Type SB4 Load Cell

IP68
APPROVED

Product Description Approvals

The type SB4 is a stainless steel beam type load cell with complete hermetic  OIML approval to C1 (Y = 5�����������
 ����������
000), C3,
sealing. It is a perfect fit for use in harsh industrial environments. C3 MI7.5, C4 and C4 MI7.5 (Y = 11 000)
 NTEP approval to 5 000 intervals, Class III
Application (for 5 kN to 50 kN)
 Platform scales, hopper and tank scales  ATEX hazardous area approval for Zone
0, 1, 2, 20, 21 and 22
Key Features  FM hazardous area approval
 Wide range of capacities from 5 kN to 100 kN (510 kg to 10 197 kg)
 Stainless steel construction Packed Weight
 Environmental Protection IP68 with complete hermetic sealing  Capacity (kN) 5–20 50 100
 Unique blind loading hole Weight (kg) 1.4 2.9 7.1
 High input resistance
 Calibration in mV/V/Ω Available Accessories
 Compatible range of application hardware
Options  Compatible range of electronics
 OIML approval to C3 MI7.5
 OIML approval to C4 MI7.5 (for 5 ... 50 kN)

A01-Rev3-GB-1(2)
WWW.FLINTEC.COM
 Specifications
Maximum capacity (Emax) kN 5 / 10 / 20 / 50 / 100 5 / 10 / 20 / 50
Metric equivalents (1 N=0.10197 kg) kg 510 / 1 020 / 2 039 / 5 099 / 10 197 510 / 1 020 / 2 039 / 5 099
Accuracy class according to OIML R60 (GP) C1 C3 C3 MI 7.5 C4 C4 MI 7.5
Maximum number of verification intervals (nmax) n.a. 1 000 3 000 4 000
Minimum load cell verification interval (vmin) n.a. Emax /5 000 Emax /11 000
Temperature effect on minimum dead load output (TC0) %*RO/°10C ≤ ± 0.0400 ≤ ± 0.0275 ≤ ± 0.0127
Temperature effect on sensitivity (TCRO) %*RO/°10C ≤ ± 0.0200 ≤ ± 0.0160 ≤ ± 0.0100 ≤ ± 0.0080
Combined error %*RO ≤ ± 0.0500 ≤ ± 0.0300 ≤ ± 0.0200 ≤ ± 0.0180 ≤ ± 0.0180 ≤ ± 0.0150
Non-linearity %*RO ≤ ± 0.0400 ≤ ± 0.0300 ≤ ± 0.0166 ≤ ± 0.0166 ≤ ± 0.0125 ≤ ± 0.0125
Hysteresis %*RO ≤ ± 0.0400 ≤ ± 0.0300 ≤ ± 0.0166 ≤ ± 0.0066 ≤ ± 0.0125 ≤ ± 0.0066
Creep error (30 minutes) / DR %*RO ≤ ± 0.0600 ≤ ± 0.0490 ≤ ± 0.0166 ≤ ± 0.0066 ≤ ± 0.0125 ≤ ± 0.0066
Rated Output (RO) mV/V 2 ± 0.1%
Calibration in mV/V/Ω (A...I classified) % ≤ ± 0.05 (≤ ± 0.005)
Excitation voltage V 5...15
Zero balance %*RO ≤±5
Input resistance (RLC) Ω 1 100 ± 50
Output resistance (Rout) Ω 1 000 ± 2
Insulation resistance (100 V DC) MΩ ≥ 5 000
Safe load limit (Elim) %*Emax 200
Ultimate load %*Emax 300
Safe side load %*Emax 100
Compensated temperature range °C –10...+40
Operating temperature range °C –40...+80 (ATEX –40...+60)
Load cell material stainless steel 17-4 PH (1.4548)
Sealing complete hermetic sealing; cable entry sealed by glass to metal header
Protection according EN 60 529 IP68 (up to 2 m water depth) / IP69K

The limits for Non-Linearity, Hysteresis, and TCRO are typical values.
The sum of Non-linearity, Hysteresis and TCRO meets the requirements according to OIML R60 with pLC=0.7.

Dimensions (in mm)

L1 41
L2 L3 L4 ØD1
30 H4 H5
A Ø4

H1
H3
H2
A
ØD2 (2x) W
A-A
L5

Type L1 L2 L3 L4 L5 H1 H2 H3 H4 H5 W D1 D2 Mounting bolts Torque*

SB4-5/10/20 kN 155 15 80 35 76 36 6 21 7 4 30 18 13 M12 8.8 90 Nm
SB4-50 kN 190 21 105 40 93 49 8 28.5 6 8 43 25 21 M20 8.8 400 Nm
SB4-100 kN 245 30 135 50 120 73 12.5 42 10 n.a. 60 30 27 M24 8.8 700 Nm

* Torque values assume oiled threads.

Wiring
 The load cell is provided with a shielded, 4 conductor cable (AWG 24).
+ Excitation (green)
Cable jacket polyurethane
 Cable length: 3 m for SB4-5 kN/10 kN/20 kN
+ Signal (white)
4.5 m for SB4-50 kN/100 kN
 Cable diameter: 5 mm
 The shield is floating – Excitation (black)
(On request the shield can be connected to the load cell body) – Signal (red)
Shield (yellow)

A01-Rev3-GB-2(2) Specifications and dimensions are subject to change without notice.

WWW.FLINTEC.COM