Scribd
Upload
25 views

Display Con Mando A Distancia

This document contains code to control a 7 segment display with an infrared remote control. It defines pin assignments for the display segments and receives IR codes to determine which number to display by turning on the appropriate segments.

Uploaded by

Publio Eduardo Salinas Grimaldo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
25 views

Display Con Mando A Distancia

This document contains code to control a 7 segment display with an infrared remote control. It defines pin assignments for the display segments and receives IR codes to determine which number to display by turning on the appropriate segments.

Uploaded by

Publio Eduardo Salinas Grimaldo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

//Canal de YouTube -> RobotUNO

//Display de 7 segmentos controlado con MANDO A DISTANCIA

#include "IRremote.h"
#define a 2
#define b 3
#define c 4
#define d 5
#define e 6
#define f 7
#define g 8

int receiver = 11;


IRrecv irrecv(receiver);
decode_results results;

void translateIR(){
switch(results.value){
case 0xFF6897: Serial.println("0");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, LOW);
break;
case 0xFF30CF: Serial.println("1");
digitalWrite(a, LOW);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, LOW);
break;
case 0xFF18E7: Serial.println("2");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, LOW);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, LOW);
digitalWrite(g, HIGH);
break;
case 0xFF7A85: Serial.println("3");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, HIGH);
break;
case 0xFF10EF: Serial.println("4");
digitalWrite(a, LOW);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
break;
case 0xFF38C7: Serial.println("5");
digitalWrite(a, HIGH);
digitalWrite(b, LOW);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
break;
case 0xFF5AA5: Serial.println("6");
digitalWrite(a, HIGH);
digitalWrite(b, LOW);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
break;
case 0xFF42BD: Serial.println("7");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, LOW);
digitalWrite(e, LOW);
digitalWrite(f, LOW);
digitalWrite(g, LOW);
break;
case 0xFF4AB5: Serial.println("8");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, HIGH);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
break;
case 0xFF52AD: Serial.println("9");
digitalWrite(a, HIGH);
digitalWrite(b, HIGH);
digitalWrite(c, HIGH);
digitalWrite(d, HIGH);
digitalWrite(e, LOW);
digitalWrite(f, HIGH);
digitalWrite(g, HIGH);
break;
case 0xFFFFFFFF: Serial.println("ERROR");break;
default:
Serial.println("Otro botón");
}
delay(500);
}

void setup() {
Serial.begin(9600);
Serial.println("MANUALIDADES Y EXPERIMENTOS");
irrecv.enableIRIn();
for(int i=2 ; i<=8 ; i++){
pinMode(i,OUTPUT);
}
}

void loop(){
if (irrecv.decode(&results))
{
translateIR();
irrecv.resume();
}
}

You might also like