Tools with the cutting edge

LarsLap
Model K
Suitable for safety and control valves
with flat and conical seats
Range: 8-150mm (1/4”-6”)
 Tools with the cutting edge

LarsLap – the optimal

grinding system
Repairing leaking valves in industrial pipelines is a laborious operation
involving extended downtime, production losses and substantial,
unwanted costs.

Losses are minimized if valves can be reground in situ, precluding the

need to dismantle and remove defective valves from the pipeline.

LarsLap Portable, industrial valve grinders with their patented design

concept are the proven solution for in-line valve reconditioning.

Available in overlapping sizes, LarsLap grinders combine

unsurpassed versatility with exceptional ease of handling and operation.

A combination guaranteed to give LarsLap grinders cutting edge

performance, whatever the valve location.

Welcome to the world of LarsLap

LarsLap model K
The best way to a perfect result

In-line grinding for fast results

LarsLap model K´s unique, handheld system is
easy assemble so you get started fast.

The design of the K makes it possible to use

different drive units to the same equipment.
 Tools with the cutting edge
Our precision gives you a perfect
result, every time

The grinding plates and cones on LarsLap model K are

made with such precision and with a high quality of the
material. The K will give you a perfect result every time
you use it, for a very long time.

Versatile
The Model FLH can easily be used to grind conical seats by using
our unique centering system. You can also choose from three
different driving units, pneumatic, electrical, battery or a combination
of all three and still be using the same drive shaft.

Large selection of options

Your LarsLap model K can be equipped with a Diamond lapping
large range of options like; drill adaptors, block for lapping
of plugs.
LarsLap LapBlocks and more. Fine and medium
course
Lapping without
use of any
lapping paste
makes it quick,
clean and easy

Complete with carrying case

Every LarsLap model K is supplied with a rugged, customized
carrying/storage case complete with accessories.
The case is fitted with specially designed compartments molded to the
shape of each component, allowing operators to confirm at glance that all
items are in place before and after grinding.

Unique flexibility
All LarsLap grinders are designed for operational compatibility. They can be driven by pneumatic or electric
powered motors. Equipment purchased initially for relatively small diameter ranges can be conveniently
upgraded to deal with larger ranges at a later date.
This unique degree of flexibility means that grinders can be readily adapted to suit a wide variety of customer
needs.

LarsLap Grinding paper

Get the most out of your machine by using LarsLap original grinding
paper. LarsLap grinding paper is tested, proved and perfectly fitted to
suit your machine under the conditions it will be working in. (from 24
grit to 3mic)
 Tools with the cutting edge

K AB K AB K B 100
K A 65 K A 100 K B 100 65/100 100/150
8-65mm 8-100mm 8-100mm
LapBlock
8-65/100mm 8-100/150mm
Larslap model K (1/4”-2 ½”) (1/4”-4”) (1/4”- 4”) (1/4”-2 ½”/4”) (1/4”-4”/6”)
8-100mm
A selection of standard models Globe, control Globe, control Globe, control (1/4”- 4”)
Globe, control Globe, control
and safety and safety and safety Globe, control,
Other configurations and accessories are and safety and safety
valves with valves with valves with flat safety valves
valves with flat valves with flat
available on request angled seats angled seats seats and wedges
and angled and angled
with flat seats
seats seats
Electric drive unit 110 or 220V option option option option option option
Electric drive unit battery operated 110 or
option option option option option option
220V
Pneumatic drive unit (6-7 bar) option option option option option option
K shaft I short • • • • • •
K shaft II long • • • • • •
Centralizing cone I • • • • • •
Centralizing cone II • • N/A • • N/A
Centralizing cone III • • N/A • • N/A
Ball joint adaptor and grinding plate for
N/A N/A • • • •
8mm
Support adaptor for grinding cones • • N/A • • N/A
Kit K 100 flat seat grinding plates for
N/A N/A • • N/A •
grinding seats 8-100mm (1/4” and 4”)
Kit K 150 flat seat grinding plates for
N/A N/A option N/A • option
grinding seats 8-150mm (1/4” and 6”)
Kit K 100 guiding plates 8-100mm (1/4”-4”) N/A N/A • • N/A •
Kit K 150 guiding plates 8-150mm (1/4”-6”) N/A N/A option N/A • option
Grinding cones 3° kit 65, 30°, 60°, 90° 8-
option N/A N/A option N/A N/A
65mm(1/4”-2 ½”) including guide plates
Grinding cones 5° kit 65, 30°, 40°, 60°,
75°, 90° 8-65mm(1/4”-2 ½”) including option N/A N/A option N/A N/A
guide plates
Grinding cones 3° kit 100, 30°, 60°, 90° 8-
N/A option N/A N/A option N/A
100mm(1/4”-4”) including guide plates
Grinding cones 5° kit 100, 30°, 40°, 60°,
75°, 90° 8-100mm(1/4”-4”) including N/A option N/A N/A option N/A
guide plates
2 LapBlock long life lapping plates in two
N/A N/A N/A N/A N/A •
different microns at your choise
Self adhesive grinding discs in rough
• • • • • •
medium and fine
Heavy duty case for transport and storage
• • • • • •
including tools to operate the K

K AB 100 Possible dimensions:

case: A Min = 8 mm
530x400x A Max = 150 mm
240mm
B Min = 18 mm
K AB 100 B Max = 170 mm
Total C Min = 80 mm
weight: C Max = 280 mm
20 kg D Min = 20 mm
(45 lb)
E= 30° (2x15°)
E= 40° (2x20°)
E= 60° (2x30°)
E= 75° (2x37,5°)
E= 90° (2x45°)

Developed and produced in

the country of SWEDEN