GE Healthcare

Aestiva/5
anesthesia
machine Aestiva®/5
Two vaporizer configuration
More than superior ventilation

Features
Superior ventilation: 7900 SmartVent™
• Volume Mode, pressure
• Volume Mode, Pressure Control Mode, Pressure Support
(PSVPro®), Synchronized Intermittent Mandatory
Ventilation (SIMV), electronic PEEP
• Tidal volume compensation
• One motion from mechanical to manual mode
• Two key presses to total standby: end case
• Cardiac bypass case mode
Aestiva/5
Open systems architecture Three vaporizer configuration

• Lower overall height

• User configurable drawers/shelving

Innovative patient breathing system Improved low flow/reduced life cycle costs
• Eight machine hoses/cables integrated • Fresh gas flow compensation—automatically
• “No tools” disassembly of components • Smooth, faster acting fresh gas flow control
• Autoclavable and latex-free • Minimum O2 flow of 50 mL
• Responsive location of common gas outlet • Dual air flow tube for low flow
• Two scheduled maintenance checks per year
Physical Specifications
Dimensions Top drawer (1 standard)—locking (internal dimensions)

2 vaporizer 3 vaporizer Height: 10.5 cm/4.1 in

configuration configuration Width: 38.5 cm/15.2 in
Height: 135.8 cm/53.4 in 135.8 cm/53.4 in Depth: 26 cm/10.2 in
Width: 75 cm/29.5 in 93 cm/36.6 in Lower drawers (optional)*
Depth: 83 cm/32.7 in 83 cm/32.7 in
Height: 14.5 cm/5.7 in
Weight: Approximately Approximately
Width: 38.5 cm/15.2 in
136 kg/300 lb 154 kg/340 lb
Depth: 26 cm/10.2 in
Top shelves (optional)
Lower shelves (optional)*
2 vaporizer 3 vaporizer
configuration configuration Heights: 9.2 cm/3.7 in 13.2 cm/5.2 in
Weight limit: 46 kg/100 lb 46 kg/100 lb 20.6 cm/8.2 in 24.6 cm/ 9.8 in
Width: 47.5, 67.5 or 87.5 cm/ 87.5 or 67.5 cm/ 28.6 cm/11.4 in 36 cm/14.4 in
18.7, 26.6 or 34.4 in 34.4 or 26.6 in
Width: 42.5 cm/16.75 in 42.5 cm/16.75 in
Depth: 41 cm/16.1 in 41 cm/16.1 in
Depth: 36 cm/14 in 36 cm/14 in
Work surface
Height: 87.6 cm/34.5 in
Width: 47 cm/18.5 in
Depth: 31.5 cm/12.4 in

Folding side shelf (optional)

Height: 87.5 cm/34.5 in
Width: 26.5 cm/10.4 in
Depth: 31.5 cm/12.4 in
Weight limit: 11.3 kg/25 lb

DIN rail (optional)

Side of
tabletop: 30 cm/12 in
Side of
machine: 23.5 cm/9.25 in

Space for additional

shelves and drawers
* Lower cabinet can be configured with a variety of
shelf and drawer combinations
Absorber arms Ventilator (VT) parameter ranges
Adjustable Non-adjustable Tidal volume range: 20 to 1500 mL (Volume
Control and SIMV modes)
Arm length: 30.5 cm/12 in 25.4 cm/10 in
5 to 1500 mL (Pressure
Bag arm Control Mode)
height: 87 cm/34.3 in 91.5 cm/36 in
104 cm/40.9 in Incremental settings: 20 to 100 mL
(increments of 5 mL)
Absorber
rotation: 85° 85° 100 to 300 mL
(increments of 10 mL)
Ventilator screen
300 to 1000 mL
Height: 7.6 cm/3 in (increments of 25 mL)

Width: 15.2 cm/6 in 1000 to 1500 mL

(increments of 50 mL)
Casters Minute volume range: 0 to 99.9 L/min
Diameter: 12.5 cm/5 in Pressure (PInspired) range: 5 to 60 cm H2O
Brakes: Single foot lever locks and (increments of 1 cm H2O)
unlocks two front casters Pressure (Plimit) range: 12 to 100 cm H2O
(increments of 1 cm H2O)
Ventilator operating specifications
Pressure (Psupport) range: Off, 2 to 40 cm H2O
(increments of 1 cm H2O)
Rate: 4 to 100 breaths per
minute for Volume Control
and Pressure Control;
2 to 60 breaths per minute
for SIMV, PSVPro and
SIMV–PC+PSV (increments
of 1 breath per minute)
Inspiratory/expiratory ratio: 2:1 to 1:8 (increments of 0.5)
Inspiratory time: 0.2 to 5.0 seconds
(increments of 0.1 seconds)
(SIMV and PSV Pro)
Trigger window: 0 to 80% (increments of 5%)
Flow trigger: 0.2 to 1.0 L/min
(increments of 0.2 L/min)
Ventilation operating modes
1 to 10 L/min (increments
Volume Control of 0.5 L/min)
Pressure Control Inspiration termination level: 5 to 75% (increments of 5%)
Synchronized Intermittent Mandatory Ventilation (SIMV) Backup mode delay: 10 to 30 seconds
Pressure Support (PSVPro) with Apnea Backup ventilation — (increments of 5 seconds)
(optional)
Positive End Expiratory Pressure (PEEP) Alarm settings
Type: Integrated, electronically Tidal volume (VTE): Low: OFF, 0 to 1500 mL
controlled High: 20 to 1600 mL, OFF
Range: OFF, 4 to 30 cm H2O Minute volume (VE): Low: OFF, 0 to 10 L/min
(increments of 1 cm H2O) High: 0 to 30 L/min, OFF

Ventilator performance Inspired oxygen (FiO2): Low: 18 to 100%

High: 18 to 100%, OFF
Pressure range at inlet: 240 kPa to 700 kPa/
Apnea alarm: Mechanical ventilation ON:
35 psig to 100 psig
< 5 mL breath measured in
Peak gas flow: 120 L/min + fresh gas flow 30 seconds
Flow valve range: 1 to 120 L/min Mechanical ventilation OFF:
< 5 mL breath measured in
Flow compensation range: 200 mL/min to 15 L/min
30 seconds
Ventilator monitoring Low airway pressure: 4 cm H2O above PEEP
Expiratory minute 0 to 99.9 L/min High pressure: 12 to 100 cm H2O
volume range: (increments of 1 cm H2O)
Expiratory tidal volume 0 to ≥ 1500 mL
Sustained airway pressure: Mechanical ventilation ON:
range:
Plimit < 30 cm H2O, the
O2 %: ≤ 5 to 110% sustained limit is 6 cm H2O
Peak pressure: –20 to 120 cm H2O
Plimit 30 to 60 cm H2O, the
Mean pressure: –20 to 120 cm H2O sustained limit is 20% of Plimit
Plateau pressure: 0 to 120 cm H2O
Plimit > 60 cm H2O, the
Pressure waveform 4 to 25 breaths per minute sustained limit is 12 cm H2O
sweep speed: (0 to 15 seconds)
PEEP and mechanical
26 to 75 breaths per minute
ventilation ON:
(0 to 5 seconds)
Sustained limit increases by
75 breaths per minute PEEP minus 2 cm H2O
(0 to 3 seconds)
Mechanical ventilation OFF:
Ventilator accuracy Plimit ≤ 60 cm H2O, the
sustained limit is 50% of Plimit
Delivery/monitoring accuracy Plimit > 60 cm H2O, the
Volume delivery: > 210 mL = better than 7% sustained limit is 30 cm H2O
< 210 mL = better than 15 mL Subatmospheric pressure: Paw < -10 cm H2O
< 60 mL = better than 10 mL
Alarm silence
Pressure delivery: ±10% or ±3 cm H2O countdown timer: 120 to 0 seconds
PEEP delivery: ±1.5 cm H2O
Volume monitoring: > 210 mL = better than 9%
< 210 mL = better than 18 mL
< 60 mL = better than 10 mL
Pressure monitoring: ±5% or ±2 cm H2O
Ventilator components Electrical specifications
Flow transducer Current leakage
Type: Variable orifice flow sensor 120 V: < 300µA
Dimensions: 22 mm OD and 15 mm ID Light package
Location: Inspiratory outlet and
Task light: 12 V, 3 lamps, type 194, .270A each
expiratory inlet
Goose neck
Optional autoclavable sensor available
(optional): 12 V, type 1815, .200A
Oxygen sensor
Power and battery backup
Type: Galvanic fuel cell
Power input: 120 Vac, 60 Hz, 10A
Life cycle: Approximately 18 months
Backup power: Demonstrated battery backup time
(dependent on usage)
under typical operating conditions is
Anesthetic agent delivery 45 minutes when fully charged
Battery type: Internal rechargeable sealed
Vaporizers: Tec 4, Tec 5, Tec 6 Plus, Tec 7
lead acid
Number of positions:2 or 3
Power cord: Length: 5 m/16.4 ft
Mounting: Tool-free installation Selectatec® Rating: 15A @ 120 Vac
manifold interlocks and isolates
vaporizers Communication port
Serial interface: Isolated RS-232C compatible port

Inlet/outlet modules (120 V)

System circuit
breakers: No outlets 5A w/outlets 10A
Outlets (optional): 4 outlets on back, 3-2A,
1-3A individual breakers
and 1-5A combined outlet
breaker, optional isolation
transformer
Auxiliary outlet
Tec 7
box (optional): 5 NEMA outlets on
dovetail-mounted box,
5-2A breakers, isolation
transformer
Tec 6 Plus outlet: 1 IEC 320 located above
vaporizer backbar

Tec 6 Plus
Pneumatic specifications Flowmeters
Internal common gas outlet O2 ranges: Two tubes: 0.05 to 0.95
L/min and 1 to 15 L/min
Connector: ISO 22 mm OD and 15 mm ID
Minimum O2 flow:
Auxiliary common gas outlet (optional) 50 mL/min ±25 mL
N2O ranges: Two tubes: 0 to 0.95
Connector: ISO 22 mm OD and 15 mm ID
L/min and 1 to 10 L/min
Gas supply Air range: One tube option:
1 to 15 L/min
Pipeline
input range: 240 kPa to 600 kPa/ Two tube option: 0 to
35 psig to 88 psig 0.95 and 1 to 15 L/min
Pipeline (low flow tube optional)
connections: DISS-male
CO2 (optional): One tube: 0 to 0.5 L/min
All fittings available for O2, N2O,
Heliox range
and Air, and contain pipeline filter
(optional): One tube: 0 to 15 L/min
and check valve.
Calibration: Percent of Accuracy
Cylinder input: Pin indexed in accordance with
full scale flow (% of flowrate)
CGA-V-1; contains input filter and
check valve 100 ±2.5%
90 ±2.5%
Note: Maximum 5 cylinders total; one
oxygen required. 80 ±2.6%

Primary regulator 70 ±2.7%

diaphragm minimum 60 ±2.9%
burst pressure: 2758 kPa/400 psig 50 ±3.1%
Primary regulator 40 ±3.4%
nominal output: < 338 kPa/49 psig
30 ±4.0%
Pin indexed cylinder connections
20 ±5.0%
Gas power outlet (optional) 10 ±8.1%
Connector: DISS indexed in accordance Calibration
with CGA-V-5 conditions:* 20°C/68°F
101.3 kPa/760 mmHg
Gas: Oxygen
* Different breathing circuit pressures, barometric
Pressure and flow pressures or temperatures change flowtube accuracy.
characteristics: Varies with source
Hypoxic guard system
O2 controls
Type: Mechanical Link-25™
Method: Proportionate decrease of N2O, CO2,
Range: Provides a nominal 25%
O2/He with reduction in O2 pressure
concentration of oxygen in any
Supply failure O2/N2O mixture
alarm: Range: 193 kPa to 221 kPa/
28 psig to 32 psig Materials
Sounds at maximum All materials in contact with patient gas are free of natural
volume every 10 seconds rubber latex.
O2 flush: Range: 35 to 50 L/min
Environmental specifications
System operation
Temperature: 10° to 40°C/50° to 104°F
Humidity: 15 to 95% relative humidity
(non-condensing)
Altitude: –440 to 3565 m/500 to 800 mmHg
System storage
Temperature: –25° to 65°C/–13° to 149°F
Humidity: 10 to 100% relative humidity
(including condensing)
Altitude: –440 to 5860 m/375 to 800 mmHg
Oxygen cell
storage: –15° to 50°C/5° to 122°F
10 to 95% relative humidity
500 to 800 mmHg

Electromagnetic compatibility
Immunity: Complies with all requirements
of EN 60601-1-2
Emissions: CISPR 11 group 1 class B
Approvals: UL 2601-1,
CSA C22.2 #601.1
IEC 601-1
EN 60601-1
© 2005 General Electric Company – All rights reserved.
GE and GE Monogram are trademarks of
General Electric Company.

Aestiva, Tec, PSVPro and Mechanical Link-25 are

trademarks of Datex-Ohmeda, Inc.

Datex-Ohmeda, Inc., a General Electric company,

going to market as GE Healthcare.

For more than 100 years, healthcare providers

worldwide have relied on GE Healthcare for medical
technology, services, and productivity solutions. So
no matter what challenges your healthcare system
faces, you can always count on GE to help you
deliver the highest quality healthcare. For details,
please contact your GE representative today.

GE Healthcare
P.O. Box 7550
Madison, WI 53707-7550
USA

www.gehealthcare.com

AN2594-K 7/05