Scribd
Upload
71 views

DDPJ 3322 PBL Assignments 2015/2016 Sem 1 Pneumatics and Hydraulics

This document outlines the assignments for a course on pneumatics and hydraulics. It includes 5 parts: definitions and symbols, drawing a basic hydraulic system, drawing scaled diagrams for a pneumatic project using a master and slave cylinders, and constructing a simulation of the project. Students will be assessed on their ability to define and diagram key pneumatic and hydraulic components, explain hydraulic mechanical advantage, and design and simulate an original pneumatic system. The goal is for students to learn fundamentals of pneumatic and hydraulic systems and apply them to a construction project.

Uploaded by

BANBROS ENGINEERING PVT. LTD.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
71 views

DDPJ 3322 PBL Assignments 2015/2016 Sem 1 Pneumatics and Hydraulics

This document outlines the assignments for a course on pneumatics and hydraulics. It includes 5 parts: definitions and symbols, drawing a basic hydraulic system, drawing scaled diagrams for a pneumatic project using a master and slave cylinders, and constructing a simulation of the project. Students will be assessed on their ability to define and diagram key pneumatic and hydraulic components, explain hydraulic mechanical advantage, and design and simulate an original pneumatic system. The goal is for students to learn fundamentals of pneumatic and hydraulic systems and apply them to a construction project.

Uploaded by

BANBROS ENGINEERING PVT. LTD.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

DDPJ 3322 PBL ASSIGNMENTS

2015/2016 Sem 1
Pneumatics and Hydraulics

Purpose: To introduce the students to the basics of Pneumatic and Hydraulic


Systems, and to apply the basic principles of these systems into a
construction project.

Objectives:
A. To learn the terminology and symbols related to Pneumatics and
Hydraulics.
B. To understand how hydraulic lifts work by achieving mechanical advantage.
C. To design a hydraulic / pneumatic system project using a single master
cylinder controlling at least two slave cylinders.
D. To build a SIMULATION system that works hydraulic / pneumatic to
solve a problem.

Portfolio Requirements:
1. A complete list of definitions relating to pneumatics and hydraulics.
2. A list of the symbols involved in simple hydraulics and pneumatics accompanied
by drawings of each of the symbols on the list.
3. A drawing of the simple hydraulic system and a brief explanation in your own
words about how it works.
4. Drawings of your own created pneumatic system including at least one master
cylinder and two slave cylinders. Examples: elevator, sliding doors, dumb waiter.
5. A constructed project based on the designed system in number 6.

Assignment Outcomes:
Item Marks
Part A Hydraulics and Pneumatics Definitions 10
Part B Symbols 10
Part C Drawing of Basic Hydraulic Systems 15
Part D Draw Scaled diagrams of Pneumatic/Hydraulic Project 30
Part E Produce a Project Simulation 35
Part A: Definitions: (10 marks)
All definitions can be found on “Fluid Power” book.

1. Pneumatics
2. Hydraulics
3. Compressor
4. Receiver(tank)
5. Spool
6. Sensor
7. Pressure
8. Ports
9. Regulator
10. Time delay

Part B: Symbols: (10 marks)


1. Pressure Relief Valve
2. Shut off Valve
3. Pressure Regulator
4. Three Port Valve (air)
5. Single Acting Cylinder
6. Blocked Port
7. Air Flow
8. Exhaust
9. Air Supply
10. Hydraulic Pump (Fixed Displacement)

Part C: Basic Hydraulic Systems (15 marks)


A. Draw the simple hydraulic system. (Resources from
Fluid power by Esposito) (10 marks)

B. Explain in simple terms the mechanical advantage of a


hydraulic system. What is the trade off in this
system (you are not getting something for nothing…
Why?) (5 marks)

Part D: Scaled Diagrams of Project (30 marks)


 Draw scaled diagrams (TOP, FRONT, & SIDE VIEWS) of a pneumatic
system using a single master cylinder controlling two or more slave
cylinders.

 Create a materials list including the amount of wood you need to construct
your project.

 Some examples of projects are:


 Fabricated of pneumatic mobile
crane
 Fabrication of mini hydraulic hand
operated crane
 Sliding door(s)
 Dump truck
 Automatic pneumatic bottle washing
machine
 Coconut or durian peeler
 Coconut milk press machine
 Pneumatic can crushing machine
 Hydraulic bending portable machine
(tube steel)
 Pneumatic multipurpose grinding
machine
 Fabrication motorized hydraulic jack
 Mini-Baja’s hydraulic
 EACH student is required to have his/her own drawings.

Part E: Construct your Project Simulation (35 marks)


 After your diagrams have been approved by your lecturer you may
begin the construction of your simulation.

 Remember to keep strength and operation in mind.


 You need only build one project between the 5 group members.

You might also like