Scribd
Upload
64 views2 pages

Sag-Masonry NC Ii

This document is a self-assessment guide for the Masonry NC II qualification. It contains a checklist for candidates to self-assess their skills in laying concrete hollow blocks for structures and plastering wall surfaces. The checklist includes tasks like using personal protective equipment, reading drawings, selecting tools, establishing wall lines, installing reinforcing bars, spreading and laying blocks, checking alignment, scraping mortar joints, and completing plastering and cleaning work according to specifications and safety standards. Candidates must check "yes" or "no" next to each task and sign to agree to skills assessment.

Uploaded by

Maryrose Macabuhay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
64 views2 pages

Sag-Masonry NC Ii

This document is a self-assessment guide for the Masonry NC II qualification. It contains a checklist for candidates to self-assess their skills in laying concrete hollow blocks for structures and plastering wall surfaces. The checklist includes tasks like using personal protective equipment, reading drawings, selecting tools, establishing wall lines, installing reinforcing bars, spreading and laying blocks, checking alignment, scraping mortar joints, and completing plastering and cleaning work according to specifications and safety standards. Candidates must check "yes" or "no" next to each task and sign to agree to skills assessment.

Uploaded by

Maryrose Macabuhay
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TESDA-OP-QSO-02-F07

Rev. No. 00 03/01/17

Reference. No.

SELF-ASSESSMENT GUIDE

Qualification: MASONRY NC II

Units of competency  Lay Concrete Hollow Blocks for Structures


covered:  Plaster Wall Surface

Instruction:
 Read each of the questions in the left-hand column of the chart.
 Place a check in the appropriate box opposite each question to indicate your answer.

Can I? YES NO

 Uses personal protective equipment (PPE) in accordance with


Rule 1080 of Occupational Safety and Health Standards*
 Read and interpret drawings and specifications*

 Select and prepare materials, tools and equipment consistent


with the job requirements*

 Establish location of concrete hollow block wall based on


reference building/wall lines *

 Install and mark horizontal / vertical guide for hollow blocks


according to specifications*

 Install reinforcing bar / dowel according to job specifications*

 Spread mortars on the base /edge of hollow block according


to job specifications*

 Lay hollow block on the line according to job specifications*

 Perform constant checking of plumbness and alignment


during hollow block laying

 Scrape excess mortar on joints*

 Clean and keep work site safe following OSHC requirements

 Perform jointing process in accordance with job


specifications*

CONMAS218-0719 ver. 1.00 1


Masonry NC II
 Perform finishing touches according to job specifications *

 Checks plaster thickness prior to wall surface preparation *


 Perform wall surface preparation according to established
plastering procedures
 Performs wall plaster according to established procedures *
 Cleans work area according to safety and environmental
regulations
I agree to undertake assessment in the knowledge that information gathered will only be used
for professional development purposes and can only be accessed by concerned assessment
personnel and my manager/supervisor.

Candidate’s Name and Signature Date

CONMAS218-0719 ver. 1.00 2


Masonry NC II

You might also like