Iso 3549
Iso 3549
European Standard EN ISO 3549 : 2002 has the status of a DIN Standard.
National foreword
This standard has been published in accordance with a decision taken by CEN/TC 298 ‘Pigments and
extenders’ (Secretariat: Germany) to adopt, without alteration, International Standard ISO 3549 as a Euro-
pean Standard.
The responsible German body involved in its preparation was the Normenausschuss Pigmente und Füllstoffe
(Pigments and Extenders Standards Committee), Technical Committee Prüfverfahren und Kennwerte für
Pigmente.
The DIN Standards corresponding to the International Standards referred to in clause 2 of the EN are as
follows:
ISO Standard DIN Standard
ISO 594-1 DIN EN 20594-1
ISO 842 DIN EN ISO 15528
ISO 3696 DIN ISO 3696
Amendments
DIN 55969, September 1977 edition, has been superseded by the specifications of EN ISO 3549 which is
identical to ISO 3549.
Previous edition
DIN 55969: 1977-09.
National Annex NA
Standards referred to
(and not included in Normative references and Annex ZA)
DIN EN 20594-1 Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical
equipment – General requirements (ISO 594-1 : 1993)
DIN EN ISO 15528 Paints, varnishes and raw materials for paints and varnishes – Sampling
(ISO 15528 : 2000)
Continued overleaf.
EN comprises 15 pages.
© No part of this standard may be reproduced without the prior permission of Ref. No. DIN EN ISO 3549 : 2002-12
DIN Deutsches Institut für Normung e. V., Berlin. Beuth Verlag GmbH, 10772 Berlin, Germany, English price group 12 Sales No. 1112
has the exclusive right of sale for German Standards (DIN-Normen).
04.03
EN ISO 3549
September 2002
ICS 87.060.10
English version
ÈÉË
European Committee for Standardization
Comité Européen de Normalisation
Europäisches Komitee für Normung
© 2002. CEN – All rights of exploitation in any form and by any means Ref. No. EN ISO 3549 : 2002 E
reserved worldwide for CEN national members.
Page 2
EN ISO 3549 : 2002
Foreword
International Standard
ISO 3549 : 1995 Zinc dust pigments for paints – Specifications and test methods,
which was prepared by ISO/TC 35 ‘Paints and varnishes’ of the International Organization for Standardization,
has been adopted by Technical Committee CEN/TC 298 ‘Pigments and extenders’, the Secretariat of which is
held by DIN, as a European Standard.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, and conflicting national standards withdrawn, by March 2003, at the latest.
In accordance with the CEN/CENELEC Internal Regulations, the national standards organizations of the follow-
ing countries are bound to implement this European Standard:
Austria, Belgium, the Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, the Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, and the United Kingdom.
Endorsement notice
The text of the International Standard ISO 3549 : 1995 was approved by CEN as a European Standard without
any modification.
NOTE: Normative references to international publications are listed in Annex ZA (normative.)
Page 3
EN ISO 3549 : 2002
Page 4
EN ISO 3549 : 2002
Page 5
EN ISO 3549 : 2002
Page 6
EN ISO 3549 : 2002
Page 7
EN ISO 3549 : 2002
Page 8
EN ISO 3549 : 2002
Page 9
EN ISO 3549 : 2002
Page 10
EN ISO 3549 : 2002
Page 11
EN ISO 3549 : 2002
Page 12
EN ISO 3549 : 2002
Page 13
EN ISO 3549 : 2002
Page 14
EN ISO 3549 : 2002
Page 15
EN ISO 3549 : 2002