Scribd
Upload
51 views

UPS Power Systems With Generator Sets: Your Reliable Guide For Power Solutions

This document discusses UPS power systems and how they interface with generator sets. It begins by explaining that UPS systems provide uninterrupted power when primary power is interrupted until backup power comes online. System designers must consider factors like load duration, power needs, and the load being protected to select the appropriate UPS system. The document then outlines the key principles of battery-based and mechanical UPS systems, providing examples of each. It concludes by listing some common applications that require UPS systems like communications, life support, and data systems.

Uploaded by

solomon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
51 views

UPS Power Systems With Generator Sets: Your Reliable Guide For Power Solutions

This document discusses UPS power systems and how they interface with generator sets. It begins by explaining that UPS systems provide uninterrupted power when primary power is interrupted until backup power comes online. System designers must consider factors like load duration, power needs, and the load being protected to select the appropriate UPS system. The document then outlines the key principles of battery-based and mechanical UPS systems, providing examples of each. It concludes by listing some common applications that require UPS systems like communications, life support, and data systems.

Uploaded by

solomon
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Your Reliable Guide for Power Solutions

UPS Power Systems with Generator Sets


Information Sheet # 11

1.0 Introduction
Uninterrupted Power Supplies (UPS) are what their name implies. If power to an electrical circuit is interrupted, UPS systems provide continuous
power to the circuit until backup power comes on line or primary power is restored.
This information sheet discusses types of UPS systems, how they operate, the electrical loads that require UPS devices, and how the devices
interface with standby power systems.
2.0 System Designers Considerations for UPS Systems
Generator systems designers must consider the consequences of any interruption of power to an electrical circuit and whether that interruption can
be tolerated. Traditional engine-driven standby generator systems can take several seconds to come online and carry a full load. These brief outages
often are merely inconvenient, but in some cases, they may be life threatening or economically devastating.
A system designer must evaluate the following factors to select an appropriate UPS system:
Duration: Traditional engine driven systems take several seconds to start and fully load, even when the load is switched through an automatic
transfer switch (ATS) with sensors that automatically detect power outages. If backup power is not automatically transferred, a larger UPS system
needed to cover the additional time required to manually start backup power may cost more than a smaller system with an automatic standby.
Power: The power required to bridge the gap between losing main power and switching to backup power is vital to determine which UPS system
is needed. Purely electrical systems will handle many loads, but electromechanical systems may be needed for larger loads.
Load: Not all parts of a circuit’s electrical load may be critical enough to require a UPS system. The system designer can isolate the critical parts
and fit a UPS system to the sectors of the circuit that connect those parts.
2.0 Key principles of operation and types of UPS systems:
When a power outage occurs, the UPS device must immediately provide uninterrupted power to the critical load. This requires the UPS device to
always be connected to the circuit and to have enough independent power to supply the load until main or backup power is restored.
Power Reserve: The most commonly used form of stored electrical energy is the battery. UPS systems that use batteries must convert the DC
power in batteries to the AC power required by the utility system.
The kinetic mechanical energy in a rotating flywheel also can be used to power UPS systems. Some large devices use this stored energy to continue
turning generators while power is interrupted.
Connection: A mechanical UPS system can be connected directly to the electrical circuit as another AC power source. An electrical UPS system
using batteries for backup power has to be connected to the electrical circuit via an inverter. An inverter is a device that uses electronics such as
thyristors to convert DC power to AC Power.
Whether mechanically or electrically powered, a UPS device must be an integral part of the protected circuit and not switched through other
contacts, such as with an automatic transfer switch to a standby generator. (Continued over)

To fulfill our commitment to be the leading supplier and preferred service provider in the Power Generation Industry, the
Central Power Systems & Services team maintains up-to-date technology and information standards on Power Industry
changes, regulations and trends. As a service, our Information Sheets are circulated on a regular basis, to existing
and potential Power Customers to maintain awareness of changes and developments in engineering standards, electrical
codes, and technology impacting the Power Generation Industry.
The installation information provided in this information sheet is informational in nature only, and should not be considered the advice of a properly licensed and qualified electrician or used in place of a detailed review of the applicable National
Electric Codes and local codes. Specific questions about how this information may affect any particular situation should be addressed to a licensed and qualified electrician.
www . cpower .com

Liberty - Corporate Office


9200 Liberty Drive
Liberty, MO 64068
816.781.8070 Ph
816.781.2207 Fax

Liberty, MO Branch
1900 Plumbers Way
Liberty, MO 64038
816.415.6700 Ph
816.415.6767 Fax

Springfield, MO Branch
3100 E. Kearney
MO 65803
417.865.0505 Ph
417.865.4304 Fax

Wichita, KS Branch
4501 W. Irving
KS 67209
316.943.1231 Ph
316.943.4560 Fax

Salina, KS Branch (Continued from page-one)


1944B N. 9th St.
KS 67401 3.0 Battery and mechanical UPS systems:
785.825.8291 Ph The selection of a UPS device depends on economics, size and reliability. Advancements in electronics have reduced the
785.825.8282 Fax
costs of inverters considerably. The most common UPS devices now use batteries to provide uninterrupted power when
switching between primary and backup systems.
Mechanical systems have also made technical advancements. While they tend to provide smaller periods of uninterrupted
Great Bend, KS Branch
625 E. 10th St. power mechanical systems require less maintenance and are more environmentally friendly than battery systems.
KS 67530 4.0 Battery/Inverter System (Diagram One)
620.792.1361 Ph
620.792.1364 Fax In this system, a bank of batteries sized to provide sufficient UPS power are kept in a fully float-charged condition by a
rectifier connected to the AC input. When power is interrupted, the battery’s DC power is converted by an inverter into
the AC power required by the load connected to the protected circuit. Battery systems are commonly used for loads below
Colby, KS Branch 120kW. The cost of batteries required for larger loads favor the selection of mechanical systems.
1920 Thielen Ave.
KS 67701
5.0 Flywheel/Motor System (Diagram Two)
785.462.8211 Ph This system was more common before advances were made in electronics and battery technology. Now it is used primarily
785.462.8286 Fax
on larger systems. A mechanical UPS system uses an electric motor driven from the AC power supply to turn a flywheel.
The flywheel size is determined by the amount of kinetic energy necessary to turn the AC generator that feeds power to
the UPS protected part of the electrical circuit. Manufacturers now offer smaller compact systems with a flywheel turning
Liberal, KS Branch at a high speed for more kinetic energy.
1150 E. Hwy. 54
KS 67901 6.0 Typical applications of UPS systems
620.624.7274 Ph
620.624.7277 Fax In the electronic world we live in, relying on UPS devices has become very common place, from a simple plug-in systems
for your PC to the back-up power needed for main frame computer systems. Examples of the application of UPS devices/
systems are:
Woodward, OK Branch
Communications: Phone and internet providers have installed UPS systems so that there is zero interruption to
127 NW Hwy. 270 communications.
OK 73801
580.256.6014 Ph Life support systems: Advances in medical technology have made us more reliant on critical life support systems that
580.256.0314 Fax have zero tolerance for power interruptions.
Aviation support: Critical systems for air traffic control must be assured a constant uninterrupted power supply.
Security systems: Constant surveillance without periods of black out.
Data systems: Uninterrupted power while key data is recorded, backed up and restored.
7.0 UPS maintenance issues
As an UPS system must be constantly connected, it should only be shut off if vital loads have an alternative UPS system or a
power interruption is not critical during the planned shut off time . Batteries are a key item to be maintained as instructed
by the manufacturer.

CPSS-INFO#11 2013 PLC Enterprises, LLC

You might also like