Port Numbers For Port Forwarding
Port Numbers For Port Forwarding
These are common programs and the ports they use for network access.
The software maker has complete information and instructions, consult them if these ports do not
work!
For a description of port forwarding, and configuration instructions, see How is Port Forwarding
Configured?
All NETGEAR router ports are closed by default to incoming traffic. (No port is closed
to outgoing traffic.)
NETGEAR routers pass incoming and outgoing traffic on the same port.
Unless your router manual says otherwise, TCP and UDP traffic are passed through the
same port, and both are opened or closed together.
Macintosh, Unix and Windows use the same port numbers.
These are typical port assignments, others are possible.
Where more than one port is specified, it may be that all the ports are required by the
application.
Go to the router's Port Forwarding Menu to enter the port numbers and IP address of the server.
The default IP range is 192.168.0.XXX (When using DCHP).