Scribd
Upload
88 views

Sample Problem No. 5 Sample Problem No. 6

This document contains sample problems involving calculating shear and moment diagrams for beams and frames. There are 12 sample problems presented with brief descriptions of the beam or frame configurations and loads. The problems are meant to demonstrate drawing shear and moment diagrams using concepts like simple and fixed supports, method of superposition, and determining reactions at supports.

Uploaded by

MelvinGutierrezSingayan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
88 views

Sample Problem No. 5 Sample Problem No. 6

This document contains sample problems involving calculating shear and moment diagrams for beams and frames. There are 12 sample problems presented with brief descriptions of the beam or frame configurations and loads. The problems are meant to demonstrate drawing shear and moment diagrams using concepts like simple and fixed supports, method of superposition, and determining reactions at supports.

Uploaded by

MelvinGutierrezSingayan
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

7/27/2015

SAMPLE PROBLEM NO. 5 SAMPLE PROBLEM NO. 6


The flooring system for a building consists of a girder A reinforced concrete pier is used to support the
that supports laterally running floor beams, which in stringers for a bridge deck. Draw the shear and moment
turn support the longitudinal simply supported floor diagrams for the pier when it was subjected to the
slabs. Draw the shear and moment diagrams for the stringer loads shown. Assume the columns at A and B
girder. Assume the girder is simply supported. exert only vertical reactions on the pier.

SAMPLE PROBLEM NO. 7 SAMPLE PROBLEM NO. 8


Draw the shear and moment diagrams for the beam. The boards ABC and BCD are loosely bolted together as
shown. If the bolts exert only vertical reactions on the
boards, determine the reactions at the supports and
draw the shear and moment diagrams for each board.

SAMPLE PROBLEM NO. 9 SAMPLE PROBLEM NO. 10


The overhanging beam has been fabricated with Draw the shear and moment diagram for each member
projected arm BD on it. Draw the shear and moment of the frame. Assume the support A is a pin and D is a
diagrams for the beam ABC if it supports a load of 800 lb. roller.

1
7/27/2015

SAMPLE PROBLEM NO. 11 SAMPLE PROBLEM NO. 11


Draw the shear and moment diagram for each of the
three members of the frame. Assume the frame is pin
connected at A, C, and D and there is a fixed joint at B.

MOMENT DIAGRAMS MOMENT DIAGRAMS


CONSTRUCTED BY THE METHOD CONSTRUCTED BY THE METHOD
OF SUPERPOSITION OF SUPERPOSITION

SAMPLE PROBLEM NO. 1 SAMPLE PROBLEM NO. 2


Draw for the moment diagram for the beam using the Draw for the moment diagram for the beam using the
method of superposition. Consider the beam to be method of superposition. Consider the beam to be
cantilevered from pin at A. cantilevered from pin at A.

You might also like