MAS TRAINING

COURSES 2019- 2020

For further information and reservation

please call us on:Tel.: +2 (02) 25242842 - 01015101193
Email: [email protected]
Introduction:
As an introduction for the importance of regular training to increase your employee
proficiency and job performance, if you would like to concur with latest technology for
increasing the productivity of your employees, you need to be aware of the first class up-
to-date industrial instrumentation & control technology to be competitive in the global
marketplace Therefore, we believe that at MAS Trading, we have got what you need to
train your employees.

 MAS Trading is providing training courses, keeping employees current on the

latest technology of Control System & Automation.

 MAS Trading provides a comprehensive selection of first class industrial Control

System & Automation training products.

 MAS Trading can arrange On-site and Specific training classes which allow
scheduling flexibility as well as "customer-defined" course content, including
standard, tailored, and customized application-specific training development and
implementation are also feasible.

 MAS Trading can also arrange for training courses at your premises, or should you
need to attend courses outside Egypt we can manage it according to your needs .

 MAS Trading instructors, whose technical skills are annually assessed and
updated, are professional trainers with current "hands-on" application experience.

 MAS Trading can provide Control System & Automation Training Tracking. In
other words, if you need to prepare specialists in certain Control System &
Automation, we can prepare a special curriculum to be conducted to your engineers
so as to perform all their related activities including maintenance, troubleshooting,
etc.
22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193
www.masautomation.com ● [email protected]
 Training Courses 2019 - 2020
PLC Courses
To introduce students to the concepts and operation of S7 programmable controllers, including the following
areas:
1- SIMATIC S7® Basic s7 300/400

• Introduction and brief history of PLC controls •Using Step7.

FUNDAMENTALS OF PLC HARDWARE •Create new program, download and upload it to PLC.
• Block diagram of typical PLC • Program different bit logic instructions.
• PLC processor module - memory organization • Ladder programming overview.
• Input and output section - module types • Binary and Arithmetic operations.
• Power supplies. • Program timers and counters.
• The simatic manager software packages. •Program comparison operations.
• Hardware configuration. • Digital and analogue processing .
•Use different blocks (OB, DB and FB).
2- SIMATIC S7® Advanced S7 300/400 Programming

• Programming review. • Functions, function blocks and multi-instances.

• Data blocks and complex variables. • Jump commands and Accumulator operations.
• Organizations blocks. • Configuration of Breakpoints as a debugging tool .
• comparing software versions. • Memory Indirect addressing.
• System troubleshooting. • Error management with error organization blocks.
• Analog value processing. • Analyzing S7 diagnostic data..

3- S7® 300/400 Maintenance

• Simatic S7 system family overview.
• Locate and replace faulty modules
• The Simatic manager software packages.
• Reload programs.
• Hardware Configuration.
• Implement changes to the program.
• Block architecture and program editors.
• Using the SIMATIC S7 programmer to connect online
• Symblos.
and monitor programs
• Binary operations.
• I/O Fault finding.
• Download program to CPU.
• Introduction to communications.
• Troubleshooting.
4- Micro win S7® 200 5- S7®-200 Maintenance
• Hardware architecture of the S7 range of • Locate and replace faulty modules.
controllers (S7-200) • Reload programs.
• Siemens S7 system addressing • I/O Fault finding.
• Data format
• Introduction to communications.
• Project / Program structure
• Implement changes to the program.
• Hardware configuration
• Communicating with the PLC • Using the Simatic S7 200 programmer to connect online
• Downloading and uploading PLC programs and monitor programs to determine plant problems.

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
6- S5® Course Description 7- S7® Communications Course
• Numbering system review • Industrial Ethernet
• Step 5 software introduction • PROFINET
• Setting the Step 5 project • PROFIBUS
• Step 5 System Overview • AS-Interface
• Transferring program and data blocks • Point-to-point connection
• Monitoring Blocks • MPI connection

SCADA&HMI Courses
To introduce students to the concepts and operation of SCADA &HMI, including the following areas:

1- Simatic WinCc Flexible HMI Course

• Components of a SCADA control system

• Software - design of SCADA packages • Create tags from the STEP7 symbol table.
• Configuration of SCADA control systems • Design graphic screens and tools.
• Connecting SCADA and PLC controls • Configure internal and external tags.
• SCADA control system design • Human and ergonomic factors
• User administrations. • HMI configuration
• Trends configuration. • Design and layout
• Create and manage a WinCC Flex project. • Alarming and reporting philosophies
• Integrate components between WinCC Flex and • Alarm system design
STEP 7.

2- Basic Wonderware InTouch 3-Advanced Wonderware InTouch

• I/O Communication
• I/O Communication Protocols
• Configuring I/O Communication
• Create and manage intouch project. • Troubleshooting I/O
• Integrate component between intouch and STEP 7. • Advanced Tag Functionality
• Create tags from the STEP7 symbol table.
• Design graphic screens and tools. • Indirect Tags
• Creating and Using Indirect Tags
• InTouch Super Tags
• Deleting Tags

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
 -
AC Drives

 Preventing Electrostatic Damage to Drive

Components
 Recognizing DC Motor Hardware and
Operation  Recognizing DC Drive Hardware and Functions

 Recognizing AC Motor Hardware and  Recognizing AC Drive Hardware and Functions

Operation  Recognizing AC and DC Motor Braking Methods

 Selecting a Replacement Motor  Testing a Drive Using Electrical Measuring Tools

 Recognizing Line Protection and Filtering  Performing Pre-Power and Power-On Checks

Device Hardware and Functions  Monitoring and Controlling a Drive Using The
HIM
 Selecting a Drive for Basic Applications

Process Instrumentation course

Instrumentation terms, concepts, diagrams and
symbols. Pressure sources and the basic terms of pressure
How to implement an instrument and wiring measurement.
number system. Level measurement and the basics associated with it.
The importance of process control. Temperature measurement and the various associated
Control theory basics.  transducers.
Single loop PID Controllers . Flow measurement techniques – include
PLC PID control and how signals are connected Electromagnetic flowmeters and ultrasonic
and how the controllers are configured. Control valve principles and common valve types
Closed-loop versus open-loop control. New technologies such as smart instrumentation and
Components of control loops and ISA symbology fieldbus
Primary element/sensor How to integrate a complete system (considering
Transducer instrumentation and total errors) as well as selection
Converter
Transmitter criteria, commissioning and testing
Signal  Temperature MEasurements that include thermocable ,
Indicator PT100 and temperature switches .
Recorder
Controller  Pressure measurements that include Gages,Pressure
Correcting element/final control element transmitters pressure switches.
Actuator  Level measurements that include some type of level
instruments and level switches.
Controller algorithms and tuning.
Process control systems.  P&IDs concept according to ISA standards and how to
An overview of the use of PLCs in industrial apply it on process flow diagram.
applications.

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
 Medium Voltage cable termination

• Introduction • Medium voltage system construction (terminals and

• Different between low voltage & medium voltage joints)
and high voltage cables • Methods for making terminations for medium voltage
• Medium voltage cable types cables (theoritically & practically with tools)
• Medium voltage cable construction • Experience the process on the end of medium voltage
cable (sample



Power Transmission Distribution

• Types of transformers
• Introduction
• Low voltage system
• Basics and principles of transformers
• Load calculations



Electrical Motor maintenance (Maintenance & Rewinding)

Maintenance Rewinding
• Types of motors ‫لف المحركات التراكمى‬
• Work idea of AC motors ‫لف المحركات الموجى‬
• Introduction in motor windind ‫لف المحركات ال‬AC
• Motor winding terms ‫لف المحركات ال‬DC
• Motor winding materials ‫لف المحركات ذات السرعتين‬
• Drawing and wiring ‫خطوات لف محرك تالف عملى‬
 

Mechanical Courses
1- Basic Hydraulic course

Basic Principles and Symbols.

 Filters and Filtration Technology.
 Hydraulic Pumps.
 Accessories.
 Hydraulic Cylinders.
Trouble shooting and problem solving.
 Accumulators and Accumulator Applications.
 Hydraulic fluids.
Hydraulic Control Valves, Directional Valves,
Pressure control valves, Flow control valves,
Non return valves.

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
 2-Advanced Hydraulic course
 Planning Hydraulic Systems.

Hydraulic Fluids and Internal protection of

Power unites.  Filteration in Hydraulic Systems.

 Pump and Pump control system.  The Thermal Design of Hydraulic Systems .

 Pressure control Valves and associated  Noise Reduction.

circuitry ,Direction control valves,Flow control
valves, check valves.  Commissioning Hydraulic Installation.

 Safety Regulation for Accumulator in Hydraulic  Maintaining Hydraulic Installation.

systems.

3- Pneumatic Training Course

 Pneumatic Control Elements : Directional Control Valves
 Properties and Application Areas of Pneumatics . , Isolating,Choke,Pressure control Valves , Special Valves .

 Compressed Air as an Energy Source : Generation ,  Piping,Fittings, Accessories .

Preparation , Distribution .  Speed control including flow control valves, quick
 Overview of compressors, dryers and distribution exhaust valves

 Pneumatic Drives : Cylinders Types and  Basic Pneumatic Circuits Types, Practical Circuit
Construction . Examples .

 Exercises : Graphical Symbols for valves and devices .

Mechanical Courses
1- Rolling Bearing Course
Types of rolling bearing:
Bearing introduction • Radial Ball Bearing.
History of rolling Bearing. • Radial Roller Bearing.
Basic knowledge of rolling bearing: • Axial Ball Bearing.
• Fundamentals of rolling bearing technology. • Axial Roller Bearing.
• Bearing components, terminology. Bearing Housing.
• Bearing cage, types. Plain Bearing.
• Basic loads. Bearing lubrication.
• Factors effecting the performance of rolling Handling of rolling bearing:
bearings. • Storage of Bearing.
• Clearance. • Mounting of Bearing.
• Fits and tolerances. • Dismounting of Bearing.
22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193
www.masautomation.com ● [email protected]
• Design of bearing arrangements. Bearing Failure.
• Rolling Bearing Designation.

2-Maintenance Management Course

 
 
• General definitions •MRO Management & Inventory calculation
• Overview on maintenance • How to utilize CMMS in Asset Management & Work
• Maintenance Management Process Management
• Maintenance Function
• Maintenance Main Pillars
• Maintenance classification based on (Cost, •Understand the different between Maintenance
Priorities, Policies) planning & scheduling
• Case Study to understand the meaning of maintenance
planning
Maintenance strategies • Planning Function and Planning roles
• Maintenance Polices • Work Scope development & Work Package Preparation
• Understand the different between Preventive • Resources Estimations (Manpower & Tools & Material)
Predictive Maintenance • Scheduling management
•Understand the different between Proactive & •Maintenance Priority
Reactive Maintenance • Backlog Management
• Reliability Excellence& Reliability Engineering
• Advanced Maintenance tools
• Reliability centered Maintenance Approach • Maintenance budget and cost control
• Overview on CMMS & ERP • Maintenance Performance Management
• What Should CMMS do • Maintenance key performance indicators
• CMMS benefits • Maintenance Reports and Audit
• Overview on work management • Maintenance performance benchmarks and best
• CMMS implementation practices

3-Mechanical Maintenance Course

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
Types of maintenance
• Measurements
• Rotating equipment maintenance (pumps –
• Machinery Lubrication
compressors)
• Fits and tolerance
• Power transmission ( bearing – Gears- belts –
chains - coupling) • Sealing
• Machinery Lubrication 

• Fits and tolerance
• Sealing


22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
Reference List For MAS Trading In Training Field :

 Wonder ware Intouch advanced for Venus Internation free zone Alex.

 Control Diploma Sedico Factory.

 Control Diploma Arma Factory.

 Control Diploma Sinco.

 Hydraulic courses Mediterranean Wool Manufacturing Company.

 Control Diploma Mediterranean Wool Manufacturing Company.

 Instrumentation course Mediterranean Wool Manufacturing Company.

 SIMATIC Advanced step7 to Cairo Electricity Production Company.

 PLC Advanced Step 7 Lipton company.

 PLC Advanced Step7 Alexandria sugar company.

 PLC Basic & Advanced ABB Antar Steel Company.

 PLC Advanced Step7 Cocacola Company .

 PLC Basic & Advanced Step 7 HP Filler .

 SIMATIC Basic step7 to Benghazi Power Station at our Centre.

 WINCC to West Tripoli power station at our Centre.

 Simulation for Simple Gas Turbine ElSereer Station Libya at Triumph Hotel Heliopolis .

 Wonder ware in touch for Upper Egypt for Generation power Korymat1 Station.

 IN Touch Simulator to Libya Electricity Production.

 IN Touch Scada for Group Ezz Steel at Alexandria.

 Intouch training for Nestle’ Egypt at our center.

 Step 7 advanced for West Cairo power station.

 SIMATIC Basic Step7 for Nubaria for sugar at Nubaria.

 WinCC advanced for Upper Egypt for Generation power Korymat 2

 SIMATIC Basic step7 to GUC.

 Step 7 advanced to GUC.

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]
 Communication Interface to GUC.

 Electric sensors, Circuit breaker and Contactors at EZZ steel.

 Basic and Advanced Step7 to Regina factory.

 Simulator at OGS Company

 S5 at Midor Site in EPROM Company.

 And others like graduation students and new engineers and so on.

22,107 street, Maadi. ● Tel.: 02 25242842● Fax: 02 25242843 ● Mobile: 01015101193

www.masautomation.com ● [email protected]