the coordinate by change the coordinate type to local and key
in the latitude, longitude and height by referring the base coordinate
given. Next, set the control quality by clicking the box icon below.
10. Select all the traverse.
11. After that, click the 2D and H box, but not to forget to click adjust.
12.The last but not least, we need to show the data report by clicking the
report and select the network adjustment report. The result will been
shown after that.

13. The result

You might also like