2

ProInert®
Equipment Section
System Equipment
Section
Argon Nitrogen

ProInert is made up of
blends of Inert Gases
that occur naturally in
the atmosphere

Carbon
Dioxide
 Fike’s ProInert Inert Agents
IG-55 IG-541
52% Nitrogen (N2)
50% Nitrogen (N2)
40 % Argon (Ar)
50% Argon (Ar)
8% Carbon Dioxide (CO2)
Globally Accepted
NFPA 2001 & ISO 140520
Safe for People
ProInert is safe for 80
use in occupied 70
spaces at 60 Argon
concentrations up to 50 Nitrogen
52%. 40 Oxygen
30 CO2
20
A ProInert discharge 10
simply alters the ratio 0
of Nitrogen, Argon & 0 .1 % 78 % 21 % 0.3 %
CO2 vs. Oxygen.
The Air we Breathe
Safe for People
Typical 42% Design 70
Concentration results 60
in an Oxygen level 50 Argon
suitable for Occupied 40 Nitrogen
Spaces 30 Oxygen
(Ref. NFPA 2001) CO2
20
10
0
17 % 70 % 12.5 % 0.3 %

The Air After a Typical IG-55 Discharge

Safe for People
Typical Design 70
Concentrations result 60
in an Oxygen level 50 Argon
suitable for Occupied 40 Nitrogen
Spaces 30 Oxygen
(Ref. NFPA 2001) CO2
20
10
0
16 % 70 % 12.5 % 1.5 %

The Air After a Typical IG-541 Discharge

Inert Gas Features and benefits:
• Natural gas present in the atmosphere
• Suitable for occupied areas
• No toxic or corrosive decomposition products from agent
• Colorless, odorless, compressed gas
• Fogging does not occur when agent is discharged
• Electrically non‐conductive
• No residue to clean up after discharge
• Zero ozone depleting potential
• Zero global warming potential
• Listing and Approvals: UL / ULC Listed & FM Approved
Inert Gas Applications and uses:
• Class A: Non-Energized surface
fires (wood, paper, plastic)
• Class C: Energized Electrical
Hazards (Telecommunications
Facilities, computer rooms and
other high value assets, where
down‐time associated with
sprinkler systems would be too
costly)
Inert Gas Applications and uses:

• Class B: Chemical
Storage/Processes, Labs, etc.
(Consult Fike for specific
Design Concentration
requirements)
Inert Gas Application limitations:
Per NFPA 2001, Clean Agent systems shall “NOT” be used on fires
involving the following materials:
• Chemicals or mixtures of chemicals that are capable of rapid
oxidation in the absence of air.
(Examples include: Cellulose Nitrate and Gunpowder)
• Reactive metals such as Lithium, Sodium, Potassium, Magnesium,
Titanium, Zirconium, Uranium, and Plutonium
• Metal hydrides such as Sodium Hydride and Lithium Aluminum
Hydride
• Chemicals capable of undergoing auto‐thermal decomposition.
(Examples: Organic Peroxides and Hydrazine)
Inert Gas Typical Design Concentration / Oxygen Levels

Design Concentration / Oxygen Maximum Human Exposure

Hazard Type
Levels Time
Up to 43% / 12% Min. 5 minutes
Normally Occupied Spaces
43% to 52% / 12% to 10% 3 minutes
52% to 62% / minimum 8% 30 seconds
Normally Un-Occupied Spaces
Above 62% / 8% or lower No permitted exposure

Ref. NFPA 2001, Table A.1.5.1.3(a)

Inert Gases should not be used in Occupied spaces at

concentrations greater than 52%
IG-55 / IG-541 is stored as a compressed gas
blend in high pressure cylinders
Cylinders available in 200 or 300 bar charging capacity.

Cylinder Dimensions Mounting

Cylinder Size
Height in. (mm) Width in. (mm) Position

80 Liter (water
69” (1753) 11-1/4” (286) Upright
capacity)

200 bar and 300 bar utilize the same cylinder

body and valve.
Cylinders available in 200 or 300 bar charging capacity.

Cylinder Specifications
IG-55 IG-541
IG71-103-200-55 (200 bar) IG71-103-200-541 (200 bar)
Cylinder Part Number
IG71-103-300-55 (300 bar) IG71-103-300-541 (300 bar)

Cylinder Pressurization 2,900 psi @ 60°F (200 bar @ 15°C)

Level 4,351 psi @ 60°F (300 bar @ 15°C)
572.3 ft3 (16.2 m3) @ 200 bar 598.5 ft3 (16.9 m3) @ 200 bar
Cylinder Agent Capacity
823 ft3 (23.3 m3) @ 300 bar 856.4 ft3 (24.3 m3) @ 300 bar
Cylinder Storage
Temperature -4°F to 120°F (-20°C to 49°C)
Limitations
Cylinders available in 200 or 300 bar charging capacity.

Cylinder Specifications

Cylinder Color Signal Red

Cylinder Tare Weight 250 lbs. (113.4 Kg) Approx.

300 lbs. (136 Kg) Approx. @ 200 bar

Cylinder Gross Weight
IG-55
321 lbs. (145.6 Kg) Approx. @ 300 bar

Cylinder Gross Weight 301 lbs. (136.5 Kg) Approx. @ 200 bar
IG-541 324 lbs. (146.9 Kg) Approx. @ 300 bar
Cylinders available in 200 or 300 bar charging capacity.

Cylinder Specifications

DOT 3AA3000 (U.S. Dept. of Trans.)

Cylinder Rating TC-3AAM (Transport Canada)

EN ISO 9809-2 & TPED 1999/36/EC

Listings & Approvals UL / ULC / Factory Mutual

Items furnished with 200 bar and 300 bar Cylinders.
Shipping Cap
Self-Regulating Valve

Cylinder I.D. Label

Each ProInert Cylinder is equipped with:

• 200 bar or 300 bar valve with appropriate
gauge or gauge/switch combination
• Shipping Cap
• Cylinder I.D. Label
Items furnished with 200 bar and 300 bar Cylinders.

Shipping Cap

• Each ProInert Cylinder is fitted with a

safety/shipping cap
• Cap to be retained for future use.
• Shipping Cap required on cylinder at
all times during shipping, handling &
installation!
• Replacement Cap: P/N: 02-4829
Items furnished with 200 bar and 300 bar Cylinders.

Each ProInert Cylinder label indicates:

• Assembly No.
• Charge Pressure (200 or 300 bar)
• Tare, Gross & Agent Weight
• Year Manufactured
 Cylinders Fitted with Brass Valve

• The Fike ProInert Cylinder is

equipped with a pressure-
regulating outlet valve
designed to provide a
constant outlet pressure of
645 psi (44.5 bar) with a free
flow area of 12mm diameter.
 Cylinders Fitted with Brass Valve

• Each valve is equipped with a

combination pressure gauge and
low pressure switch on the
Primary cylinder(s) and pressure
gauge only on the Secondary
cylinders, providing visual
pressure monitoring, as well as
continuous cylinder pressure
monitoring at the control panel.
 Cylinder Completer Kits
Must be purchased separately.
Each System Cylinder MUST have one of
the following Completer Kits:

• Primary-Electric (PE)

• Primary Pneumatic (PP)

• Secondary Pneumatic (SP)

Primary-Electric Cylinders (PE)
UVO Primary-Electric refers to cylinder
operated by Universal Valve Operator
(UVO):
• “Primary” or “First” cylinder in
cylinder bank
• Requires a Universal Valve Operator
• Can be electrically (automatically)
operated via UVO connection to
control panel
• Can be manually operated by
manual button on UVO
Primary-Pneumatic Cylinders (PP)
Relay Actuator
Primary-Pneumatic refers to
cylinder(s) operated by Relay
Actuator:
• Utilizes Relay Actuator for
pneumatic operation
• Used on large systems with
cylinder banks exceeding 60
cylinders
 Secondary-Pneumatic Cylinders (SP)

Pneumatic Secondary-Pneumatic refers

Actuator
to cylinder(s) operated by
Pneumatic Actuator:
• Utilizes Pneumatic Actuator
for pneumatic operation
• All Non-Primary cylinders
are Secondary-Pneumatic
cylinders
 Cylinder Completer Kits
Completer Kits include the following
items:
• Appropriate Gauge or Gauge with
Low Pressure Switch
• Discharge Hose Kit
• Universal Valve Operator (UVO) or
• Relay Actuator Assembly or
• Pneumatic Actuator Assembly
• Appropriate Actuation Hose
 Completer Kits for IG-55 Primary Cylinders with
Electric/Manual Operation (PE) on NPT Pipe Network
Completer Kits: IG71-236-200-55-PE (200 bar)
IG71-236-300-55-PE (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
02-13571 Universal Valve Operator (UVO)
02-13280 DIN Connector
02-13713 Actuator Hose
02-14627 UVO Supervisor
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-55 Primary Cylinders with
Pneumatic Operation (PP) on NPT Pipe Network
Completer Kits: IG71-236-200-55-PP (200 bar)
IG71-236-300-55-PP (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-220 Pneumatic Relay Assembly w/ Actuation Hose
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-55 Secondary Cylinders with
Pneumatic Operation (SP) on NPT Pipe Network
Completer Kits: IG71-236-200-55-SP (200 bar)
IG71-236-300-55-SP (300 bar)
Part Number Description
02-13441 Pressure Gauge for 200 bar
or
02-13541 Pressure Gauge for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-55 Secondary Cylinders with
Pneumatic Operation & LPS (SPL) on NPT Pipe Network
Completer Kits: IG71-236-200-55-SPL (200 bar)
IG71-236-300-55-SPL (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-541 Primary Cylinders with
Electric/Manual Operation (PE) on NPT Pipe Network
Completer Kits: IG71-236-200-541-PE (200 bar)
IG71-236-300-541-PE (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
02-13571 Universal Valve Operator (UVO)
02-13280 DIN Connector
02-13713 Actuator Hose
02-14627 UVO Supervisor
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-541 Primary Cylinders with
Pneumatic Operation (PP) on NPT Pipe Network
Completer Kits: IG71-236-200-541-PP (200 bar)
IG71-236-300-541-PP (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-220 Pneumatic Relay Assembly w/ Actuation Hose
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-541 Secondary Cylinders with
Pneumatic Operation (SP) on NPT Pipe Network
Completer Kits: IG71-236-200-541-SP (200 bar)
IG71-236-300-541-SP (300 bar)
Part Number Description
02-13662 Pressure Gauge for 200 bar
or
02-13663 Pressure Gauge for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-541 Secondary Cylinders with
Pneumatic Operation & LPS (SPL) on NPT Pipe Network
Completer Kits: IG71-236-200-541-SPL (200 bar)
IG71-236-300-541-SPL (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-123 Discharge Hose Assembly with NPT Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-55 Primary Cylinders with
Electric/Manual Operation (PE) on BSP Pipe Network
Completer Kits: IG71-112-200-55-PE (200 bar)
IG71-112-300-55-PE (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
02-13571 Universal Valve Operator (UVO)
02-13280 DIN Connector
02-13713 Actuator Hose
02-14627 UVO Supervisor
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-55 Primary Cylinders with
Pneumatic Operation (PP) on BSP Pipe Network
Completer Kits: IG71-112-200-55-PP (200 bar)
IG71-112-300-55-PP (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-220 Pneumatic Relay Assembly w/ Actuation Hose
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-55 Secondary Cylinders with
Pneumatic Operation (SP) on BSP Pipe Network
Completer Kits: IG71-112-200-55-SP (200 bar)
IG71-112-300-55-SP (300 bar)
Part Number Description
02-13441 Pressure Gauge for 200 bar
or
02-13541 Pressure Gauge for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-55 Secondary Cylinders with
Pneumatic Operation & LPS (SPL) on BSP Pipe Network
Completer Kits: IG71-112-200-55-SPL (200 bar)
IG71-112-300-55-SPL (300 bar)
Part Number Description
02-13131 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14066 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-541 Primary Cylinders with
Electric/Manual Operation (PE) on BSP Pipe Network
Completer Kits: IG71-112-200-541-PE (200 bar)
IG71-112-300-541-PE (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
02-13571 Universal Valve Operator (UVO)
02-13280 DIN Connector
02-13713 Actuator Hose
02-14627 UVO Supervisor
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-541 Primary Cylinders with
Pneumatic Operation (PP) on BSP Pipe Network
Completer Kits: IG71-112-200-541-PP (200 bar)
IG71-112-300-541-PP (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-220 Pneumatic Relay Assembly w/ Actuation Hose
IG71-0166 Blank Plug Removal / Actuator Reset Tool
02-14802 Molykote 111 O-Ring Lubricant
Completer Kits for IG-541 Secondary Cylinders with
Pneumatic Operation (SP) on BSP Pipe Network
Completer Kits: IG71-112-200-541-SP (200 bar)
IG71-112-300-541-SP (300 bar)
Part Number Description
02-13662 Pressure Gauge for 200 bar
or
02-13663 Pressure Gauge for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Completer Kits for IG-541 Secondary Cylinders with
Pneumatic Operation & LPS (SPL) on BSP Pipe Network
Completer Kits: IG71-112-200-541-SPL (200 bar)
IG71-112-300-541-SPL (300 bar)
Part Number Description
02-14013 Pressure Gauge w/ Low Pressure Switch for 200 bar
or
02-14014 Pressure Gauge w/ Low Pressure Switch for 300 bar
IG71-003 Discharge Hose Assembly with BSP Check Valve
IG71-104 Pneumatic Actuator Assembly w/ Actuation Hose
02-14802 Molykote 111 O-Ring Lubricant
 Pressure Gauge with Low Pressure Switch
(Primary Cylinders)
• All “Primary” Cylinders are fitted
with a Pressure Gauge and Low
Pressure Switch Assy.
• Gauges are field removable and
can be replaced if necessary.
• Low Pressure Switch to be
monitored by control panel as a
“Supervisory” input.
Pressure Gauge with Low Pressure
Switch (Primary Cylinders)
Pressure Gauge Specifications
IG-55 IG-541
02-13131 (200 bar) 02-14013 (200 bar)
Assy. Part No.
02-14066 (300 bar) 02-14014 (300 bar)
2,434 psi / 168 bar 2,335 psi / 169 bar
decreasing (200 bar) decreasing (200 bar)
Pressure Setting
3,395 psi / 234 bar 3,480 psi / 240 bar
decreasing (300 bar) decreasing (300 bar)
Body Material Stainless Steel Body w/ Brass Pressure Connection
Pressure Connection M10 x 1
Pressure Gauge with Low Pressure
Switch (Primary Cylinders)
Pressure Gauge Specifications (Continued)
IG-55 IG-541
02-13131 (200 bar) 02-14013 (200 bar)
Assy. Part No.
02-14066 (300 bar) 02-14014 (300 bar)
Temperature Limits -4°F to +120°F (-20°C to +49°C)
Contact Ratings Single Pole. 4.5 to 24VDC/VAC, 5 to 100 mA; 3W
Wire Leads (2) 18 gauge x 8.5” (0.21 M) long
Listings & Approvals UL / ULC/ Factory Mutual
 Pressure Gauge only
(Secondary Cylinders)

• All “Secondary” Cylinders are

fitted with a Pressure Gauge
Assembly.
• Gauges are field removable and
can be replaced if necessary.
Pressure Gauge (Secondary Cylinders)

Pressure Gauge Specifications

IG-55 IG-541
02-13441 (200 bar) 02-13662 (200 bar)
Assy. Part No.
02-13541 (300 bar) 02-13663 (300 bar)
Temperature Limits -4°F to +120°F (-20°C to +49°C)
Pressure Connection M10 x 1
Body Material Stainless Steel Body w/ Brass Pressure Connection
Listings & Approvals UL / ULC / Factory Mutual
IG71-123, NPT Discharge Hose Kit
• Includes Discharge Hose & Check Valve
• Same Kit used on 200 bar and 300 bar

Discharge Hose Specifications

Part No. 02-10721
Pressure Rating 5,076 psi (350 bar)

G⅝ - ISO 228-1 (Female Connector w/

Thread Type Swivel Fitting)
R⅝ - ISO7-1 (Male Connector)

Overall Length 20-1/2” (520mm)

Min. Bend Radius 9.8” (250mm)

 IG71-123, NPT Discharge Hose Kit
• Check Valve required to make connection to
NPT pipe network

Check Valve Specifications

Part No. IG71-124
Pressure Rating 5,308 psi (366 bar)
RC⅝” - ISO7-1 (Female)
Thread Type
1” NPT Male
Overall Length 2.35” (66mm)
IG71-003, BSP Discharge Hose Kit
• Includes Discharge Hose & Check Valve
• Same Kit used on 200 bar and 300 bar

Discharge Hose Specifications

Part No. 02-10721
Pressure Rating 5,076 psi (350 bar)

G⅝ - ISO 228-1 (Female Connector w/

Thread Type Swivel Fitting)
R⅝ - ISO7-1 (Male Connector)

Overall Length 20-1/2” (520mm)

Min. Bend Radius 9.8” (250mm)

 IG71-003, BSP Discharge Hose Kit
• Check Valve required to make connection to
BSP pipe network

Check Valve Specifications

Part No. IG71-008
Pressure Rating 5,308 psi (366 bar)
RC⅝” - ISO7-1 (Female)
Thread Type
1” BSP Male
Overall Length 2.35” (66mm)
70-315, Universal Valve Operator Kit (UVO)
• At least 1 Cylinder must be designated as
“Primary” Electric and will require a UVO
Universal Valve Operator (UVO)
Universal Valve Operator Kit: 70-315
Item No. Part Number Description
1 02-13571 Universal Valve Operator (UVO)
2 02-13280 DIN Connector (4 pin, 5’ x 20 gauge)
3 02-13713 Actuation Hose (not shown)
4 02-14627 Universal Valve Operator Supervisor
 Universal Valve Operator (UVO)
Universal Valve Operator Kit Specs
Supply Voltage 24VDC
Alarm max: 912 mA
SHP Pro
Supervision max: 33.4 mA
Current Consumption
Alarm max: 930 mA
Cheetah Xi / Xi 50
Supervision max: 25.4 mA
Electrical Connection DIN Connector w/ cable & 1/2” NPT conduit connection
Material Stainless Steel body / Brass end-cap
Temperature Range -4°F to 120°F (-20°C to 49°C)
Listings and Approvals UL / ULC / Factory Mutual
 UVO Supervisor
• Meets current NFPA 2001 requirements (4.3.4.1)
• Provided with each UVO Kit (Replaces the “U” clip
used to secure the UVO to the discharge valve)
• Provides supervision of the physical connection of
the UVO
 UVO Supervisor
Universal Valve Supervisor Specs
Part No. 02-14627
.25” I.D. SST Flexible Conduit 34.75” long with 3/8”
Conduit
Electrical Connection
Wire Leads 44” long, 22 gauge
Temperature Range 32°F to 130°F (0°C to 55°C)
Listings and Approvals UL / ULC / Factory Mutual
 IG71-220, Relay Actuator Assembly
• Used in conjunction with UVO on cylinder banks
in excess of 60 cylinders to activate the Primary
Pneumatic cylinder(s)

Relay Actuator Assembly

IG71-220, Relay Actuator Assembly
Relay Actuator Assembly includes:
Part Number Description
IG71-120 Relay Actuator
02-13713 Actuation Hose (not shown)
 Relay Actuator
Relay Actuator Specs
Body Material Brass
Temperature Range -4°F to 120°F (-20°C to 49°C)
Listings and Approvals UL / ULC / Factory Mutual

02-14782, Reset IG71-220, Relay Actuator

Multitool
• Utilize 02-14782 Reset Multitool to insure Relay
Actuator has been properly reset prior to
installation!!
IG71-104, Pneumatic Actuator Assembly
• Used in conjunction with UVO on cylinder banks
with more than 1 cylinder
• Utilizes pneumatic pressure via UVO or Relay
Actuator to operate subsequent cylinders
IG71-104, Pneumatic Actuator Assembly

Pneumatic Actuator Assembly includes:

Part Number Description
IG71-203 Pneumatic Actuator
02-13713 Actuation Hose
 Pneumatic Actuator Assembly
Pneumatic Actuator Specs
Pressure Rating 4,400 psi (310 Bar)
Hose Length 22” (559 mm)
Minimum Bend Radius 1.6” (40 mm)
Listings and Approvals UL / ULC / Factory Mutual

IG71-0166, Reset Tool IG71-104, Pneumatic Actuator

• Utilize IG71-0166, Reset Tool to insure Pneumatic

Actuator has been properly reset prior to installation.
 Discharge Nozzle Assembly
• Brass Nozzle Body with Factory drilled Nozzle Orifice Plate
as determined by system flow calculations
• Only UL Authorized Drill Stations may drill custom Orifice
Plate and assemble nozzle assembly

Cir-Clip

Nozzle Orifice Plate

Nozzle Body
 Discharge Nozzle Assembly
Size Style Part Number • Available in ½” thru 2”
360° IG71-072 NPT sizes
1/2”
180° IG71-209 • 180° & 360° Styles
360° IG71-073
3/4 “
180° IG71-210
360° IG71-074
1”
180° IG71-211
360° IG71-215
1-1/4”
180° IG71-216
360° IG71-075
1-1/2”
180° IG71-212
360° IG71-214
2”
180° IG71-213
 IG71-076, Manifold Safety Disc
• Used on closed manifolds to prevent entrapment of
high pressure from accidental release (used behind
check valves & selector valves)
Manifold Safety Disc Specs

1,275, - 1,475 psi

Burst Pressure
(88 – 102 bar)

Material Brass Body / Nickel Disc

Thread Size 1/2” NPT

Listings and Approvals UL / ULC / Factory Mutual

 IG71-202, Discharge Pressure Switch
• Used to transmit a positive pressure signal to the control
panel upon agent release
• Reset by pushing plunger back in

Discharge Pressure Switch Specs

Operating Pressure 100 psi (690 kPa) Min.
Switch double-pole, single-throw
Electrical Rating 1/2” NPT
1/4” NPT Female (pneumatic
Connection connection)
1/4” NPT (Conduit inlet)
Listings and Approvals UL / ULC / Factory Mutual
 IG71-240, Odorizer
• Injects a small amount of Wintergreen scent into the agent
as it is being discharged
• This is an optional item on most systems

Odorizer Specs
Odorizer Part Number IG71-240
Rebuild Kit Part Number IG71-241
Thread size 3/4” NPT
Material Brass Body
Listings and Approvals UL / ULC / Factory Mutual
 Cylinder Mounting Hardware
• Composed of Unistrut, threaded rod and special
clamps
• Available in multiple single, double and triple row
configurations
Front Support

Rear Support

Double-Row Clamp Rod

Configuration
shown
Single Row & Double Row Cylinder Racks
Cylinder Arrangement
Rack Assembly (Cylinder Quantity per row) Total Cylinder
Part Number Back Middle Front Quantity
Row Row Row
IG71-081-001 1 1
IG71-081-002 2 2
IG71-081-003 3 3
IG71-081-004 4 4
IG71-081-005 5 5
IG71-082-001 1 1 2
IG71-082-002 2 2 4
IG71-082-003 3 3 6
IG71-082-004 4 4 8
IG71-082-005 5 5 10
Triple Row and Variable Cylinder Racks
Cylinder Arrangement
Rack Assembly (Cylinder Quantity per row) Total Cylinder
Part Number Back Middle Front Quantity
Row Row Row
IG71-083-001 2 2 2 6
IG71-083-002 3 3 3 9
IG71-083-003 4 4 4 12
IG71-083-004 5 5 5 15
IG71-084-001 4 3 7
IG71-084-002 5 4 9
IG71-085-001 4 4 3 11
IG71-085-002 5 5 3 13
IG71-085-003 5 5 4 14
Aerial View - Cylinder Rack Configurations
Manifold Bracket Hardware

• Manifold support brackets used in

pairs to support heavy manifold
pipe.
• Available in single, double and
triple row deep configurations
• Can span 1 – 5 containers wide per
row
• Floor Mounting hardware also
available
Manifold Brackets
02-11883, Single Row Manifold Bracket
(1 Row Deep)

02-11884, Double Row Manifold Bracket

(2 Rows Deep)

02-11885, Triple Row Manifold Bracket

(3 Rows Deep)
Manifold Floor Mount Support Hardware
Bracket
Floor Mount Bracket included with Additional Hardware
Support Part Support Included
Number
Qty. Part Number Post Base Tee Plate
Tee Plate
IG71-065-1 1 02-11883 1 2

IG71-065-2 1 02-11884 1 2

IG71-065-3 1 02-11885 1 2
Tee Plate

Post Base
 Selector Valve Assembly
• Provides a means of diverting agent discharge into a
designated zone
• Allows a cylinder bank to be used to protect one of
several hazards
• Must have a minimum of 2 Selector Valves
 Selector Valve Assembly
Selector Valve Assembly Includes:
• Selector Valve w/ Actuator
• Valve Position Monitor
• Relief / pop-off valve
• 3’ long hose with fittings and adapters
• UVO Kit with release fitting (1/4” NPT, Male)

Pop-off relief valve

Selector Valve
UVO Kit

Agent to protected Agent from

hazard Cylinders
 Selector Valve Assembly Operation
• UVO operation allows discharge pressure to transfer through hose
and operate the selector valve, opening it and allowing agent to
flow to the affected hazard.
• Venting of excess pressure during discharge is accomplished by
pressure relief valve
• Manual venting through relief valve will allow spring loaded
Selector Valve to return to it’s normal state

Pop-off relief valve

Selector Valve UVO Kit

Agent to protected Agent from

hazard Cylinders
Selector Valve Assembly Post-Operation
Service Requirements!!
• After Selector Valve activation, UVO MUST be reset!!
• Release Fitting Valve Core (02-13887) MUST be replaced after
each activation.
• Failure to reset UVO and replace valve core will result in
unintended Selector Valve activation in the future due to pressure
leak through valve core!
Selector Valve UVO Kit

IG71-111,
Release Fitting
 Selector Valve Assembly
Selector Valve Specs
Part Number Valve Size Thread Size
IG71-233-10-CD 1” 1” NPT Female (25 mm)
IG71-233-15-CD 1-1/2” 1-1/2” NPT Female (40 mm)
IG71-233-20-CD 2” 2” NPT Female (50 mm)
IG71-233-30-CD 3” 3” NPT Female (80 mm)
Material Carbon Steel or Stainless Steel (Specify)
Actuation Pressure 116 psi (8 bar) Minimum
Approvals FM Only
Selector Valve System Example
 System Signs
02-11776
Caution / Exit Sign
(Black text over white and yellow
background)

02-11777
Caution – Do Not Enter Sign
(Black text over white and yellow
background)

02-11778
Manual Release Station Sign
(Black text over white background)
System Piping
• Schedule 40 or 80, Threaded,
Welded or Grooved(*)Pipe shall be
used
• Black or Galvanized Pipe is
acceptable
• Cast Iron Pipe, Steel Pipe
conforming to ASTM A120 or Non-
Metallic Pipe shall not be used
• All pipe shall conform with the
appropriate code for your
installation (NFPA 2001, ISO14520
or EN 15004)
• *Minimum piping design pressure
of 870 psi @ 68°F (60 bar @ 20°C)
• Refer to table in Manual
System Fittings
• Minimum piping design pressure of 870
psi @ 68°F (60 bar @ 20°C)
• Class 300 malleable or Ductile Iron
acceptable up to 3”
• 1,000 lb. Ductile or Forged Steel required
above 3”
• Class 600 Flanged acceptable for all pipe
sizes
• Class 150 Fittings are not acceptable
• Cast Iron Fittings are not acceptable
• Grooved Fittings MUST meet minimum
design pressure
• (*Not all grooved fittings are acceptable
for Fire Protection service. Check UL
listing for all grooved fittings)
END OF EQUIPMENT SECTION
ANY QUESTIONS?