College of Agriculture, Baramati

Course No. : ENTO-232

Course Title: Insect Ecology and Integrated Pest Management

Course Credit: 2(1+1)

INSECT ECOLOGY
 The term ecology was coined by a German biologist Ernst Haeckel (1869).
 The term ecology is derived from the Greek word “oikos” means “house or
place to live” & “logous” means “the science of” or “the study of”.
 Thus literally ecology is the study of earth’s household comprising of the plants,
animals, microorganisms and people that live together as interdependent
components.

Definition of Ecology

 Ecology: - It is the science which deals with the study of relationship of

organisms with their environment including both biotic & abiotic factors.
 Insect Ecology: - The science which deals with the study of relationship of
insects to their environment.

Terminology Related to Ecology

 Auto ecology: - Study of an individual organism, its behavior and influence
of environment on its life cycle.
 Synecology: - Study of groups of organism which are found as unite called
community ecology.
 Habitat ecology: - Study of habitat and its effects on the organisms.
 Ethology: - Study of behavior of organisms under natural condition.
 Habitat: - It is the place where the organism lives.
 Population: - denotes groups of individuals of any kind of organism.
 Community: - in the ecological sense includes all the populations of a given area.
 Ecosystem: - A self-containing system they are composed of living organisms and the
nonliving environment where continuous exchange of matter and energy takes place.
 Biome: - The grouping of communities that have similar structure composed of
ecosystem of similar vegetation type.
 Biota: - Fauna and flora of a particular habitat are together called biota.
 Biosphere: - It is the largest ecosystem which includes all living organism on earth
interacting with physical environment.
 Ectone: - Some communities which are considered to be transitional between two
biomes called Ectone.
 Inquilines: - An animal lives in the habitat of another one with sharing its food.
 Phoresy: - A commensalistic relationship among the organisms in which one kind of
organism attacks to another thereby gains mode of transportation.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

ENVIRONMENT: ITS COMPONENTS

 The term environment entomologically means “Surroundings”. Environment is a
complex of living and non-living factors which surrounds on organisms.
 Environment: - An environment is anything which surrounding to individuals thatmay
influence its change to survive and multiply. 

Components (Factors) of environment:-

Following components of environment affect or influencing on insect population.
A) Abiotic Factors: (Physical/non-living /Density independent factor)
1.) Climatic factor :-
i) Temperature
ii) Rainfall
iii) Humidity (Moisture)
iv) Air current (Wind)
v) Light
vi) Atmospheric pressure
2.) Topographic factor: -
i) Mountains
ii) Sea, Ocean, River
iii) Soil
B) Biotic factors: (Living /Density dependent factor)
1.) Food (Nutritional factor)
2.) Competition (Interspecific & Intraspecific Competition)
3.) Natural enemies (Predators, Parasite & Pathogen)
Abiotic Factors (Density independent factors)
Temperature
 Insects are the cold blooded animals; they do not have mechanism to regulate
body temperature called poikilothermic.
 Insects survive at specific optimum temperature - Upper lethal limit i s 40-
50oC (even up to 60oC survival in some stored product insects) & Lower
lethal limit - Below freezing point e.g. snow fleas.
 At low temperature (winter) insect takes more days to complete a stage
(larval or pupal stage) Larva, pupa commonly undergoes hibernation in
winter.
 At high temperature (summer) it takes less than to complete a stage. Eggs
undergo aestivation in summer.
 Temperature effects on fecundity, migration & rate of development of insects.
 E.g. i) Grasshopper lays 20-30 times more eggs at 32oC compared to 22oC,
 ii) Oviposition of bed bug inhibited at 8-10oC, iii) Thrips give few eggs at 8°c
& more at 20-30°c, iv) Larval period of sugarcane internode borer is very
short in summer & prolonged in winter & v) Swarm migration of locust
occurs at 17-20oC.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

Rainfall
 Heavy rainfall has adverse effect on small insects like aphids, Jassids, thrips,
white fly, mealy bugs, diamond back moth (DBM) and scale insects etc.
which are washed out from plants & killed in flooded soil.
 Rainfall also effect on the abundance of insects.
 Rainfall is essential for adult emergence of cutworms and RHC.

Humidity / (Moisture)
 It is essential for physiological activities like metabolic reactions and
transportation of salts in insects.
 Insect get die when water content increases or decreases termed as lethal
wetness or lethal dryness. Moisture scarcity leads to dehydration and death of
insects.
 High humidity causes development / Encourages of disease causing pathogens
on insects (fungi). e. g. White halo fungus Verticillium lecanii on coffee
green scale requires high RH for multiplication and spread, Termites prefer
high humidity 90-95% RH
 Humidity also effect on fecundity & normal development of insects.
 E.g. Locust does not lay eggs if there is no sufficient moisture. It mature
quicker & give more eggs at 70% relative humidity, Low RH in rainfed
groundnut crop induces leaf mines incidence.

Air current (Wind)

 The disposal of insects to great extent depends upon wind.
 It interferes with feeding, mating & oviposition of insects.
 Many insects fly with the air current & get transfer from one place to
other. Many of them die by falling in rivers or sea. Many insects are
known to spread in new countries through air currents.
 Large number of aphids has been found after a strong wind & many of them
are destroyed by falling in the sea & rivers etc.
 Thus air current also play an important role in natural control of insects.

Light
 Light plays an important role in growth, development & survival because it is
prime source of energy in all organisms.
 Light control locomotive activities of insects by direct action this phenomenon
is called as Phytokinesis. The movement of animal in response to light called
phototaxis. The response of organism towards the length of day light called as
Photoperiodism.
 Photo period influences induction of diapause (a resting stage) in most of
the insects E . g . Short day species- mulberry silk moth & Long Day Species-
Pink bollworm.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 Some insects are active in night (Nocturnal), Some are active during the day
(diurnal) & Some active during dawn and dusk (Crepuscular).
 In many insects oviposition is stimulated by exposure to light or darkness. E.g.
Fruit flies lays eggs in light, Lepidopterans like cotton bollworm, Red hairy
caterpillar (RHC) oviposit in dark.

Atmospheric pressure
 The insects are more affected in low atmospheric pressure than in high
atmospheric pressure.
 The phototrophic insects are more active during periods of high atmospheric
pressure.
 The activities of some insects are directly influenced by pressure. E.g. due to
the low atmospheric pressure a chances of rain increased resulting the
emergence of ants.

Topographic factors
 Major topographic factors like mountain, rivers, sea are act as physical barriers
to the spread of insects.
 Lake & ponds affect the nature of insects of that region.
 Water current - Larva of mosquitoes & beetles are able to live only in
standing water & running water is preferred by Dragonfly and Caddis flies.
 Soil type - Wire worm, multiplies in heavy clay soil with poor drainage
whereas termites, white grubs & cut worm prefer light, loamy soil.

Biotic Factors (Density dependent factors)

Food (Nutritional factor)
 Insects are heterotrophic hence they cannot synthesize their own food they
depend on plants for food.
 The quantity and quality of food/nutrition plays important role in
survival, longevity, distribution, reproduction and speed of development
 Quantity of food - Short supply of food causes intraspecific and
interspecific competition.
 Quantity of food - This depends on nutritional availability of plants. Crop
varieties/species differ in nutritional status which affects insects.

Competition
 Insect species are likely to be competing with one another or with
members of another species for limited resources like food, mates, suitable
site for oviposition or pupation. Such competition operates whenever the
population is increasing and the resources are limited.
 a) Intraspecific competition: When members of population of the same
species compete for resources. Examples are as follows;

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 i) Cannibalism in American bollworm larvae,

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

ii) Cannibalism in later stage grubs of Chrysopid,

iii) Crowding in aphids result in alate (winged) form for migration,
iv)) Reduction in fecundity (egg laying) in rice weevil during overcrowding.
v) Crowding in honeybees leads to swarming.
 b) Interspecific competition: This is the competition occurring between
members of two or more species. Two or more competing species with
identical requirements cannot coexist in a same place for a long time. The
elimination of one species by another as a result of interspecific
competition. It gives by Russian scientist G. F. Gause called competitive
exclusion principle or Gause’s hypothesis / principle.
 E.g. i) Accidental introduction of oriental fruit fly into Hawaii eliminated by
Mediterranean fruit fly & ii) Trichogramma & Crysoperla compete for
Helicoverpa eggs in cotton.
 Cannibalism: - It is the phenomenon where the insects feed on the
individuals of the same species when crowding is occurring.
 Colonization: - Grouping of free living individuals to form colonies to
have better protection from natural enemies or environmental
conditions for improved utilization of food.
 Aggregation: - Tendency of congregating in large numbers than
normal distribution for mating, food etc.

Natural enemies
Every insect has a number of natural enemies in the nature viz; parasitic insects, predatory
insects, mites, spider, birds, mammals, reptiles, fishes & diseases causing fungi, bacteria
& viruses. They keep the insect population in check and thus natural balance within limits
is almost always maintained.
 Predators: Predators are free living organisms that feed on l i v i n g insects
& consume more than one individual during their lifespan. Major insect
predators are as follows;
 Lady bird beetle (Coccinellids) - Feed on aphids & leaf hoppers.
 Green lace wing (Chrysoperla spp.) - Feed on aphids & other
sucking pests.
 Mantid, Dragon fly & Syrphid fly - Feed on different insects.
 Parasitoid: An insect parasite of an arthropod that is parasitic in its
immature stage killing the host in the process of development and adults
are free living. Major insect parasitoids are as follows;
 Trichogramma spp. - Feed on Sugarcane borers & Coton
bollworms.
 Apanteles flavips - Feed on lepidopteran larvae.
 Epiricania meloneuca - Feed on sugarcane pyrilla.
 Capidosoma koeheleri & Chilonus blackberni - Feed on potato
tuber moth.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 Parasites: Parasites are organisms which live on other organisms for getting
food & shelter. The association of parasite and host known as parasitism. A
parasite weakens or kills the host while feeding requires only one part of one
host to reach maturity. E.g. ticks, mites, Protozoa, Nematodes and other
arthropods.
 Pathogens: Disease causing microorganisms called as pathogens. Certain
fungi bacteria & viruses cause disease in many insects & reduce their
population in nature. The important microorganisms which cause disease in
insects are as follows;
 Fungi - E.g. Verticillium lecanii (White halo fungus) cause disease
in mealybugs & aphids, Beaveria bassiana (White muscardine
fungus) cause disease in lepidopteran larvae & Metarhizium
anisopliae (Green muscardine fungus) in coconut rhinoceros beetle.
 Bacteria - E.g. Bacillus thuringiensis effective against
lepidopteran larvae & Bacillus popilliae attacking on beetles.
 Virus - E.g. HaNPV (Helicoverpa armigera nuclear polyhedrosis
viruses) against American bollworm. & SlNPV - (Spodoptera litura
nuclear polyhedrosis viruses) against tobacco leaf eating caterpillar.
 Other Natural Enemies: Frog, Toad, reptiles, birds, rats, bears, snakes & lizard
Environmental Resistance & Pest Outbreaks
 Agroecosystem - Any ecosystem largely created and maintained to satisfy a
human want or need.
o It is not a natural ecosystem but is man-made.
o Agroecosystem is the basic unit of pest management - a branch of
applied ecology.
o A typical agroecosystem is composed of;
i) More or less uniform crop-plant population
ii) Weed communities
iii) Animal communities (including insects)
iv) Macrobiotic communities
v) and the physical environment the react with.

Balance of Nature -
 Definition - “The maintenance of more or less fluctuating population density of a
given organism over a period of time with in certain definable upper and lower
limits by action of abiotic and biotic factors”. Or a tendency of population
density of all species in a same area to maintain a constant number of individuals
in the physical environment.
 The concept of Balance of Nature was given by Smith in1935.
 In unmanaged ecosystems, a state of balance exists or will be reached, that is
species interact with each other and with their physical environment in such a

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

way that on average, individuals are able only to replace themselves. Each
species in the community achieves a certain status that becomes fixed for a
period of time and is resistant to change which is termed as the balance of
nature.
 When man begins to manage c re a t i n g new ecosyst em ( agroecosystem)
where natural ecosystem existed previously, the balance is altered. The
exceptionally strong forces react in opposition to our imposed change toward a
return to the original system (e.g. outbreak of a pest is one of the forces). So,
insect pests are not ecological aberrations. Their activities counter wants and
needs of human populations. 2.)
Environmental resistance - It is the physical and biological r est r aint s
t hat prevent a species from realizing its Biotic potential.

 Environmental resistance may be of 2 types.

1. Biotic factors - includes
a) Competition (interspecific and intraspecific)
b) Natural enemies (predators, parasites and pathogens)
2. Abiotic factors -Temperature, Light, Moisture & water.
Causes of pests outbreaks in agro-ecosystem

Pest outbreaks: - The phenomenon of sudden increases in pest population due to the effect
of different biotic & abiotic factors.

 Activity of human beings which upsets the biotic balance of ecosystem is the
prime cause for pest outbreak.
 The following are some human interventions - Reason for outbreak

1.) Bringing forest area under cultivation or destruction of

forest. 2.) Destruction of natural enemies of pests.
3.) Intensive and Extensive cultivation.
4.) Introduction of new varieties and
crops. 5.) Improved agronomic practices.
6.) Introduction of new pest in new area or environment.
7.) Accidental introduction of pests from foreign countries (through air/sea
ports) 8.) Large scale storage of food grains
9.) Lack of adopting IPM
strategies.
10.) Resurgence of sucking pests.

Bringing forest area under cultivation or destruction of forest.

 The insects feeding on the forest trees & plants in the forest are driven to
neighboring areas where they may infest the cultivated crops and become
new pests.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Destruction of natural enemies of pests.

 Due to excess use of insecticides, natural enemies are killed. This affects
the natural control mechanism and pest outbreak occurs, e.g. Synthetic
parathyroid insecticides kill natural enemies.
Intensive and Extensive cultivation.
 Monoculture (Intensive) leads to multiplication of pests. Extensive
cultivation of susceptible variety in large area - No competition for food
multiplication increases e.g. Stem borers in rice and sugarcane.
Introduction of new varieties (Strain) and crops.
 New plant may serve as new host for some of the insect species. Mostly
improved strains of crop plants are susceptible to pests whereas character near
to their wild parents is resistant to pest attack.
 Varieties w i t h favorable p h ys i o l o g i c a l a n d morphological
f a c t o r s cause multiplication of insects.
 E.g. Succulent, dwarf rice varieties favors to leaf folder, Cambodia cotton
favors stem weevil and spotted bollworm & Hybrid sorghum (CSH 1, HB1)
favors shoot flies and gall midges.
Improved agronomic practices.
 Application of more nitrogenous fertilizers leads to crop growth which
increase stem borer incidence in rice & sucking pests in cotton.
 Closer planting in rice increase incidence of brown plant hoppers & leaf
folder.

Introduction of new pest in new environment.

 Pest multiplies due to absence of natural enemies in new area. E.g.
Apple wooly aphid multiplied fast due to absence of Aphelinus mali
(Parasite) in Nilgiri hills.
Accidental introduction of pests from foreign countries.
 Diamondback moth on cruciferous crops, Potato tuber moth on potato,
Cottony cushion scale on wattle tree, Wooly aphid on apple, Psyllid on
subabul & Spiralling whitefly on most of horticultural crops.
Large scale storage of food grains.
 Serve as reservoir for stored grain pests & Rats found in underground
drainage.
Resurgence of sucking pests.
 Definition: - Tremendous increase in pest population brought about by
insecticides despite good initial reduction in pest population at the time
of treatment called resurgence.
 Deltamethrin, Quinalphos & Phorate cause resurgence of BPH in rice,
Synthetic pyrethroids cause resurgence of Whitefly in cotton &
Carbofuran cause resurgence of Leaf folder in rice.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Pest surveillance and pest forecasting

 Pest Monitoring - It is the estimation of changes in insect distribution and
abundance, information about insects & life history, influence of biotic & abiotic
factors on pest population.
 Pest Surveillance - It refers to the constant watch on the population dynamics of
pests, its incidence and damage on each crop at fixed intervals to forewarn the
farmers to take up timely crop protection measures.
 There are three basic components of pests surveillance;
i.) Determination of the level of incidence of the pest
species, ii.) Determination of the loss caused by the
incidence &
iii.) Determination of the economic benefits, the control will provide.
 Objective of pests surveillance
1.) To know the existing and new species of pests.
2.) To assess the pest population and damage at different growth stage of crop. 3.)
To study the different weather parameters on pests.
4.) To study changing pest status (Major & minor).
5.) To assess natural enemies and their influence on pests.
6.) To study effect of new cropping pattern and varieties on pest.

 Pest forecasting - Forecasting of pest incidence or outbreak based on

information obtained from pest surveillance.
 Uses of pest forecasting -
i.) Predicting pest outbreak which needs control measure.
ii.) To know the suitable stage at which control measure gives
maximum protection.
 Types of pest forecasting -
1.) Short term forecasting- one or two crop seasons.
2.) Long term forecasting- cover large areas & based on weather conditions.
 Pest forecasting comprises following three main points: -
 Quantitative measurement of population of pest on ecological zones.
 Study of life history of the insect pest.
 Study of fluctuation in pest population due to natural enemies & other factors.
Survey: - Conducted to study the abundance of a pest species.
Types of survey- 1.) Roving
survey
2.) Fixed plot survey

 Roving survey
o Assessment of pest population/damage fromrandomly selected spots
representing larger area
o Large area surveyed in short period
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

o Provides information on pest level over large area

 Fixed plot survey
o Assessment of pest population/damage from a fixed plot selected in a
field.
o The data on pest population/damage recorded periodic from sowing till
harvest.
o Qualitative survey - Useful for detection of pests.
o Quantitative survey - Useful for enumeration of pest.
CATEGORIES OF PESTS
 Pest- Derived from French word ‘Peste’ and Latin term ‘Pestis’ meaning
plague or contagious disease.
 Pests include insects, nematodes, mites, snails, slugs, etc. and vertebrates like
rats, birds, etc.
 Depending upon the importance, pests may be agricultural forest, household,
medical, aesthetic and veterinary pests.
 Definition - Pest is any animal, pathogen, insects which cause damage to man, his
animals & crops. Or Pest is any animal which is noxious, destructive or
troublesome to man or his interests.
 Economic Pest: - The pest which causes more than five percent economic yield loss.
 CATEGORIES OF PESTS
A.) According to frequency of occurrence: -
1.) Regular pest: Certain pests occur most frequently on crop form c lose
association with particular crops. E. g. Gram pod borer, Thrips on chilies, Aphids
on cotton, soot & fruit borer on Brinjal & bhendi & Epilachna beetle on Brinjal.
2.) Occasional pest: Certain pests occur rather infrequently on crop & there is no
c lose association with particular crops. E. g. Caseworm on rice, Mango stem
borer.
3.) Seasonal pest: Occurs during a particular season every year. E. g.
Grasshoppers on safflower in kharif, Red hairy caterpillar on groundnut in kharif,
Whit e grub
4.) Persistent pests: Occurs on the crop throughout the year and is difficult to
control. E. g. Chilli thrips, mealy bug on guava
5.) Sporadic pests: Pest which occurs in few isolated localities during some
period. E. g. Coconut slug caterpillar, Rice ear head bug.
B.) According to intensity of pest or Based on level of infestation : -
1.) Epidemic: Sudden outbreak of a pest in a severe form in a region at a
particular time. E. g. Brown plant hopper in Tanjore, Red hairy caterpillar in
Madurai,
2.) Endemic: Occurrence of the pest in a low level, regularly and
confined to particular area. E.g. Rice gall midge in Madurai, White grubs
on sugarcane in Kolhapur district, Groundnut in sangali, Rice stem borer in
Raigad district.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

C.) According to losses caused by pest or According To EIL, GEP And DB: -
1.) Negligible: If the insect causes less than 5% yield loss.
2.) Minor pest: If the insect causes 5-10% yield loss. E.g. Rice hispa, Ash weevils.
3.) Major pest: If the insect cause more than 10% yields loss. E.g. Cotton
jassid, Rice stem borer.
4.) Key pest: Most severe and damaging pests & GEP lies above EIL
always hence the environment must be changed to bring GEP below EIL.
E.g. Cotton bollworm, Diamond back moth.
D.) ‘r’ pest: small size insects having strong dispersal & more host finding ability

Host Plant Resistance

 Definition: - The ability of some varieties to produce good quality yield than ordinary
varieties at the same level of insect population.
 R.H. Painter (1968): He defined as relative amount of heritable quality possessed by
a plant which influences the ultimate degree of damage done by the insect.
 He also referred as a Father of HPR.
 R.H. Painter (1936, 1941) classified the mechanisms of resistance into (i) Non
preference (ii) Antibiosis (iii) Tolerance.

Mechanism of Insect Resistance: -

 Antixenosis (Non-preference): - It results from some morphological characters like-
i) Absence of attractant, ii) Presence of repellent and allelochemic / morphological
characters. It is used to denote the group of plant characters and insect responses that
keep away an insect from using a particular plant (or) variety, for oviposition, food
(or) shelter (or) combination of the three (Painter, 1951). It is proposed by Kogan and
Ortman (1978). Morphological characters include plant character such as (1)
trichomes, (2) surface waxes, (3) hardiness of plant tissues, (4) thickening of cell
walls and (5) cuticle, (6) rapid proliferation of tissues, (7) colour, and shape etc. E.g.
Trichomes in cotton - resistant to whitefly, Wax bloom on carucifer leaves - deter
feeding by DBM Plant, shape and colour also play a role in non-preference, Open
panicle of sorghum - Supports less Helicoverpa.

 Antibiosis: - Adverse effect of host plant on the biology of insects. This is due to the
presence of toxic metabolites - alkaloids, glucosides, anions Absence / insufficiency
of essential nutrients unbalanced proportion of nutrients Presence of antimetabolites
that renders some essential nutrients unavailable to insect. Presence of enzymes
inhibits normal process of food digestion and consequently utilization of nutrients.
Salicylic acid Rice stem borer
Gossypol (Polyphenol) Helicoverpa armigera (American
bollworm)
Sinigrin Aphids, Myzus persicae
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

Cucurbitacin Cucurbit fruit flies

DIMBOA (Dihydroxy methyl Against European corn borer, Ostrinia
benzoxazin) nubilalis

 Tolerance: - ability of host plant to withstand and give good quality yield even if the
sufficient infestation of insects are observed. Tolerance has no adverse effect on the
insects. Known component of this form of resistance includes. i) General vigour of
plant, ii) Compensatory plant growth in individual plant / population, iii) Wound
healing, iv) Mechanical supports in tissue and organs v) Changes in photosynthate
partitioning.
 Avoidance or Escape: - Escape of a variety from insect attack either due to earliness
or its cultivation in the season where insect population is very low.
 Major gene resistance: Controlled by one or few major genes (vertical resistance).

 Minor gene resistance: Controlled by many minor genes. The cumulative effect of
minor genes is called adult resistance or mature resistance or field resistance. Also
called horizontal resistance.

 Advantages of HPR as a component in IPM

 Specificity: Specific to the target pest. Natural enemies unaffected
 Cumulative effect: Lasts for many successive generations
 Eco-friendly: No pollution. No effect on man and animals
 Easily adoptable: High yielding insect resistant variety easily accepted
and adopted by farmers.
 Less cost.
 Effectiveness: Res. variety increases efficacy of insecticides and natural
enemies
 Compatibility: HPR can be combined with all other components of IPM
 Decreased pesticide application: Resistant varieties require less frequent
and low doses of insecticide.
 Persistence: Some varieties have durable resistance for long periods

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

INTEGRATED PEST MANAGEMENT (IPM)

 History of IPM: -
 Michel bacher and Bacon (1952) coined the term “integrated control”.
 Stern et al. (1959) defined integrated control as “applied pest
control which combines and integrates biological and chemical control”
 The idea of managing pest population was proposed by Geiger and Clark
(1961) who called this concept as “protective population management”.
 Geier (1966) coined the term “pest management”.
 Council on Environmental Quality (CEQ, 1972) gave the term
“Integrated Pest Management”
 IPM Working Group (IPMWG-1990) was constituted to strengthen
implementation of IPM at international level.
 In 1997, Smith and Adkisson were awarded the World Food Prize for
pioneering work on implementation of IPM.
 NCIPM: National Centre for Integrated Pest Management at Faridabad
(Near Delhi) (1988).
 In 1967 a broader definition was adopted by FAO (Food Agricultural
Organization, Italy- Rome) Panel of experts as -
Definition: - ‘It is the pest management system in context of associated environment and
population dynamics of pest species utilize all the suitable techniques and methods in as
compatible manner as possible and maintains pest populations at level below those
causing economic injury.’
 Need for Pest Management -
1. Development of resistance in insects against insecticides e.g. OP and
synthetic pyrethroid resistance in Helicoverpa armigera.
2. Outbreak of secondary pest e.g. Whiteflies e m e r g e d as ma jor p e s t when
spraying insecticide against H. armigera.
3. Resurgence of target pest e.g. BPH of rice increased when some OP
chemicals are applied.
4. When number of application increases, profit decreases.
5. Environmental contamination and reduction in its quality.
6. Killing of non-target animals and natural enemies.
7. Human and animal health hazards.
 Objectives of pest management
1. To reduce pest status below economic injury level. Complete elimination of
pest is not the objective.
2. To manage insects by not only killing them but by preventing feeding,
multiplication and dispersal.
3. To use ecofriendly methods, which will maintain quality of environment
(air, water, wild life and plant life)
4. To make maximum use of natural mortality factors, apply control measures

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

only when needed.

5. To use component in sustainable crop production.
 Principles of Pest Control:
1. Identification/Monitoring insect pests and natural enemies of pest.
2. Insect classification and life history.
3. Understanding the pest population dynamics & Concepts of injury levels.
4. Understanding the agro-ecosystem.
5. Knowledge of introduced pest.
6. Economics of the pest control.
7. Consumers pressure.
8. Preventive control.
9. Knowledge of various pest control methods/Integration of pest control tactics.
10. Extension Education.
 Advantages/Importance/Significance of IPM :-
1) It minimizes residue & toxic hazards.
2) It helps to minimize the development of pesticide resistance in the pest.
3) It gives scope to biological control & bio-agents.
4) It is easy to adopt.
5) It is cheaper & most efficient way of utilizing chemical insecticides.
6) It is ecologically beneficial to both human & animals.
7) Export of agricultural commodities.
 Limitations/Disadvantages of IPM: -
1) Lack of planning in national economic planning.
2) Lack of IPM information to the farmers.
3) Pesticide industries create a situation that chemicals give effective control of pest

Tools/Methods of IPM
 Preventive methods of IPM include the following
a. Natural enemies
b. Host plant resistance
c. Legal control (Plant Quarantine)
d. Cultural control
 Curative methods of IPM include the following
a. Physical methods
b. Mechanical methods
c. Chemical methods
d. Biological methods
e. Insect Growth Regulator (IGR)

 Preventive methods can be used, irrespective of the level of pest incidence. It can
be followed as a routine, even if the pest is at a low level.
 Curative methods have to be followed only when the pest attains
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

economic threshold level (ETL).

Different Methods of Pest Control

Natural Control Artificial Control

(Applied control/ Tools of IPM)

Abiotic factors Biotic factors

(Density independent) (Density dependent)

(1. Food 2. Shelter 3. Natural Enemies)

Climatic Topographical

1)Mountains 2)Soil properties 3) Ocean (Water resources) 4) Deserts

1) Temp 2) Humidity 3) Rainfall/ Moisture 4) Air 5) Sunlight etc

1. Cultural control
2. Mechanical control
3. Physical control
4. Biological Control
5. Legal Control
6. Chemical Control

Recent trends in pest control

1. Ionizing /radiation 2. Chemosterilants 3. Pheromones 4. Genetic manipulation 5. Insect attractants / Repellants

A) CULTURAL CONTROL/METHODS: -
 Definition: Regular farm operations, so performed as to destroy the insects or
prevent them from causing injury. Cultivation practices employed in a manner that
makes the environment less suitable for growth & reproduction of the insects.
1) Tillage operations – Ploughing & other tillage operations expose the insects to
upper soil surface which are picked by birds or destroyed by heat. e.g. Bihar
hairy caterpillar, fruit fly, gram pod borer. It also helps in removal of weeds
which may serve as host for insects.
2) Crop rotation – Practice the crop rotation in such a manner which will break the
continuous supply of food to the major pests of that crop. Growing of non-host
crop reduces the pest attack on crop. Okra followed by cotton increases the pest
attack.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

3) Trap cropping – The trap crops are those crops which are used to control the
pest of main crop. Trap crop plants are harvested early or used as a fodder. Okra
is good trap crop for cotton to attract Jassids & spotted bollworms.
4) Sanitation of field – removal & destruction of all undesirable plants, plant
debris, weeds & clean cultivation of field. Insects use the plant residues, weeds
as a host & increase the pest attack in next season. e.g. sugarcane borer, Jowar
stem borer, etc.
5) Time of sowing/planting – By adjusting time of sowing infection of some pests
can be prevented. If egg laying period of a pest is avoid; young plants can be
establish before the attack starts. e.g. Early sowing of kharif Jowar to escape
from attack of Jowar shoot fly.
6) Use of resistant varieties – some morphological or genetic factors associated
with the variety make the variety resistant for some pests. e.g. Deshi cotton is
more resistant to Jassids whitefly & bollworms than American cotton.
7) Other cultural methods – management of seed rate, pruning, clipping of tips in
rice, earthing-up & flooding like cultural practices help to control the pest
incidence on the crop. E.g. flooding rice nurseries to eliminate attack of
armyworms. Clipping of rice tips at the time of transplanting to eliminate egg
masses of stem borer.
Merits: -
i) It not increase the production cost.
ii) Environmentally safe.
iii) It is well-matched with other methods of pest control.
iv) It gives least chance of insect development.
Demerits: -
i) Knowledge of ecology & biology is essential.
ii) The control measures should be taken well in advance.
iii) It should be supplemented with other methods.
B) MECHANICAL CONTROL/METHODS: -
Definition: The method with which insect population is directly beat by
mechanical devices or manual operations.
1) Hand picking & destruction: - Insects are picked out & destroyed from the
crops. This method is applied when the insects are in large number & easily
accessible to picker.
i) By use of hand nets – e.g. butterflies, moths, grasshoppers, etc.
ii) By use of iron hook – e.g. rhinoceros beetles from coconut.
iii) Beating with brooms – e.g. locust
iv) Shaking of plants – Shaking of babul& neem to collect adult beetles of white
grub.
v) Sieving and winnowing – used for insects pest of stored grains. E.g. grubs of
khapra beetle.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

vi) Rope dragging – Passing of rope across the rice crop to dislodge caseworms over
the standing water which then drained out to collect the pests at corner of field.
2) Mechanical exclusion or provision of preventive barriers: - Use of devices by
which insects is physically prevented from reaching the crop or the produce.
i) Collar around the plants – Paper & tin collars around potato & tobacco to protect
from cutworms.
ii) Tin bands – fixed over coconut to prevent damage by the rats.
iii) Sticky bands – oily bands around mango tree to prevent upward movement of
mealy bugs.
iv) Trenches around fields – migration of rice armyworms prevented by digging
60×60cm trenches.
v) Bagging of fruits – fruit is covered by bags to protect from fruit sucking moth.
vi) Use of ant pans – use of four leg rack in vessels containing water to prevent from
ants.
vii) Screening of houses – screening the windows, doors, etc. to prevent from
mosquitoes.
viii) Bird scarer – device used to scare away the birds by explosive sounds called
bird scarer.
3) Use of Mechanical Devices: -Various traps are used for collecting & killing of
insects.
i) Light traps – Light is used to attract the insects. e.g. moths, beetles etc.
ii) Air suction traps – the traps are fixed in godowns against stored grain pests.
iii) Electric trap – live metal screen on which birds & insects are electrocuted.
iv) Use of flame thrower – burning of locust adults or hoppers with the help of
flame.
Merits: -
i) Insect population is directly hit by mechanical devices or manual operations.
ii) Environmentally safe.
iii) Highly special equipments not required.
iv) They are economically good & generally popular.
v) It is more useful in highly pest populated areas.
Demerits: -
i) It requires more time to get result i.e. it is time consuming method.
ii) These methods are ineffective on large areas & cannot be apply commercially.

C) PHYSICAL CONTROL/METHODS: -
Definition: Use of the physical forces or factors of environment for the
eradication of insects.
1) Application of Heat – Heating of the empty godowns above 50°c kills the
hibernating stored grain pests. Exposing infested grains to the sun in summer also
kills stored grain pests. Flame thrower is used to control the locust.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

2) Application of cold – refrigeration at 5-10°c of edibles including dry fruits will

kill the insect. Many insects fail to multiply below 10°c. Potato is stored at low
temperature.
3) Manipulation of moisture – By draining away the stagnant water mosquito’s
reproduction stops. Reducing the moisture content of grains below 8% can save
from most of the insects.
4) Radio activity – High frequency radio waves generate about 80°c temperature in
grains to kill weevils. Male insect can make sterile by gamma radiation.
5) Manipulation of soil – Steam sterilization of soil is done to kill soil insects and
nematodes.
6) Sound – Exposure of insects to ultrasonic waves of 100 kilocycles for 4-30
minutes at 500 watts has been found to be lethal to most of insects.

Merits: -
i) It gives immediate results.
ii) These methods are generally popular & believable to farmers.
iii) Insects are killed by physical action hence environmentally safe.
Demerits: -
i) These methods are time consuming & costly.
ii) These methods are useful only when much more damage has done.
iii) Special equipment are required for heating & refrigeration.

BIOLOGICAL METHOD
 Definition: Destruction, regulation or suppression of undesirable insects, other
animals or plants by introduction, encouragement or artificial increase of their natural
enemies.
 Paul Debach (1973) - The study and utilization of parasitoids, predators and
pathogens for the regulation of pest population densities.
 Predators: Predators are free living organisms that feed on living insects &
consume more than one individual during their lifespan. They attack on prey
at larval & adult stage. E. g. Lady Bird beetle, Green lace wing, Mantid,
Dragon fly, Syrphid fly etc.
 Parasitoid: An insect parasite of an arthropod that is parasitic in its immature
stages killing the host in the process of development and adults are free living.
E. g. Trichogramma spp., Apanteles flavips, Epiricania meloneuca,
Capidosoma koeheleri, Chilonus blackberni, Braconid wasps etc.
 Parasites: Parasites are organisms which live on other organisms for getting
food & shelter. The association of parasite and host known as parasitism. A
parasite weakens or kills the host while feeding requires only one part of one
host to reach maturity. E.g. ticks, lice, Bed bugs, Protozoa, Nematodes,
Mosquitos etc.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Differentiating points –
Sr.
Properties True Parasite Parasitoids Predator
No.
1 Size Smaller than host Same as that of host Larger than host
Only larvae adults are free living Larvae and
2 Feeding stages Larvae and adults
(Feed on nectar of flowers ) adults
No. of host
3 One one More than one
needed
Injury to the Feed without
4 Paralyze to oviposit and kill Kill to devour
host killing
Functions at low Functions at
Functions at low host density, so
5 Activity host density, so higher host
efficient
efficient density
6 Host specificity Great Great Not so great
Suitability for
7 biological Not suited Best suited Suited
control
E. g. Lady Bird
ticks, lice, Bed Trichogramma spp., Apanteles beetle, Green
bugs, Protozoa, flavips, Epiricania meloneuca, lace wing,
8 Examples
Nematodes, Capidosoma koeheleri, Chilonus Mantid, Dragon
Mosquitos etc. blackberni, Braconid wasps etc. fly, Syrphid fly
etc.

History of biological control

 The term biocontrol first time used by H. S. Smith in 1919. He is also referred as
father of biocontrol. Paul Debach (1973) - He is a pioneer worker in biocontrol.
 Ancient times - In China Pharoah’s ant was used to control stored grain pest.
Red ant also used to control foliage feeding caterpillar, 1762 - ‘Mynah’ bird
imported from India to Mauritius to control locust, 1770 - Bamboo runways
between citrus trees for ants to control caterpillar.

 November 1888 - First well planned and successful biological control

attempt made -
 In California (USA) Vedalia beetle (Rodolia cardinalis) introduce from Australia to
control of cottony cushion scale, pest of citrus, by the scientists Mr. C.V. Riley &
Mr. Albert Koeble. This is the first classical example of biological control.
 1898 - First introduction of natural enemy into India-
 1898 - A coccinellid beetle (Australian lady bird beetle), Cryptolaemus
montrouzieri was imported into India from Australia and released against
coffee green scale, Cocus viridis. Even today it is effective against mealybugs
in South India.
 1920 - A parasitoid Aphelinus mali introduced from England into India to
control Woolly aphid on Apple, Eriosoma lanigerum.
 1929-31 - Rodolia cardinalis (common names vedalia beetle or cardinal ladybird)
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

is a species of ladybird beetle that is sometimes described as endemic to Australia.

 imported into India (from USA) to control cottony cushion scale Icerya purchasi
on Wattle trees.
 Regional Station of Commonwealth Institute of Biological Control (CIBC)
established at Bangalore in 1957. Presently Project Directorate of Biological Control
(PDBC) Bangalore looks after Biocontrol in India. Recently it called as International
Center for Agricultural Important Insects in 2006.

 Characteristics of ideal parasites/Qualities of an effective natural enemy

 Adaptability: It should be Adapted to varied environmental condition & survive in
all habitats of pests.
 Host specific: It should be Monophagous and should be narrow host range.
 Fast multiplication: Multiply faster than the host Short life cycle with high fecundity
and high female: male ratio.
 High host searching capacity.
 Easy rearing and mass multiplication/culturing in laboratory.
 Disperse quickly in locality.
 It should be free from hyper parasites.
 It should not harmful to other beneficial species and plant species.
 It should withstand refrigeration.
 It should be small and tiny.

Types of parasites -
1) Primary parasites: - The parasites attack on crop pests.
2) Secondary parasites: - The insects which parasitize the primary parasites of pest
called secondary parasites.
3) Tertiary parasites: - The parasites attack on secondary parasites.
4) Hyperparasites: - All parasites that are parasite upon other parasites are collectively
called as Hyperparasites.
5) Super parasitism: - It is a type of parasitism where more individuals of the same
species are present in a single host they can complete their development in normal
way. E. g. Larva of pin sawfly carry tachinid fly.
6) Multiple parasitisms: - It is a type of parasitism where the host is attacked by two or
more species of parasitoids.
E.g. Ecto parasitoid - Feed externally e.g. Bracon brevicornis
Endo parasitoid - Feed internally e.g. Chelonus blackburni

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Methods/ Techniques in Biological Control:

 Three major techniques of biological control
1. Conservation and encouragement of indigenous natural enemies –
o It refers to avoid use of those pest control measures that destroy natural
enemies.
o It can be achieved by use of selective insecticides which do not kill the natural
enemies and development of resistant strains of parasite to pesticides. E. g.
Endogramma of Trichogramma spp. this is resistant to Endosulfan.
o Avoidance of those cultural practices which are harmful for natural enemies.
o Preservation of inactive stages of natural enemies.
2. Importation or Introduction –
o Natural enemies are introduced from other areas into a new locality (mainly to
control introduced pests)
o The organization which helpful for finding exotic predator like-
1) Commonwealth Institute of Biocontrol-Trinidad, West Indies
2) International Organization for Biocontrol of noxious animals and plants-
Zurich, Switzerland
3) International Center for Agricultural Important Insects- Bangalore, India
3. Augmentation –
o It includes activities designed to increase the numbers or effect of existing
natural enemies.
o Propagation (mass culturing) and release of NE to increase its population.
o It may be two types-
a. Inoculatve release: This type of release may be made as infrequently as
once a year or season to re-establish a species of natural enemies.
b. Inundative release: It involves mass culture and release of natural enemies
to suppress the pest population directly.

Natural enemies used in Biological control:

I] Insects:
a) Predaceous insects –
 Chrysoperla carnia (Green Lace Wing) feed on Aphids, Jassids, whitefly, etc.
 Cryptolaemus montrouzieri (Australian Ladybird beetle) feed on mealy bugs.
 Coccinella septumpunctata (Ladybird beetle) feed on aphids
 Syrphid fly - Feed on different insects.
 Vedalia beetle feed on cottony cushion scale.
 Dipha (Conobathra) aphidivora feed on sugarcane wooly aphids.
b) Parasitic insects - (Parasitoids)
 Egg Parasitoids - Trichogramma japonicum: parasite of stem borer of paddy.
Trichogramma chilonus - parasite of Cotton bollworms & sugarcane stem bores.
 Larval Parasitoid - Bracon kirkpatrickii & Apanteles angaleti parasite of cotton
bollworms.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 Egg-Larval Paranoids - Capidosoma koeheleri & Chilonus blackberni - parasite of

potato tuber moth.
 Nymphal & Adult Parasitoid - Epiricania meloneuca - parasite of sugarcane pyrilla.
Aphelinus mali - parasite of Apple wooly aphids.

II] Predatory vertebrates:

 Birds – Useful birds which destroyed crop pests includes king-crow & myna. Ducks
used in rice to control bug.
 Fishes – Destroy large number of mosquito larva.
 Frog – Destroy paddy stem borer.
 Toad & wall lizard – Live on insects such as termites‟ crickets, grasshoppers, bug,
etc.
 Snakes –feed on rats.
III] Nematode parasites:
 46 nematodes species, parasitizing various species of beetle, grasshoppers,
cockroaches, moths etc.
 Neoaplectana glaseri used for control of Japnese beetle.
 Nematodes especially rhabditids are found to have a symbiotic relationship with the
bacteria, forming disease complex. E.g. DD-136 Association beetween the nematode
Neoplanctana caprocapsi and bacterium Acromobacter nimatophilus against Codling
moth of apple.

IV] Pathogens:
 Certain microorganism able to causing diseases in insects which includes fungi,
bacteria, viruses, protozoa, rickettsia and nematodes.
 Microbial control: - It is a branch of biological control which deals with study and
utilization of microorganism for the suppression of pest population density.
 The Microbial control first time used by the E. A. Steinhause in 1949 referred as a
‘Father of Insect Pathology’ worked on Muscardine diseases of silkworm.
1) Fungi – The fungi which cause disease in insects called as Entomopathogenic fungi.
Adults are more affected than larvae to Entomopathogenic fungi. Fungi require high
atmospheric humidity to germinate. Fungi get entry through integument, via
respiration. Fungus gets entry with the help of aspersoria which is present on conidia.
They are usually attack on dipteran insects followed by Hemiptera, lepidopteran &
coleopteran. Besides Entomopathogenic fungi the other fungi is also attack on insects
like Entomophilic fungi (insect loving) and Entomophagous fungi (feed on insects)
E.g. Green muscardine fungus- Metarhizium anisopliae attack on coconut
rhinoceros beetle & sugarcane pyrilla, White muscardine fungus- Beaveria bassiana
against lepidopteran larvae, White halo fungus- Verticillium lecanii on coffee green
scale & Entomophthora grylli on grasshoppers.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

2) Bacteria –The bacteria cause disease in the insects when they infect through
ingestion.
a) Spore forming (Facultative, Crystelliferous) - They produce spores and also toxin
(endotoxin). The endotoxin paralyses gut when ingested by insects e.g. Bacillus
thuringiensis var. kurstaki effective against lepidopteran & it is stomach poison.
b) Commercial products - Delfin, Dipel, Thuricide
c) Spore-forming (Obligate) - e.g. Bacillus popilliae attacking on beetles cause
‘milky disease’. Commercial product - ‘Doom’ against ‘white grubs’
d) Non-spore forming - e.g. Serratia entomophila on grubs
3) Viruses –
a) There are six families of insect viruses. Among them baculoviridae is important
which includes the nuclear polyhedrosis & granulosis are most lethal & promising
viral insecticides which cause disease in Lepidoptera larvae. Insect viruses have
great potential for field because of their specificity & effectiveness against
important crop pests. Two types of viruses are common.
b) NPV (Nucleo polyhedrosis viruses) - e.g. HaNPV (Helicoverpa armigera nuclear
polyhedrosis viruses) against American bollworm, SlNPV (Spodoptera litura
nuclear polyhedrosis viruses) against tobacco leaf eating caterpillar.
c) GV (Granulovirus viruses) -e.g. CiGV (Chillo infuscatellus Granulovirus viruses)
4) Protozoa –
The role of protozoa as microbial agents in artificial control is limited because of difficulties
in their mass multiplication for field release. E.g. Nosema bombycis on silkworm and
Perezia pyraustae on Eropian corn borer.
5) Biological control of weeds
 Lantana camara (Ghanery) control by Lantana seed fly Agromyza lantinae.
 Maxican beetle, Zygogramma bicolorata effective against parthenium.
 Leaf eating weevils, Neochetina spp. feed on water hyacinth.
Advantages of biological control: -
i) Complete control over large area is possible.
ii) Co-operative efforts of farmers of a locality are not necessary.
iii) It is cheap method as it useful to long time.
iv) Biological agents will survive as long as the pest is survive.
v) It is environmentally safe.
vi) There is no pest resistance problem.
Demerits biological control: -
i) It is slow process & takes long time.
ii) Not suitable where immediate control required.
iii) Effectiveness depends upon climate.
iv) Multiplication on large scale is difficult i.e. storage not possible.
v) The work cannot be restricted at a particular area.
vi) If alternate hosts are present it may not give desired effect.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

vii) Work of biological agents may affect due to the Hyperparasites.

LEGAL METHODS
 Definition: It is defined as way of controlling pests by imposing various legal
restrictions in order to prevent the entry of foreign pest or to prevent the spread of
pests within country.
Pests Accidentally Introduced into India (Exotic pests)
1. Pink bollworm - Pectinophora gossypiella
2. Cotton cushion scale - Icerya purchasi
3. Wooly aphid of apple - Aphelinus mali
4. San Jose scale - Quadraspidiotus perniciosus
5. Potato tuber moth - Gnorimoschima operculella
6. Cyst (Golden) nematode of potato - Globodera sp.
7. Giant african snail - Acatina fullica
8. Subabul psyllid - Heteropsylla cubana
9. Spinalling whitefly - Aleyrodicus dispersus
Foreign Pests from Which India is Free- 1. Mediterranean fruit fly, 2. Cotton boll weevil &
3. Codling moth of apple.
Quarantine - Isolation to prevent spreading of infection.
10. Plant Quarantine - Legal restriction of movement of plant materials between countries and
between states within the country to prevent or limit introduction and spread of pests and diseases
in areas where they do not exist.
11. Pest Legislations
1905 - ‘Federal Insect Pest Act’ - first Quarantine act against San Jose scale
in USA. 1912 - ‘US Plant Quarantine Act’
1914 - ‘Destructive Insects and Pests Act’ of India
(DIPA) 1919 - ‘Madras Agricultural Pests and
Diseases Act’
1968 - ‘The Insecticides Act’
Different legislative measures:
i) Legislation to prevent the introduction of new pest, diseases & weeds from foreign
countries.
ii) Legislation to prevent the spread of already established pest, diseases & weeds
from one part of country to another.
iii) Legislation to enforce upon the farmers for application of effective control measures
to prevent the damage by already established pest, diseases & weeds.
iv) Legislation to prevent the adulteration & misbranding of insecticides & to determine
the permissible residue tolerances in food stuffs.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

v) Legislation to regulate the activities of pest control operations & the application of
hazardous insecticide.
Categories of legal Methods/Different Classes of Quarantine:
1) Foreign quarantine:
 Legislation to prevent the introduction of new pest, diseases & weeds from foreign
countries.
 To prevent the entry of foreign pests, in the world have restrictions on the import of
infested or infected plant materials under the provisions of quarantine laws. These
plants materials examined at each seaports like Mumbai, Calcutta, Cochin & Chennai
and airport like Amritsar, Mumbai, Calcutta, and Chennai & New Delhi.
 These stations operate under the provision made under the Government of India’s
Destructive Insects and Pests Act of 1914.
 The “Phytosanitary Certificate” should be issued by the officer of Department of
Agriculture of exporting country as to their freedom from pest & diseases.
 The Central Directorate of Plant Protection and Quarantine was established in 1946.
2) Domestic quarantine:
 Legislation to prevent the spread of already established pest, diseases & weeds from
one part of country to another.
 “The Bombay Agricultural Pests and Diseases Act” was passed in 1947 and
accordance with this the domestic quarantine in the state is being implemented.
 The Directorate of Plant Protection, Quarantine and storage is overall Incharge for
this work and it operates through several Inter-State check posts.
 So far Cottony cushion scale and San Jose scale were covered under this type of
quarantine.
3) Pest Act:
 Legislation to enforce upon the farmers for application of effective control measures
to prevent the damage by already established pest, diseases & weeds.
 Under the provision of “The Bombay Agricultural Pests and Diseases Act” State
Government may declared that certain pest is injurious in given area & carry out
preventive and remedial measures in order to eradicate the pest within a specified
period.
4) Insecticides Act:
 Legislation to prevent the adulteration & misbranding of insecticides & to determine
the permissible residue tolerances in food stuffs.
 The manufacture of insecticides should resister themselves stating the name and
address of the manufacturer, the brand and trade name of the insecticide, active
ingredient and other constituents of the product to be manufactured, its net contents in
an unit pack which should also carry in detailed directions for use including the
antidote against the insecticide in case of poisoning. The container should carry
“poison label” with warning or caution statement.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 The Government of India passed the Insecticide Act, 1968 (No. 46 of 1968) on 2nd
September, 1968 to regulate the import, manufacture, sale, transport, distribution and
use of insecticides with a view to prevent risk to human beings and animals.
 The Insecticides Rules framed under the Insecticide Act, 1968 (46 of 1968) came in
to force in 1st Jan, 1971.
 Licensing authority - In Maharashtra the commissioner of Agriculture, M.S. Pune is
the Licensing authority. However on behalf of him, Chief Plant Protection Officer,
MH State, Pune act as licensing officer for manufacture and formulation of pesticides
and for sale and stock concerned Divisional Superintending Agriculture Officer acts
as licensing officer.
Appellate Authority - any appeal against any decision of the licensing officer is made to
Appellate Authority. In MH, Joint Director of Agriculture (Extension), Department of
Agriculture M. S. Pune acts as Appellate Authority.
Insecticides Inspectors (Quality Control Officers) - The District Agriculture Officer of
Z.P. & Sub-divisional Agricultural Officers of Department of Agriculture can collect the
insecticides samples from the shops to ascertain their purity through insecticidal residue
laboratories.
Objectives:
1. To prevent the adulteration & misbranding of insecticides.
2. To regulate the import, manufacture, sale, transport, distribution and use of
insecticide.
3. To help and guide farmers for the use of insecticides.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

CHEMICAL CONTROL
 Chemical Control: Management of insect pests using chemical pesticides is
termed as chemical control. Or Pest control with the help of various chemicals is
called as chemical control.
 Pesticides: - The chemicals which applied for control of insect pests are called as
pesticides.
 History of insecticides development
Year Chemicals Discovered
900 Arsenites used in China (Inorganic compound)
1690 Tobacco extract used in Europe (Plant/natural product)
1787 Soaps used in Europe
1858 Pyrethrum was first time used for insect control in USA
1867 Paris Green in US
1874 DDT synthezized by Zeidler
1883 Bordeaux Mixture used in France
1892 Lead arsenate was used for control of Gypsy moth in USA
1925 Dinitro compounds used (First synthetic organic insecticide)
1939 Discovered of insecticidal property of DDT by Paul Muller in Switzerland.
(Awarded Nobel Prize in 1948)
1941 BHC used or discovered the insecticidal property in France and UK (in 1942) (BHC
is presently called as HCH)
1944 Parathion (Organophosphate) discovered by Gerhard Schrader in Germany
1945 Chlordane (Cyclodian compound) used in Germany
1947 Carbamate insecticides in Switzerland
1962 Miss Rachel Carson’s wrote the book name ‘Silent Spring’ in US which gives
the impact of insecticides on environment.
1967 First JH mimic (Juvenile Hormone mimic) used in US (Insect growth
regulator)
1970 Development of synthetic pyrethroids (UK) (Fast degradation) (Effective at very
low doses)
1980 Discovery of avermectins (derived from bacteria). Effective at low dose.
Fast degradation.
1990 Discovery of newer groups like (1) Neonicotinoids (Imidacloprid), similar
to natural nicotine, (2) Spinosyns (e.g. Spinosad) derived from actinomycet
Various generations of insecticides
Generation Year Compounds
1. First generation insecticide 1939-1942 BHC and DDT
2. Second generation insecticide 1944-1947 Organophosphates and Carbamate
3. Third generation insecticide 1967 Hormonal insecticides, JH mimic insect
growth regulators
4. Fourth generation insecticide 1970s Synthetic pyrethroids

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 Classification of Pesticides/Pesticides Groups

 The pesticides are generally classified into various groups based on pest organism
against which the compounds are used, their chemical nature, mode of entry and
mode of action.
1. Based on organism against which the compounds are used
Sr. Name of insecticides Definition
No.
1 Insecticides Chemicals used to kill or control insects. E.g. Carbaryl,
malathion
2 Rodenticides Chemicals used to kill the rodents called rodenticides. E.g.
Zinc phosphide
3 Acaricides/Miticides Chemicals used to kill the mites, ticks and spider called
acaricides. E. g. Dicofol, Properguite
4 Avicides Chemicals used to repel the birds. E.g. Anthraquionone

5 Molluscicides Chemicals used to kill the snails and slugs. E.g.

Metaldehyde
6 Nematicides Chemicals used to control nematodes E.g. Ethylene
dibromide
7 Fungicides Chemicals used to control plant diseases caused by fungi.
E.g. Copper oxychloride
8 Bactericide Chemicals used to control plant diseases caused by
bacteria. E.g. Streptomycin sulphate

9 Herbicide Chemicals used to control weeds. E.g. 2,4,D

10 Algicides Chemicals used to control algae.
11 Arboricides Chemicals used to control trees or shrubs.
12 Piscicides Chemicals used to control harmful fishes.
2. Classification based on Mode of entry
a) Stomach poison –
 Insecticides applied on leaves and other parts of plants when ingested get entry in
insects & act on digestive system to cause death of the insect. This type of chemicals
is limited mainly to the chewing type of insects like grasshopper, beetles, caterpillar
etc.
 The stomach poison should be sufficiently stable, cheap, and palatable for the pest,
available in large quantities.
 These chemicals may be applied in the form of dust or spray or in poison bait.
 E.g. Bt, Organochlorine and organophosphates insecticides etc.
b) Contact poison –
 The toxicant which causes death of insect by means of contact with insecticide.
Insecticides get absorb by the sutures, membrane & tracheal system on insect body.
This is achieved by direct application of insecticides on pest species.
 E.g. Nicotine, Pyrethrum, quinolphos, Malathion, synthetic pyrethroids etc.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

c) Fumigants –
 Toxicant which in its gaseous state or in vapour form penetrate in insect through the
tracheal system (respiratory poison) through spiracles & kills the insect.
 Their application is limited to plants or plant products in air-tight enclosures.
 E.g. Methyl Bromide, Hydrogen cyanide (HCN), ethylene dibromide, DDVP,
Lindane.

d) Systemic poison -
 Chemicals when applied to plant or soil are absorbed by foliage (or) roots and
translocated through vascular system and cause death of insect feeding on plant.
 It is effective against the pest having sucking type of mouth parts such as aphid,
jassid, thrips, white fly etc.
 E.g. Dimethoate, Imadaclopirid, Phorate, carbofuran etc.

3. Classification based on mode of action: -

a) Physical poison – Chemical which can kill insects by following three ways;
 Asphyxiation – A physical poison kill the insects exert by physical effect through
asphyxiation i.e. exclusion of air called physical poison. E.g. effect of heavy oil & Tar
oil on scale insects.
 Moisture stress – Loss of moisture from insect body by inert dust, charcoal, activated
clay, ash etc.
 Mechanical injury – Epicuticle of insect gets lacerated by abrasive dust like
aluminum oxide & this may cause water loss.
b) Protoplasmic poison –
 Toxicant responsible for precipitation of protein, destruction of midgut epithelium
called as protoplasmic poison.
 E.g. Heavy metals like mercury, copper, Fluorine.

c) Respiratory poison –
 The chemical which block cellular respiration, inactivation of respiration &
respiratory enzymes. This is known as anoxia.
 E.g. Hydrogen cyanide (HCN), Carbon monoxide (CO).
d) Nerve poison –
 The chemicals which affect the nervous system of the insect or Chemicals inhibit the
production of acetylcholinesterase enzyme in insects called as nerve poison.
 E.g. organophosphate, carbamate, organochlorines, pyrethrum and nicotine.
e) Chitin inhibition - Chemicals inhibit chitin synthesis. E.g. Diflubenzuron

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

1. Classification based on the Chemical nature of insecticide

Inorganic compounds Organic compounds

1. Arenicals
2. Fluorine Synthetic organic
compounds Hydrocarbon Animal Plant origin compounds
3. Sulphur oils origin 1. Nicotine Organoclorines
4.Lime & Organophosphates
Petrol, Kerosin (Nereis toxin) alkaloids
sulphur oil, Coal tar oil 2. Pyrethroids Carbamates
5. Barium 3. Rotenoids Synthetic
etc.
carbonate 4. Neem extract pyrethroids
6. Zinc
phosphoid

A) Inorganic Compounds: -
 The insecticides derived from naturally occurring elements which do not contain
carbon.
 It comprises compounds of mineral origin and element Sulphur and phosphorus.
 They are stable, non-volatile and soluble in water.
 Many of them are persistent and because of their residual persistent high mammalian
toxicity it’s a limited used.
 Both boric acid and silica used in baits for controlling the household pests like
cockroaches and ants.
1) Arsenicals -
 These are stomach poisons formed of toxic compounds of non-toxic elements arsenic.
 They are phytotoxic & not applied on plants.
 It is used in poison baits.
 They kill the insects due to the inhibition of respiratory enzyme.
 They are more stable and not harmful to plants.
 E.g. lead arsenate, Calcium arsenate, Sodium arsenate, etc.
2) Fluorine compounds -
 They kill the insects more rapidly than arsenicals. They are cheaper & less toxic to
higher animals.
 They are stomach & contact poison.
 They are irritating to the appendages of insects.
 These are cheaper and non-toxic to plants and animals.
 E.g. Sodium fluoride, Sodium fluosilicate.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

3) Sulphur -
 It is a contact poison.
 It is available in the form of both formulation dust as well as Wettable powder.
 It is used as acaricide as well as fungicide.
4) Lime Sulphur -
 It is prepared by boiling lime & Sulphur together in water (1:2).
 It is used against aphids, mites, San Jose Scale etc.
5) Zinc-phosphide -
 It is rodenticide used to control rat.
 It is heavy dark grey powder with disagreeable odour.
 Baits containing 2 % zinc phosphide are recommended for control of rats. In rats the
chemicals reacts with the hydrochloric acids present in the stomach and release
phosphine gas which is lethal to the rats.
6) Barium carbonate-
 It is also acts rodenticide.
 After ingestion internal bleeding of intestinal tract & kidneys occurred.

B] Organic Compounds: -
 These are man-made or extracted pesticides consisting of carbon, hydrogen and
chlorine, oxygen, sulphur, phosphorus and nitrogen.
a) Hydrocarbon oils:
 Oils composed of hydrogen & carbon. It has two groups viz.
 1) Mineral oils – These are petroleum oils derived from secondary rocks. E.g.
Kerosene, Petrol, Lubricants oil etc.
 2) Coal-tar oils – These are creosol oil & green oils are useful for insecticidal
purpose. E.g. summer oils, dormant oils, spray oils, supreme spray oils and Borer
solution to control bark borer, stem borer.
b) Animal origin insecticides:
 A toxin isolated from Marine annelids, Lumbrineris heteropoda & Lumbrineris
vicirra. i.e. Nereis toxin.
 Insecticidal properties of Nereis toxin has been found by Nitta in 1934 and it is given
by Sakai in 1964.
 Common name of Nereis toxin is Cartap and Trade name is Padan.
 It is effective against rice stem borer & cabbage diamond moth.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

c) Plant origin insecticides: (Botanicals insecticides/Natural insectcides)

 Toxicants derived from plants & used in insect control.
 It includes nicotine, pyrethrum, rotenone, Azadirachtin, Scilliroside, Pongram, Rynia,
Sabadilla.
 Certain plant products also used as a nematicides, insect attractants and repellants and
as diluents in insecticidal formulation.
1) Nicotine -
 Tobacco was used in insect control as early as 1763, the principal alkaloid Nicotine
was discovered in 1828.
 The chief source is Nicotiana tabaccum & Nicotiana rustica. 12 alkaloids have been
isolated from tobacco and alkaloid Nicotine constitutes 97% of the total alkaloids.
 Nicotine in leaves of N. tabacum is 2-5%. Nicotine is obtained from leaves and stem
of waste tobacco by steam sterilization.
 It is nerve poison & highly toxic when absorbed through cuticle/trachea.
 The commercial product is Nicotine sulphate containing 40% alkaloid.
 It is water soluble. It may be used as a spray or dust.
 It is effective against soft bodies insects like thrips, hoppers, etc.
 It is also a neuro-muscular poison in man and animal hence its used is discouraged.
2) Neem -
 The neem tree i.e. Azadirachta indica which is indigenous to India having the various
medicinal and insecticidal values. Now days it is assuming as an International Tree.
 All parts of neem possess insecticidal activity but seeds are main source which is most
effective.
 Neem bark leaves and neem oil as well as extracts with various solvents like ethanol
are found effective.
 Azadirachtin is the main active ingredient present in neem with other alkaloids like
limonoids and protolimonoids which shown repellent, antifeedants and insecticidal
activity.
 The antifeedants activity against desert locust which is shown by Pradhan et al. in
1962.
 It is used as growth inhibitor, cause egg sterility & adverse effect on fecundity.
 It is effective against American bollworm, leaf eating caterpillar, Diamond back moth,
and armyworm and sucking pest like leaf hoppers, thrips.
 Many commercial formulations are available in market like Achook, Bioneem,
Econeem, Neemark, Neemazal, Neem oil.
 5% Neem Seed Kernel Extract (NSKE) is mostly used in IPM programmes.
3) Pyrethroids/Pyrethrums/Pyrethrins -
 These are extracted from Chrysanthemum flower which contain active ingredients
pyrethrin I and II & cinerin I and II.
 Pyrethrums are dried flower powder of Chrysanthemum, Pyrethrins are all the active
toxins of pyrethrum and Pyrethroids are synthetic derivatives of pyrethrin.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 All pyrethroids are lipophilic (Fat loving) compounds and insoluble in water.
 It show higher toxicity against insects & very safe to mammals.
 These are contact poisons.
 Synthetic Pyrethroids like Cypermethrine, Permethrin, Deltamethrin, Decamethrine
and fenvalerate are effective against soft bodies & lipidopterous insects which are
contact and stomach poisons.
 Allethrin was the first synthetic analogue of pyrethrum developed in 1949.
4) Rotenone -
 It is derived from roots of bean legumes, Derris eliptica.
 Used in 1848 against leaf eating caterpillar.
 The active ingredient i.e. rotenone is isolated by the scientist Geoffroy I 1882.
 It is a contact and stomach poison.
 It inhibits respiratory metabolism‟.
 It is extremely toxic to fish hence used as a piscide (The chemical which is used to
kill the fishes).
5) Scilliroside -
 These are obtained from the bulb of Red Squill, Urginea maritime.
 The active ingredient presents i.e. Scilliroside which is generally used as rodenticides.
 It is a stomach poison.
 It is used to control the rats and mice.
6) Pongramm -
 These are derived from the plant Pongamia pinnata (Karanj).
 The active ingredient presents i.e. Pongram has been identified as ‘karanjin’.
 Karanj oil applied as surface protectant and repellent.
 It is used against pulse beetle and sucking pests.
7) Sabadilla -
 It is an alkaloid extracted from seeds of Schoenocaulon officinale.
8) Rynia -
 It is extracted from stem, roots, leaves and stalks of tropical shrub of Ryania speciosa.
Salicaceae, South American plant.
 It is water soluble powder.
 Extract contains several structurally related ryanoids including –ryanodine and 9, 21-
dehydroryanodine.
 The extract has a very low acute toxicity to mammals.
 Used for control of both adults and larval Lepidoptera.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

d) Synthetic organic insecticides: -

 These are dominating the field of pest control today.
 Historically Denitrophenols come first in 1925.
 It includes organochlorine, organophosphate, carbamates and synthetic pyrethroids.
1) Dinitrophenols: ((DNOC)
 They are Stomach poison with ovicidal effect on eggs of certain insects.
 E.g. Dinocap
2) Organic Thyocinates:
 It cause quick knock down effect.
 It is contact poison.
 E.g. Loro - Used against thrips, mites and aphids. Thanite - Used against housefly
and cattle pests.
3) Chlorinated hydrocarbons or organochlorines compounds:
 It includes DDT, BHC and Cyclodiene compound.
 DDT- (Dichlorodiphenyl trichloroethane)
 It was synthesized by a German chemist Zeidlar in 1874.
 Its insecticidal properties were given by Paul Muller in 1939.
 The proper chemical name of DDT is 2, 2-bis (P-chlorophenyl) 1, 1, 1-
(trichloroethane).
 It was very effective against flies, mosquitoes, lice and fleas and also used in
agriculture and horticulture sector.
 It has long residual life and persistence in the soil in aquatic environment and
also accumulates in plant and animal tissue hence it’s used is banned in
agriculture.
 DDT analogues - DDD (Dichloro diphenyl dichloroethane), Dicofol
(Kelthane-It is an acaricides), Methoxychlor.
 BHC- (HCH)
 The proper chemical name of HCH is 1, 2, 3, 4, 5, 6- Hexachloro cyclohexane
and common name is benzene hexachloride.
 It is synthesized by a Michael Faraday in 1825.
 Its insecticidal properties were given by A.P.W. Dupire in 1941 and F.D.
Leicester in 1942.
 BHC is a mixture five isomers in which gamma isomers were found to have
insecticidal properties is known as HCH.
 A product containing 99% pure gamma isomers called lindane name proposed
after Vander Lindane, who was isolate this isomers in 1912.
 HCH is stomach and contact poison and has fumigant action.
 Lindane mostly used in control of stored grain pests.
 Cyclodiene compound -
 Due to the persistence in the soil, resistance in insect, fish toxicity and serious

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

environmental hazards is being banned insectcides.

 It includes Endosulfan, Aldrin, Dieldrin, Heptachlor and chlordane.
 Endosulfan -
 Its insecticidal properties were first discovered by W. Finkenbrink
in1956.
 It is a stomach and contact poison.
 It is effective against sucking pests, caterpillars and borers.
 It is available in the form of dust, EC and granule formulations.
 Chlorinated terpenes - e. g. Toxaphene
4) Organophosphorus insecticides or organophosphates:
 They comprise a large group of compounds.
 They are generally acutely toxic to man and animals and they are non-persistent.
 They have a short residual activity.
 They are nerve poison which inhibits the cholinesterase enzyme.
 These are stomach, contact and systemic in activity.
 It has been used in large scale for agriculture because of its high efficacy against
many insects-pests, low mammalian toxicity, short residual activity and little
resistance among insect-pests.
 Insecticides like Dematon, Dimethoate, Phorate, Phosphamidon and Monocrotophos
have asystemic action hence it is used against sucking pests.
 Dichlorvos or 2, 2-dichlorovinyl dimethyl phosphate (commonly abbreviated as
DDVP) and Tetraethyl pyrophosphate, (abbreviated TEPP) is an organophosphate,
widely used as an insecticide to control household pests, in public health, and
protecting stored product from insects.
 Monocrotophos shows the some acaricidal activity and Dichlorvos shows the
fumigant action.
 Examples - Monocrotophos, Dichlorovos, Triazophos Chloropyriphos, Profenophos,
quinophos, Malathion, Phosphamidon, Fenthion, Methyl parathion, Trichlorofon,
Methyl dematon, Ethion, Formothion, Fenitrothion, Dematon, Dimethoate, Acephate,
Phorate, Fipronil, Indoxacarb, etc.
5) Carbamates:
 These are ester of carbamic acids.
 They generally have a short residual activity and a very broad-spectrum effectivity as
insecticides, miticides, nematicides and molluscicides,
 Carbary -
 The trade name of carbaryl is Sevin.
 It is contact and stomach poison.
 It is available in the form of dust, granules and Wettable powder formulation.
 It is very popular in horticulture for pest management.
 Carbofuran -
 The trade name is Furadan.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 It is systemic in action hence effective against sucking pests.

 It is also used as nematicides and soil pests.
 Other examples of carbamates such as Aldicarb, Mythomyl, Thiodicarb, Oxamyl etc.
6) Synthetic pyrethroids -
 These are extracted from Chrysanthemum flowers.
 These are the mixtures of six esters named pyrethrin I and II, cinerin I and II and
jasmolin I and II.
 Generally it is botanical insecticides but as they contain only one of these esters, isect
species tend to develop resistance to them.
 Generally pyrethroids shows low mammalian toxicity but pyrethrum, are highly toxic
to fish and bees because they having all six esters properties hence it is not suited in
agriculture.
 These are contact and stomach poisons.
 Examples - Allethrin, Resmethrin, Deltamethrin, Permethrin, Fenvalerate,
Cypermethrin, Cyfluthrin and Bifenthrin.

7) Fumigant:
 These are the substance which produces gas, vapour, fumes or smoke intended to kill
insects, nematodes, bacteria or rodents.
 Generally these are solid, liquid or gaseous substances which contain halogen atoms.
 They are used to disinfect the buildings, stored produce or the soil.
 Chloropicrin is called as “tear gas”.
 E.g. Chloropicrin, Aluminium phosphide tablets, Ethylene dibromide, Methyl
bromide, Formaldehyde, Phosphine, Naphthalene.

New groups of insecticides/ Newer Insecticides

A) Neonicotinoids -
 These are new class of insecticides with novel mode of action.
 It is effective against sucking pests.
 It acts on the nicotine acetylcholine receptors (nAChR) at the synaptic junctions of
insect central nervous system.
 Examples - Imidacloprid, Acetamiprid, Thiomethoxam, Thiocloprid, Clothianidin etc.
 Imidacloprid -
 The trade name is Confidor (Bayer), Gaucha (Bayer), Admire etc.
 It is effective as a seed dressing Gaucha (Bayer) and foliar application
Confidor (Bayer) against sucking pests like Aphid, Jassids, Thrips and White
fly.
 Acetamiprid -
 The trade name is Pride, Dhanprit, Manik, Lift, Polar, mudra, Record, Enova.
 It is broad spectrum insecticides effective against sucking pests.
 Thiomethoxam -
 The trade name is Cruiser (Syngenta), Actara (Syngenta).
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 It is broad spectrum insecticides effective against sucking pests as a seed

treatment Cruiser (Syngenta) and foliar spray Actara (Syngenta).
 Thiocloprid -
 The trade name is Alanto, Calypso.
 It is broad spectrum insecticides effective against the insect pests.
 It acts as a stomach poison.
B) Spinosyns -
 Spinosad -
 It is introduced by Dow-Elango in 1994.
 It is derived from new species of Actinomycetes, Saccharopolyspora spinose.
 It is commercially available as Spinosad (Tracer).
 It acts as stomach and contact poison.
 Spinosad is a mixture of spinosyns A and D.
 It is broad spectrum insecticides effective against caterpillars.
 It acts on the nicotine acetylcholine receptors (nAChR) at the synaptic junctions of
insect central nervous system.
C) Avermectins -
 These are generally best for the control of greenhouse pests and insects like leaf
miners, spider and mites.
 It possess novel mode of action by acting on GABA (Gamma Amino Butyric Acid)
regulated chloride channels of central nervous system in insects.
 They are derived from Streptomyces avermitilis by Merck & Co.
 Abamectin -
 The trade name is Vertimec.
 It is a mixture of two analogs i.e. 80% Avermectins B1a and 20% B1b.
 It acts as a systemic action.
 Emamectin Benzoate -
 The trade name is Proclaim, Derim, Safari, Tatkal .
 It is analog of abamectin.
 It is effective against caterpillars.
 It acts as a both stomach and contact poison.
C) Oxadiazines -
 Indoxacarb -
 Commercially available as an Avaunt.
 It is sodium channel blockers in nervous system.
 They have a novel mode of action and it is effective against those pests which
developed resistance against synthetic pyrethroids.
D) Phenypyrazoles -
 Fipronil -
 Commercially available as an Icon and Regent.
 It is effective against those pests that are already become resistance to
pyrethroids, organophosphates and carbamates.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 It possess novel mode of action by acting on GABA regulated chloride

channels of central nervous system in insects.
 It is stomach and contact poison with systemic action.
 It can use as a foliar, seed treatment and soil application for controlling pests.
E) Diamides -
 These are the Ryanodine receptors modulators. A large Ca++ release channel in the
membrane of muscle sarcoplasmic reticulum (SR) is called the ryanodine receptor,
because of sensitivity to inhibition by a plant alkaloid ryanodine.
 Ryanodine - It is neutral alkaloid isolated from the stem, roots, leaves and stalks of
plant Ryania speciosa.
 It is contact as well as stomach poison.
 Flubendiamide -
 First synthetic ryanodine receptor insecticide to be commercialized.
 Commercially available as Fame (Bayer) in Suspension Concentrate (SC)
formulation and Takumi (TATA) in Granule formulation.
 It is effective against lepidopteran pests.
 It is safe to bees and other natural enemies.

 Rynaxypyr (Chlorantraniliprole) -
 Commercially available as Coragen (Dupont).
 It is effective against lepidopteran pests.
 It is available in Suspension Concentrate (SC) formulation.
 Rynaxypyr controls insect pest by activating insect ryanodine receptors.
 Cyazypyr (Cyantraniliprole) -
 Commercially available as Benevia (Dupont).
 It is available in Oil Dispersion (OD) formulation.
 It is effective against lepidopteran pests and also sucking pests.
 It also shows ovicidal and larvicidal effect.
 It also harmful to bees and other natural enemies.

F) Cartap Hydrochloride -

 It is Nereistoxin analog means animal originated insecticides.

 It is extracted form a marine annelids, Lumbriconereis heteropoda.
 It is contact, stomach and systemic poison.
 It is effective against chewing and sucking pests.
 Commercially available as Caldan, Padan, Campas.
 It is available in the formulation of Soluble Powder (SP).

G) New Pyrethroids -

 Examples - Lambda-cyhalothrin (Karate, Matdor, Riva), Bifenthrin.

 The mode of action is same as that of synthetic pyrethroids.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 They have broad spectrum activity against white fly, mites and cotton bollworm.
 Lambda-cyhalothrin is also used for control of mosquitoes and thrips.
H) New Acaricides / miticides -

Fenazaquin -
 Commercially available as a Magister.
 It is contact poison.
 It is a Mitochondrial Electron Transport Inhibitor.
 It is environmentally safe.
Propergit -
 Commercially available as an Omite, Proguard, Indomite.
 It is stomach poison and fumigants action.
Spiromesifen -
 Commercially available as an Oberon.
 It is lipid biosynthesis inhibitor.
 It is available in Suspension Concentrate (SC).

I) Insect Growth Regulators (IGR’s)

 Insect Growth Regulators (IGRs) are compounds which interfere with the
growth, development and metamorphosis of insects.
 It acts on the endocrine system of insects.
 It is environmentally safe.
 IGRs include synthetic analogues of insect hormones such as ecdysoids and juvenoids
(JH Mimics), non-hormonal compounds such as Anti JH and chitin synthesis
inhibitors.
 Juvenile Hormones Mimics (JH Mimics)-
 JH mimics were first identified by Williams and Slama in the year 1966.
 JH Mimics have anti-metamorphic effect on immature stages of insect.
 JH Mimics are larvicidal and ovicidal in action and they disrupt diapause and
inhibit embryogenesis in insects.
 Methoprene, Fenoxycarb, Novaluron Pyriproxyfen are used as Juvenile
Hormones Mimics.
 Fenoxycarb has been used for fire ant management.
 It sterilized the queen of colony. Pyriproxyfen used for suppressing the pests
like flies, mosquitoes.
 Chitin synthesis inhibitors -
 Benzoyl phenyl urease has been found to have the ability of inhibiting chitin
synthesis in vivo by blocking the activity of the enzyme chitin synthetase.
 It prevents the acetylation of glucose to form glucosamine which is one of the
components of the insect exoskeleton. E.g. Lufenuron and Flufenoxuron.
 Two important compounds in this category are Diflubenzuron (Dimilin) and
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

Penfluron.
 Another compound from the class is thiadizines, buprofezin has been effective
against hemipteran insects like white fly. It inhibits the biosynthesis of chitin.

Recent /Newer Methods of Pest Control

1) Attractant
2) Repellents
3) Antifeedants/Feeding deterrents
4) Sterility technique
5) Hormones
6) Gamma radiation
7) Genetic control (Transgenic crops)
1) Insect Attractant
 Chemicals that cause insects to make oriented movements towards their
source are called insect attractants.
 They influence both gustatory (taste) and olfactory (smell) receptors.
 The interspecific semiochemicals that favor the producer are called Allomones.
While those favors the receiver called as Kairomones.
 Types of Attractants:
a) Pheromones: Pheromones are chemicals secreted into the external
environment by an animal which elicit a specific reaction in a receiving
individual of the same species.
i) Sex pheromones – A sex pheromones released by one sex
only to attract the other sex of the species. E.g. For cotton
bollworm- Vitlure & Ervitlure for spotted bollworm,
Helilure & Hexalure for American bollworm.
ii) iii) Aggregation pheromones – The pheromones released by
one sex only give response in both sexes of a species. E.g.
Melon fruit fly attracted by cue-lure.
b) Food lures: Chemical present in plants that attract insect for feeding. They
stimulate olfactory receptors.

List of natural and synthetic food lures

Insect-Pests Natural and synthetic food lures
Natural
Pests of cruciferous Iso-thiocyanates from seeds of cruciferous
Onion fly Propylmercaptan from onions
Bark beetle Terpenes from barks
Housefly/Moths/Butterflies fermenting syrup, Sugar and molasses
Synthetic
Oriental fruit fly Methyl eugenol
Mediterranean fruit fly Cuelure
Melon fruit fly Trimedlure
DBM (Diamond Back Moth) Sinigirin
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

c) Ovipositional lures: - Chemicals that govern the selection of suitable sites for
oviposition by adult female. E.g. paramethyl-acetophenon = Rice stem borer,
Helicoverpa lay eggs more on plants which dipped in juice of corn silk.
2) Repellents
 Chemicals that induce avoiding (oriented) movements in insects away from their
source are called repellents.
 They prevent insect damage to plants or animals by rendering them unattractive,
unpalatable or offensive.
 Types of repellents
I) Physical repellents: Produce repellence by physical means
 Contact stimuli repellents: Substances like wax or oil when applied on leaf surface
changes physical texture of leaf which are disagreeable to insects
 Auditory repellents: Amplified sound is helpful in repelling mosquitoes.
 Barrier repellents: Tar bands on trees and mosquito nets are examples.
 Visual repellents: Yellow light acts as visual repellents to some insects.
 Feeding repellents: Antifeedants are feeding repellents. They inhibit feeding.
II) Chemical repellents:
 Repellents of Plant origin:
 Essentials oils of Citronella, Camphor and cedar wood act as repellents.
 Commercial mosquito repellent ‘Odomos’ uses citronella oil extracted from
lemongrass, Andrpogon pardus as repellent.
 Pyrethrum extracted form Chrysanthemum is a good repellent.
 Creosol and coal-tar oil protect wood form termite attacks.
 Synthetic repellents: Repellents synthetically produced.
Insects Repellents
Mosquito, blood suckers Dimethyl phthalate
Mites (chiggers) Benzyl benzoate
Crawling insects Trichloro benzene
Phytophagous insects Bordeaux mixture
Wood feeders Pentachlorophenol
Fabric eaters Naphthalene or mothballs
Bees Smoke

3) Antifeedants/Feeding deterrents
 Antifeedants are chemicals that inhibit feeding in insects when applied on the foliage
(food) without impairing their appetite and gustatory receptors or driving (repelling)
them away from the food.
 They are also called gustatory repellents, feeding deterrents and rejectants. Since do
not feed on treated surface they die due to starvation.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 Groups of antifeedants
 Triazenes: AC 24055 has been the most widely used triazene which is a oduorless,
tasteless, non-toxic chemical which inhibit feeding in chewing insects like
caterpillars, cockroaches and beetles.
 Organotins: They are compounds containing tin. Triphenyl tin acetate is an important
antifeedants in this group effective against cotton leaf worm, Colorado potato
beetle, caterpillars and grass hoppers
 Carbamates: At substance lethal doses thiocarbamates and phenyl carbamates act as
antifeedants of leaf feeding insects like caterpillars and Colorado potato beetle.
Baygon is a systemic antifeedants against cotton boll weevil.
 Botanicals: Antifeedants from non-host plants of the pest can be used for their
control The following antifeedants are produced from plants.
 Pyrethrum: Extracted from flowers of Chrysanthemum cinerarifolium acts as
antifeedants at low doses against biting fly, Glossina sp.
 Neem: Extracted from leaves and fruits of neem (Azadirachta indica) is an
antifeedants against many chewing pests and desert locust in particular
 Apple factor: Phlorizin is extracted from apple which is effective against non- apple
feeding aphids.
 Solanum alkaloids: Leptine, tomatine and solanine are alkaloids extracted from
Solanum plants and are antifeedants to leaf hoppers.
 Miscellaneous compounds: Compounds like copper stearate, copper
resinate, mercuric chloride and Phosphon are good antifeedants.
4) Sterility technique
 Definition - Control of pest population achieved by releasing large number
of sterilized male insects, which will compete with the normal males and
reduce the insect population in subsequent generation.
 It is usually referred as SIT (Sterile insect technique) or SIRM (Sterile insect
release method).
 Sterile insect release method is a genetic control method. This is also called autocidal
control since insects are used against members of their own species.
 E.F. Knipling in 1937 in South East USA used the SIRM technique to control
the screw worm fly a serious livestock pest. It is also referred as ‘Father of Male
Sterility Technique’.
 Methods of sterilization-
1. Chemosterilants: Any chemical which interfere with the reproductive
capacity of an insect. They inhibit nucleic acid synthesis, inhibit gonad
development, and produce mutagenic effect which prevents the production of
F1 generation. E.g. TEPA (Tetraethylenepentamine), Metapa, thiotepa,
apholate, Chloro ethylamine, 5-Fluororacil, Amithopterin. 0.5% TEPA
reduced housefly population. apholate solution cause male sterility in boll
weevil.
2. Irradiation: Irradiation done by exposing insects to radiations, X rays and
neutrons of these, radiation by Cobalt 60 is the most common method.
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

Limitations-
 Not effective against insects which are prolific breeders.
 Sterilizing and mutagenic effect of chemosterilants and irradiation cause
problem in higher animals and man (Carcinogenic and mutagenic).

5) Genetic control (Transgenic crops)

 Use of molecular biology techniques for the management of insect pests. The
following are some strategies.
1. Wide hybridization: This technique involves transfer of genes from one
species to other by conventional breeding. The genes for resistance are
transferred from a different species. E.g. WBPH resistant gene has been
transferred to Oryza sativa from O. officinalis.
2. Somaclonal variability: The variation observed in tissue culture derived
progeny. E.g. Somaclonal variants of sorghum resistant to Spodoptera litura
have been evolved.
3. Transgenic plants: Transgenic plants are plants which possess one or
more additional genes. This is achieved by cloning additional genes into
the plant genome by genetic engineering techniques. The added genes impart
resistance to pests.
 Transgenic plants have been produced by addition of one or more following gene
Bt. endotoxin from Bacillus thuringiensis, Protease inhibitors, Amylase inhibitors, Lectins
and Enzymes.
 Bt. endotoxin gene: The gram positive bacteria Bacillus thuringiensis
produces a crystal toxin called(delta) endotoxin. The endotoxin is a stomach
poison and kills the lepidopteran insects if consumed.
 The gene (DNA fragment) responsible for producing endotoxin is isolated
from Bt. and cloned into plants like cotton, potato, maize, etc. to produce
Transgenic cotton, etc.
Transgenic Bt plants Target insect pests
1. Cotton Bollworms, S. litura
2. Maize European corn borer
3. Rice Leaf folder, stem borer
4. Tobacco, Tomato Cut worms
5. Potato, Eggplant Colorado potato beetle

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Toxicity of insecticides
Terminology -
 Toxicology: Toxicology is the science which deals with study of the poisons and their
effect on living organisms.
 Toxin/Poison: A substance which produces harmful effect when ingested /inhaled/
absorbed by the human being.
Poison is a substances which when taken orally in quantities even less than 4
gm or inhaled in concentrations less than 200 parts per million (ppm) in air quickly
fatal, by means other than physical or mechanical.
 Toxicity: Toxicity is the inherent ability of a pesticide to cause harm to a specific
organism.

 Types of toxicity :
1) Acute Toxicity - It is result of single dose, which causes death of insects.
2) Chronic Toxicity - It is result of cumulative effect of several small doses, each dose not
produces symptoms of death.
 Degree of toxicity / Toxicity parameters -

1.) LD50 (Median lethal dose): LD50 defined as the amount of insecticide per unit
weight which will kill 50% of the test organism / insect.
 LD50 usually expressed as mg/kg body weight or g/larva or adult insect.
2.) LC50 (Median lethal concentration): LC50 defined as the percentage of
toxicant required required to kill 50% of the given organism or insect.
 This is used when the exact dose per insect is not known, but the concentration
is known.
 LC50 is expressed in PPM (1/1,000,000) or Percentage (1/100)
3.) LT 50 (Median lethal time):LT50 is defined as the total time required to kill 50%
of the insect population at a certain dose or concentration.
 LT50 expressed in hours or minutes.
 LT50 is used in field studies and also for testing insect viruses (NPV).
4.) KD50: Median knockdown dose Dose of insecticide or time required to
KT50: Median knockdown time knockdown 50% of the insects.
 KD50 and KT50 are used for evaluating synthetic pyrethroids against insects.
5.) ED50: Median effective dose These terms are used to express the
EC50: Median effective concentration effectiveness of Insect Growth
Regulators (IGR)
 ED50 and EC50 are defined as the dose or concentration of the chemical (IGR) required
to affect 50% of population and produce desired symptoms in them.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Based on their LD50 values pesticides can be classified are as follows;

1) Extremely Toxic - LD50 up to 50 mg/kg. e.g Phorate.
2) Highly Toxic - LD50 between 51-500 mg/kg. e.g. Phosphamidon.
3) Moderately Toxic - LD50 between 501-5000 mg/kg. e.g. Dimethoate.
4) Slightly Toxic - LD50 = 5000 mg/kg and above. e.g. Malathion, Carbaryl.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Formulations of insecticides
Formulation: - Incorporation of pesticide into a suitable carrier, solvent and the
supplementary agents or adjuvant is known as formulation.
 It is mixture of active and inactive ingredients.
Necessity of formulation -
i) Pure pesticide is costly; the formulations give cheaper & safe form of insecticide.
ii) High concentrations may prove to be phototoxic.
iii) Easy distribution on large area due to large volume formulation.
iv) Pure material is highly hazardous in handling, formulation decreases the residual
hazards.
v) To improve effectiveness of insecticides.
Types of Formulations -
Liquid formulation Dry Formulation
Emulsifiable Concentrate (EC) Dustable Powder (DP)
Solution (SL) Wettable Powder (WP)
Suspension Concentrate (SC) Soluble Powder (SP)
Concentrate Emulsion (EW) Water Dispersible Granule (WG)
Micro emulsion (ME) Granule (G)
Aerosol (Aer)
Soluble Liquid (SL)
Ultra-Low Volume Liquid (ULV)
Oil Dispersion (OD)

Dry Formulation
1) Dusts:
 In this formulation the toxicant is diluted either by mixing with or by impregnation on
carrier.
 The carrier may be an organic flour (Walnut shell flour, wood bark) or pulverized
mineral (Sulphur, Lime, Gypsum, talc) or clay (attapulgite, bentonites, kaolins).
 The toxicant in a dust formulation ranges from 065% to 25%.
 Those having particle size less than 100 micron.
 Dust formulation must be done in a calm weather and early in the morning when plant
is wet with dew.
 It is denoted by ‘D’
 E.g. Lindane 0.65%, Malathion5%, Carbaryl 10%.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 Advantages:
i) Dust can be used where water supply is difficult & inadequate.
ii) Less quantity required as compared to spray material.
iii) Application is faster than spray solution.
iv) Due to the light in weight it can be used in hilly areas or muddy fields.
v) It is cheaper and requires less cost.
 Disadvantages:
i) Drift problems - dust are likely to blow away along with wind velocity.
ii) Due to the less diposition on plants its efficiency is decreases.
2) Wettable powders/Water dispersal powders:
 WP is the powdered formulation which gives stable suspension when diluted with
water.
 The toxicant/active ingredient in a formulation ranges from 15% to 95%.
 It is formulated by blending the toxicant with diluents such as attapulgite, a surface
active agents and auxiliary material such as sodium salt & sticker is also added.
 It is more effective than dust.
 It is denoted by ‘WP/WDP’
 E.g. Carbaryl 50% WP.
3) Granules:
 It is a granular formulation of insecticide composed of inert material (Carrier, diluents
like vermiculite) or vegetable carrier impregnated. or fused with toxicant.
 The particle size ranges from 250 to 1250 microns.
The formulation contains 2 to 10% concentration of toxicant.
 This formulation is used for the control of weeds, plant diseases and insect-pests,
nematodes, snails & slugs, rodents.
 It is denoted by ‘G’.
 E.g. Phorate 10%, Carbofuran 3%, Quinalphos 5%.
 Advantages:
i) No undue loss of insecticide.
ii) Undesirable contamination is prevented.
iii) Water is not requiring for application.
iv) Less harmful to natural enemies.
 Disadvantages:
i) Not as effective as spray.
ii) Scorching may occur if toxicant in concentrated.
4) Soluble Powder (SP)

 Similar to the Wettable powder, but dissolve readily and forms a true solution.
 It composed of pesticides, water soluble diluents, Wetting and dispersing agents.
 E.g. Acephate75 SP.
5) Water Dispersible Granule (WG)

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 It composed of active ingredients, diluents, Wetting and dispersing agents.

 E.g. Thiomethoxam 25 WG

Liquid formulation

1) Emulsifiable Concentrate:

 The formulation contains the toxicant, a solvent of toxicant and an emulsifying agent.
 It is clear solution which gives an emulsion of oil-in water type when diluted with
water to spray.
 When sprayed the solvent evaporates quickly leaving a deposits of toxicant from
which water also evaporated.
 Emulsifying agents used are alkaline soap, organic amines, carbohydrates, gum,
lipids, proteins etc.
 It is denoted by ‘EC’.
 E.g. Chlorpyriphos 20 EC, Profenophos 50 EC.
 Advantages:
i) Dilution of chemical with water is possible.
ii) Better contact with insect cuticle.
iii) Surface tension of the spray reduced.
iv) Even distribution of insecticides possible.
2) Solution: (SL)
 Toxicants dissolved in organic solvent such as Amyl acetate, Carbon tetrachloride,
Ethylene dichloride, Xylene, Petroleum & Kerosene.
 It is mostly used to control household pests & aquatic insects like mosquitoes.
 It is denoted by ‘SL’.
 E.g. Imidacloprid 17.8SL
3) Aerosol:
 The toxicant is suspended in mixture particles (Size ranges from 0.1 to 50 microns) in
air as a fog or mist.
 This is achieved by i) burning the toxicant with heat, ii) the toxicant dissolved in
liquefied gas.
 When released the toxicant particles to float in air with the rapid evaporation of the
released gas.
 Effective against flying insects and the pests in dense foliage.
 E.g. Aerosol bomb.

4) Fumigants: -
 A chemical compound which is volatile at ordinary temperature & sufficiently toxic is
known as fumigants.
 It is used against stored grain pest & nematodes.
 E.g. Aluminium phosphide tablets, Ethylene dibromide, ED/CT Mixtures.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 Adjuvants :
 Supplementary agents which do not contribute directly to the toxic effect of
pesticide but are used for improving physical condition of pesticides so that
pesticide become more effective in action.
 Types of Adjuvants
 Dust carriers - Organic flour, lime, gypsum, talc, kaolin,& volcanic ash.
 Solvents - Amyl acetate, Carbon tetrachloride, Ethylene dichloride,
Xylene, Petroleum & Kerosene, pin oil.
 Dispersing agents - Polyfon H, Blancol, Daxad 21.
 Emulsifiers (Emulsifying agents) -
o It is surface active agents.
o The principal function is to modify the properties.
o They may be O/W (oil in water type) or W/O (water in oil type).
o The pesticidal emulsions are oil in water type.
o E.g. Alkaline soaps, Carbohydrates, proteins, organic amines.
 Wetting and spreading agents - Soaps, Teepol, Tergitos, Triton X-100.
 Stickers -
 Synergists: Chemicals which by themselves are nontoxic or only slightly toxic but when
mixed with pesticides increase their toxicity. E.g. Sesamin, Sulphoxide.
 Antagonistic: The chemicals when mixed together reduce the toxicity of mixture

PLANT PROTECTION APPLIANCES

Dusters: - Appliances/equipment that is used for applying dry dust formulations of
pesticides is called as dusters.
 Parts of typical duster: -
 Hopper or Container- To hold the dust.
 Blower or Bellows- To create air current for ejecting out the dust.
 Operating mechanisms- Required to work equipment.
 Agitator- To stir the dust in the hopper.
 Feed mechanisms
 Discharge line
 Mounting.

Types of duster-
1. Rotary dusters: They are also known as crank dusters and fan type dusters. They
vary in design and may be shoulder mounted, back mounted or belly mounted. The
capacity of rotary duster is 4-5 kg dust. They are used for dusting field crops,
vegetables and small trees and bushes in orchards. The efficiency is 1 to 1.5 per day.
2. Knapsack dusters: The capacity of knapsack duster is 2 to 5 kg. They are used for
low crops and for spot application.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

3. Power operated dusters: This may be from Knapsack types with engine motive
power to powerful row crop or trees dusters pulled by tractor. These dusters are
useful for covering larger area and tall trees.
4. Plunger duster: The capacity of plunger duster is ½ kg. It is used kitchen garden.
5. Bellow duster :

Sprayers-

Principle: The function of a sprayer is to atomize the spray fluid into small
droplets and eject it with some force.
 Parts of typical sprayer: -
 Tank: To hold the spray fluid during spraying.
 Pump: The pump is necessary for creating the energy required for
atomization of spray fluid.
 Agitator: Used for dispersing the pesticide uniformly.
 Pressure gauge: It is connected to the pipe line near the nozzle
usually.
 Valves: They govern the direction of the flow of the spray fluid.
 Filter: This is provided mainly to protect the pump from abrasion, to
avoid interference with the function of valves and to prevent blocking
of nozzles.
 Pressure chamber: It prevents fluctuation in the pressure & records it.
 Hose: For conduction of the spray fluid from sprayer to lance.
 Spray lance: It is useful for spraying under surface of leaf.
 Cut-off valve: It is used to shut off the liquid.
 Spray boom: Spray bars carrying more than one nozzle is known as
spray booms.
 Nozzle: It breaks the liquid into droplets and spread them into spray
droplets. It consists of Body, Cap, Swirl plate, Washer (sealer), Stainer.

 Types of nozzles-
 Fan spray nozzles: It is recommended for spraying flat surface such as soil.
Usually for spraying herbicides.
 Hollow cone (ring) nozzles: It is used for insecticide and fungicide spraying.
 Solid cone nozzles: It is used for herbicide spraying.
 Flood jet nozzle: It is used for herbicide spraying.

Types of sprayers –
A. Hand Sprayer or Manually operated-

Hydraulic sprayers-
1. Hand syringe: It is useful to operate only a small area. It is single acting pump
working on the principle of cycle pump.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

2. Hand sprayer: The tank capacity is 0.5 to 1.0 litres. It also used for spraying
small kitchen garden.
3. Bucket pump sprayer (Stirrur pump): Mostly buckets are used as containers
for holding spray fluid at time of spraying. This is suited for small scale spraying.
About 1 to 1.5 hectare area can be covered in a one day.
4. Knapsack sprayer: Also known as Backpack. The tank capacity is 10 to 14 litre
capacity. The pressure is developed with help of level handle. They are useful for
small scale spraying or spot spraying gardens, vegetables plots, vineyards etc.
About 0.5 hectare area can be covered in a one day.
5. Rocker sprayer: It is used for spraying fruit trees and tall crops.
6. Foot sprayer (pedal pump): Used for spraying field as well as fruit crops.
Principle is same as in case of rocker sprayer but it is operated by foot instead of
hand. About 1 to 1.5 hectare area can be covered in a one day.

B. Manually operated compression sprayers: These are also known as pneumatic

sprayers.
a. Pneumatic hand sprayer: It is mostly used in glass houses and kitchen
garden.
b. Pneumatic knapsack sprayer: It is also known as shoulder mounted sprayer.
The capacity is 18 liter. It is used for field and vegetable plots, flower garden.
C. Power Operated sprayer:
a. Mist blower cum duster- (Motorized knapsack sprayer)(Gaseous energy
sprayer):- Worked by petrol driven engine. It produces very fine droplet size
50 to 150 micron. About cover 3 hectare areas in a one day.
b. Portable power sprayer- Useful for large scale spraying in plantation,
orchard, flowers and vegetables gardens.
D. Ultra-low volume sprayer (ULV) (Hand carried, battery operated spinning dis-
sprayer): Here the pesticides are applied as such or with less than 5 liters spray fluid
produces fine droplets (80 μm).
E. Electrodyn sprayer (EDS): Electrodyn sprayer is completely a new system of
spraying for the controlled droplet application of chemicals (CDA).

Other appliances:-
1. Soil injecting gun- It is used for fumigating the soil at different depths to control the
nematodes and soil insects.
2. Bird scarer- It is mechanical device produced loud noise at regular interval and used
to scare away the birds. It consists of a big chamber to hold calcium carbide and
water. Due to the combustion of this mixture acetylene gas is produce.
3. Flame thrower- It is ordinary pneumatic sprayer filled with kerosene for producing
flame. It is used to destroy locust swarm, hairy caterpillars.
4. Rat fumigation pump (Cynogas pump) - It is used for blowing calcium cyanide into
rat holes, termite mounds. This kills rats, mites, termites.
5. Granular applicator- Use for granular application.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

SEMIO-CHEMICALS

 The word “Semion” means “Signal”. Chemicals involved in the communication are
termed as a semiochemicals.
 Semiochemicals are chemical substances that mediate communication between
organisms.
 Most secreted by exocrine glands in insects.
 Can be divided into two groups based on who `sends’ a massage and who `received’.
 Semiochemicals may be classified into Pheromones (intraspecific semiochemicals)
and Allelochemicals (interspecific semiochemicals).
i) Intraspecific semiochemicals: - These are responsible for behavioral changes
among individuals of the species. E.g. Pheromones
ii) Interspecific semiochemicals: - These are responsible for behavioral changes
between the individuals of different species. E.g. Allelochemicals

 Pheromone
 Pherein = to carry,
 Hormone = to excite
 In 1 9 5 9 , German chemists Karlson and Luscher coined the term pheromone.
 Pheromones are exocrine secretions of insects which are used for communication among
different individuals of the species (Karlson and Luscher, 1959).
 Definition: - A substance that is secreted by an organism to the outside environment and
cause specific reaction in a receiving organism of the same species.

 Pheromones can be classified into 2 groups

1) Primer pheromones: Primer initiates changes in development, such as

maturation. They act through gustatory (taste) sensilla. e. g. Caste determination
and reproduction in social insects like ants, bees, wasps, and termites are
mediated by primer pheromones. These pheromones are not of much practical
value in IPM.
2) Releaser pheromones: Releaser which induce immediate behavioural change.
This pheromones act through olfactory (smell) sensilla and directly act on the
central nervous system of the recipient and modify their behavior. They can
be successfully used in pest management programme.
Releaser pheromones may be further subdivided into
 Sex pheromones
 Aggregation pheromones
 Alarm pheromones
 Trail pheromones
1.) Sex pheromones
 A substance generally produces by a female to attract the male for the purpose of
mating.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

 In 1 959 , A. A. Butenandt isolated and identified the first pheromone, a sex

attractant from silkworm moths, Bombykol.
 They are most commonly released by females but may be released by males also.
 Insects order producing the sex pheromones
 Lepidoptera, Orthoptera, Dictyoptera, Diptera, Coleoptera, Hymenoptera,
Hemiptera, Neuroptera and mecoptera.
 In Lepidoptera, sex pheromone system is highly evolved.
 Pheromone producing glands: In Lepidoptera they are produced by
eversible glands at the tip of the abdomen of the females. Aphrodisiac
glands of male insects are present as scent brushes at the tip of the abdomen. E.
g. Male butterfly. Andraconia is glandular scales on wings of male moths producing
aphrodisiacs. Aphrodisiacs are substances that aid in courtship of the insects after
the two sexes are brought together. In many cases males produce aphrodisiacs.
 Pheromone reception: Female sex pheromones are usually received by
olfactory sensillae on male antennae. In pheromone perceiving insects, the
antennae of male moths are larger and greatly branched than female moths to
accommodate numerous olfactory sensilla.
 Chemical nature of sex pheromones: In general pheromones have a large
number of carbon atoms and high molecular weight. It is a primary alcohol. It
is in slow release dispensers (rubber septa hollow fibers) that are used as lures
in traps of various designs.
 The following are some of the female sex pheromones identified in insects
Sr. No. Name of the Insect Pheromone
1. Silkworm, Bombyx mori Bombykol
2. Gypsy moth, Porthesia dispar Gyplure, disparlure
3. Pink bollworm ,Pectinophora gossypiella Pectinolure, Gossyplure
4. Cabbage looper, Trichoplusia ni Looplure
5. Tobacco cutworm, Spodoptera litura Spodolure,
6. Gram pod borer, Helicoverpa armigera Helilure
7. Honey bee queen, Apis sp. Queen’s substance
8. Spotted/Spiny bollworm Earis vitella Erilure
9. Diamond Back Moth DBM Lure
10 Brinjal shoot & fruit borer Leucinolure

 Examples of male sex pheromones

o Cotton boll weevil (Grandlure), Cabbage looper, Mediterranean fruit fly

2.) Aggregation pheromones

 A substance produces by the one or both sexes that bring both sexes together for
feeding and reproduction.
 These are released by members of one sex only but elicit responses in members of
both sexes of a species. e. g. Bark and ambrosia beetles.
 Generally found in Coleoptera & Dictyoptera order.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

3.) Alarm pheromones

 A substance produces by an insect to repel and disperse other insects in the areas.
 These pheromones are reported in Homoptera, Isoptera and Hymenoptera.
 E. g. Poison glands in ants, Cephalic glands in termites, Sting and mandibular
glands of workers bees and cornicles in aphids.
 An individual also release them when an enemy attacks.
4.) Trail pheromones
 Trail marking pheromones are substance of low persistence that are released
and perceived by individuals in trail.
 These pheromones are specially found in social insects like hymenopterans
and termites.
 The ants (Formic rufa) use formic acids as a trail marker. They facilitate
migration of colony to new site in search of food.
 Uses of pheromones
 Monitoring
 Mass trapping
 Mating disruption

 Allelochemicals

 R. H. Whittaker coined the term Allelochemicals in 1970.

 It is defined as non-nutrient substance originating from an organism (Plants &
Animals), which affect the behavior condition or ecological welfare of organisms
of another species.
 Allelochemicals affects the behavior, growth and development of an insects as
well as their natural enemies.
 Allelochemicals are divided in following sub-categories.
 Allomones
 Kairomones
 Synomones
 Apneumones

Allomones - A chemical substances produce by organisms that favourable to the emitter

but not to receiver e.g. Venon secreted by social wasps
Kairomones- A chemical substances produce by organisms that favourable to the
receiver but not to emitter.
Synomones- A chemical substances produce by organisms that favourable to the
both receiver and emitter.
Apneumones- A chemical substances produce by non-living material that favourable to
the receiving organisms but detrimental to an organisms of another species that is found
on or in non-living material.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

THE INSECTICIDES ACT, 1968

 The insecticides act was passed by the parliament of India in 1968. There were 38
sections of this act in which the sections 4, 7, 8 & 36 were enforced from 1/3/1971 and
remaining from 1/8/1971.
 An act to regulate the import, manufacture, sale, transport, distribution and use of
insecticides with a view to prevent risk to human beings on animals and for matters
connected therewith.

 Salient features of the Insecticides Act

 Compulsory registration of the product at the Central level and licenses for
manufacture, formulation and sale at state level.
 Inter – departmental / ministerial / organizational co-ordination is achieved by a
high level advisory board “Central Insecticides Board” with 24 members (to be
raised to 29 by an amendment) drawn from various fields having expert knowledge
of the subject.
 “Registration Committee” to look after the registration aspects of all Insecticides.
 Establishment of enforcement machinery like Insecticide Analysts and Insecticide
Inspectors by the Central or State Government.
 Establishment of Central Laboratory Power to prohibit the import, manufacture, and
sale of pesticides and also confiscate the stocks. The offences are punishable and size
and other penalties are prescribed. Both the Central and State Governments are
empowered to make rules, prescribe forms and fees.

 The Central Insecticides Board (CIB)

 The Central Insecticides Board advices on matters relating to:
 The risk to human beings or animals involved in the use of insecticides and
the safety measures necessary to prevent such risk.
 The manufacture, sale, storage, transport, distribution of insecticides
with a view to ensure safety to human beings and animals.
 Board members
The Director General Health Services ➜
Chairman The Drugs Controller, India
The Plant Protection Adviser to the Government of
India The Director General, ICAR
The Director General, ICMR
 Totally 24 members – others from various other fields such as BIS,
Animal husbandry, Pharmacology, Fisheries, Wild life etc

 The Registration Committee (RC)

 RC comprises a Chairman and five members. Among them are:
1. Deputy Director General, Crop Sciences, ICAR-Chairman
2. Drugs Controller, India
3. Plant Protection Adviser to the Government of India
Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati
 College of Agriculture, Baramati

 Role of RC
 To register insecticides after scrutinizing them with regard to efficacy and
safety.
 Registration of Insecticides - When applied for registration, the RC allots
a registration number within a period of 12 months. When pesticide
registered for first time in India, provisional registration for two years given
initially. After data generation full registration allowed.

 The Central Insecticides Laboratory (CIL)

 CIL carries out the analysis relating to insecticide registration and other
matters.
 Insecticide Inspectors
 Central or State Government appoints person called Insecticide
Inspector who is empowered.
 a. To enter and search premises
 b. To stop the distribution or sale or use of insecticide
 c. Take samples of insecticide and send for analysis
 The Insecticides Rules, 1971
 There are nine chapters in the insecticide rule, 1971 relating to the
functions of CIB, RC, CIL, grant of licenses, packing, labelling, first aid,
antidote protective clothing etc.,
 It has 46 rules.

 Insecticide residues and waiting period

 Residues- The toxicant that remains in the environment (like soil, water, plant
harvested produce, etc.) after the application of insecticides.
 Persistence- The duration of retention is called persistence.
 Waiting period- is the minimum period allowed between time of application of
pesticide and harvest of commodities.
 MRL (maximum residue limits) - In order to allow the toxicant residue level to
come below MRL.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Phytotoxicity and compatibility of insecticides

Phytotoxicity
 Phytotoxic means harmful or lethal to plant.
 Phytotoxicity is the degree to which a chemical or other compound is toxic to plants.
Compatibility
 Cox (1941) coined the term compatibility.
 In pest control treatment, two or more pesticides, fungicides or even fertilizers are
sprayed or applied in the same operation to minimize cost of labour.
 Before mixing two different chemicals, their physical and chemical properties
should be well understood.
 Incompatible pesticides should not be mixed. Only compatible pesticides can
be mixed.
 When two or more ingredients a successful spray or dust mixture they are said
to be complete.
 Incompatibility of pesticides may be of following types
Chemical incompatibility
Chemical compounds in the two pesticides react with another producing a different
compound, reducing the pesticidal activity of the pesticides (Degradation of active
ingredient).
Biological incompatibility (Phytotoxic incompatibility)
The mixed product exhibit phytotoxic action, which independently is not phytotoxic.
Physical incompatibility
The physical form of the pesticides change, and one of them become unstable or
hazardous for application.
 Gray (1914) worked on pesticides combination and also he divided the mixtures
of insecticides and fungicides into 5 classes designated by letters A-I, A, B, C,
and D.
 Insecticides mixtures: -
 Recently combination of insecticides are recommended to control insect pest
which are resistant to major pesticides that are used commonly because these
insecticides mixtures are usually prepared which have different modes of action
i.e. organophosphates or carbamates with synthetic pyrethroids so that the
development of resistance to these combinations is extremely rare but they are not
prepared by combining organophosphates and carbamates which have same mode of
action.

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 College of Agriculture, Baramati

Table of insecticides mixture

Sr. No. Insecticides Trade Name
1 Chlorpyriphos 50% EC + Cypermethrine 5% Nurelle D 505
EC
2 Profenophos 40% EC + Cypermethrine 5% EC Polytrin C 44EC
3 Chlorpyriphos 16% EC + Alphamethrin 1% Duet 17 EC
EC
4 Deltamethrin 1% EC + Triazophos 35% EC Spark 36 EC
5 Ethion 40% EC + Chlorpyriphos 5% EC Nagata 45 EC

First aid: In cane of suspected poisoning; call on the physician immediately. Before
calling on a doctor, first aid treatments can be done by any person.

 Swallowed poison -
 During vomiting, head should be faced downwards.
 Stomach content should be removed within 4 h of poisoning.
 To give a soothing effect, give either egg mixed with water, gelatin,
butter, cream, milk, mashed potato.
 In case of nicotine poisoning, give coffee or strong tea.
 Skin contamination -
 Contaminated clothes should be removed.
 Thoroughly wash with soap and water.

 Inhaled poison -
 Person should be moved to a ventilated place after loosing the tight cloths.
 Avoid applying frequent pressure on the chest.

 Antidotes :-
 Definition: - The substances that are used to cure the cases of insecticidal
poisoning are known as antidotes.
 There are two types of antidotes;
1.) Universal Antidotes - It contains 2 parts of activated charcoal + 1 part
of magnesium oxide + 1 part of tannic acid + ½ glass of warm water.
 It is useful for acids and heavy metal poisoning.
2.) Specific Antidotes - Which varies with toxicant as follows;

Dr. A. D. Gonde, Asstt. Prof. of Entomology, College of Agriculture, Baramati

 COLLEGE OF AGRICULTURE, BARAMATI
Antidotes and other medicine for treatment in pesticide poisoning
S. Antidote / Medicine Used in poisoning due to
1. Common salt (Sodium chloride) Stomach poison in general
2. Activated charcoal (7g) in warm Stomach poison in general
Magnesium oxide (3.5g) water
Tannic acid (3.5g)
3. Gelatin (18 g in water) or Flour or milk Stomach poison in general
power (or) Sodium thiosulphate
4. Calcium gluconate Chlorinated insecticide, Carbon
tetrachloride, ethylene
dichloride, Mercurial compound
5. Phenobarbital (or) Pentobarbital Stomach poison of
intravenous administration chlorinated hydrocarbon
6. Sodium bicarbonate Stomach poison of
organophosphate
7. Atropine sulphate (2-4 mg intramuscular Organophosphate Compounds
/ intravenous administration) or PAM
(Pyridine-Z aldoxime-N-methliodide)

8. Atropine sulphate (2-4 mg Carbamates

intramuscular / intravenous
administration)
9. Phenobarbital Synthetic pyrethoid
10. Potassium permanganate Nicotine, Zinc phosphide
11. Vitamin K1 and K2 Warfarin, Zinc phosphide

12. epinephrine Methlyl bromide

13. Methyl nitrite ampule Cyanides

Dr. A. D. Gonde, Asstt. Prof. of Agril. Entomology, College of Agriculture, Baramati