Shenzhen Keyable Technology Co., Ltd www.keyable.com.

cn

Face Recognition Terminal

Web browser setting
(for WindowsXP/2003/Win7/Vista/Win8/Win10)

Statement:

● The contents described in this manual may differ from the version you are using. If
you encounter any unresolved problems when using this manual, please contact our
technical support department or productsupplier
.
● The contents of this manual will be updated from time to time, and the company
reserves the right to leave it without notice.

Reader :
This manual is intended for the following engineers:

● System planner

● On-site technical support and maintenancepersonnel

● Administrator responsible for system installation, configuration, and maintenance

● Users who perform product function businessoperations

The manual promises:

● Click: Click with the left mouse button.

● Double-click: Double-click with the left mouse button.

● The square brackets "[]" indicate the window name, menu name, and data table, such
as [Download Address].
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

Catalog
1、System login and logout......................................................................................................4
2、system management.......................................................................................................... 5
2.1 System parameters......................................................................................................... 5
2.1.1 Opening conditions................................................................................................. 5
2.1.2 Notify sound and interface..................................................................................... 7
2.1.3 Login Password....................................................................................................... 9
2.1.4 System Information and IP Address..................................................................... 9
2.1.5 Center Connection................................................................................................ 11
2.1.6 System Time.......................................................................................................... 12
2.1.7 Face IP Camera Parameter Settings................................................................. 13
2.1.8 File Upgrade.......................................................................................................... 14
2.1.9 Factory default.......................................................................................................14
2.1.10 Equipment Maintenance..................................................................................... 15
2.1.11 System Parameter Settings................................................................................ 16
2.2 System Log....................................................................................................................17
3、List management.............................................................................................................. 18
3.1 List management.......................................................................................................... 18
3.2 Batch Import................................................................................................................. 21
4、Capture records................................................................................................................ 22
5、Control records.................................................................................................................. 23
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

1、System login and logout

Enter the device IP address in the address bar of the IE browser (device default IP:
192.168.2.10), press Enter to open the login page:

Enter the username and password (default is admin), click Login to log in to
the device IE parameter settings page:

You can exit to the login page by clicking the Exit button in the top right corner of the page.
If you have forgotten your password, please contact our technical support department.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2、System management
2.1.1 System parameters

Opening conditions
Opening condition setting page is as shown below:

【Way of Door Open】

【1. Face open】Regularly open the door, choose this method, pass the white
list directly, and swipe the ID card to pass.

【2. Remote open】Select this method, you can normally compare, but will
not open the door, nor will you record the control record. You need to open the door
through the docked platform end control.

【3. Face/remote open】The two methods coexist and can be controlled at the
same time.

【Black/white list verify limit】This item is the threshold for opening the list
and face verification. Verify the type of opening the door and select “White List +
Face Verification Open”. When the scene captures the face and the whitelist, the
similarity reaches the set value (default 90, the recommended setting is not
lower than 90, when the number of the list is large, it is recommended to set the
threshold above 95), then the verification can be successfully opened.

【 ID verify Door limit 】 The verification of the person's identity and the
verification threshold, when the face extracted from the ID card and the face
captured on the scene are up to the set value (default 50, the recommended
setting is not less than 90), the verification can be successfully opened.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

【Whitelist + face verify open】1:N comparison method, That is, the on-site
personnel and the personnel in the list library Line comparison.

【Whitelist + face verify opening】This way of comparison requires ID cards to be

consistent with people.

【Whitelist + ID + Face Verify opening】ID cards, whitelists, and on-site

captures of faces must be consistent.

【Whitelist or ID card + face Verify opening】Whitelist + face verification

open, whitelist + face verification open the door simultaneously.

【Control interface】
【1.Switch】KZ_OUTA +/ KZ_OUTB -Hardwareconnecteddeviceleads,
verification can be successfully opened (except blacklist).

【Hold time】The length of time the door open signal is maintained, both
the switch and the Wiegand interface control mode are subject to this.

【2. Wiegand interface】The Wiegand protocol is used to send the open

signal, and the hardware is connected to the WG lead of the device. The wiring
sequence is: 1-+12V, 2-ground, 3-D0, 4-D1.

【Wiegand protocol】Supports Wiegand 26 bit and 34 bit

【Door Access Common card】is used for the authentication method of

the person's card. When the ID card and the face verification are successful,
and the Wiegand interface is selected, the card number is sent to the control
panel. The value ranges from 1 to 4294967295.

【 Range of Card Number 】 When the list is added, the automatic

generation mode is valid. The access card number is incremented by the
starting range +1, and the value range is 1~4294967295.

【Wiegand +Switching value】These two kinds of

simultaneous support can be controlled at the same
time. Click the [Save] button and the settings will
take effect.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.2 Notify sound and interface

The page setting items of the notify sound and interface are as shown below:

【Volume】Set the sound vaule of the voice broadcast.

【Sound Notify When Verify Success】Check this box, whitelist personnel

or swipe ID card, when the verification is passed, the device will play the “please
pass” voice prompt.

【Sound Notify When Verify Failure】Check this box. When the blacklist is
successfully verified, the device will play the “No Pass” voice prompt..

【Sound Notify When Remote Control】Check this box to control voice playback
through the docked platform.

【Gui Notify When Verify Success】Check this box, whitelist personnel or

swipe ID card. When the verification is passed, the text on the local interface of the
device prompts “XXX, please pass!”.

【 Gui Notify When Verify Failure 】 Check this box. When the blacklist is
successfully verified, the text on the local interface of the device prompts “No access!”
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

【Title Display】Check this box to display the title “Face Recognition

Integrated Machine” on the local side of the device.

【Version Display】Check this box to display the current device major version
number in the lower left corner of the device local area, such as:V4.0.6.

【System Date Display】Check this box to display the device date in the lower
right corner of the device local area.

【System Time Display】Check this box to display the device time in the lower
right corner of the device.

【Verigy Successful Gui Display】Select the captured image. When the

verification is successful, the local face image of the device displays the face
captured on the spot. Select the registered avatar. When the verification is
successful, the local face image of the device indicates the registered avatar. ,
click the [Save] button, the settings will take effect.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.3 Login Password

The login password setting page is shown below:

The password supports English letters + numbers, and the

total length is no more than 63 characters. Click the [Save]
button and the settings will takeeffect.

2.1.4 System Information and IP Address

The system information and IP address parameter setting page is as shown below:
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

[Title] Supports mixed Chinese and English numbers, does not support special
characters, and has a maximum of 63 characters.

[Device ID] The serial number of the device, which cannot be changed.

[Version] The current version number of the device, only for display.

[Build time] The time when the current version number of the device is generated is
displayed only.

[Web port] default 80, it is recommended not to modify.

[IP Address] Set the device login IP of the face recognition device, the default is
192.168.2.10.

[Subnet mask] The default is 255.255.255.0, it is recommended that customers do

not modify.

[Gateway] Set the gateway IP of the face recognition device. For example, when the
device wants to access the public network through the router, the gateway IP is set
to the router IP that accesses the public network.

[DNS] To use the DDNS (Dynamic Domain Name Resolution) function, you need to
correctly set the DNS address of the device to the DNS address of the device. For
example, the available DNS in Shenzhen is 202.96.128.86. When using the DDNS
function in non-Shenzhen area, Please change to the local DNS.

Among them: the default DNS is used by default, and the alternate DNS does not take
effect at present. Click the [Save] button and the settings will take effect.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.5 Center connection

The center connection parameter setting page is as shown below:

[Server Address] The address of the monitoring center, such as: Face II

Intelligent

Management Center server address, as shown in the figure 172.168.2.65.

[Center port] Monitoring center, such as 6023.

[User Name] User name of the monitoring center, default admin, up to 30

characters.

[Password] Password of the monitoring center, default admin, up to 30

characters.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.6 System time

The system time setting page is shown below:

[Time Zone] Click to select the time zone.

[Server url] The address of the NTP server, the default clock.isc.org. If you pass the
server address, you need the device to access the Internet and the server works
normally.

[Server Port] The port of the NTP server, the default is 123.

[Timing Interval] How often the NTP server is in school, in hours, at least 1 hour.

[Device Time] Shows the current real-time time of the device after time
synchronization.

[Setup] Set the time of the device manually.

[Sync with local computer] Check this box to synchronize the time with the PC time of
the currently logged in device. Click the [Save] button and the settings will take effect.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.7 System time

The system time setting page is shown below:

[Time Zone] Click to select the time zone.

[Server url] The address of the NTP server, the default clock.isc.org. If you pass the
server address, you need the device to access the Internet and the server works
normally.

[Server Port] The port of the NTP server, the default is 123.

[Timing Interval] How often the NTP server is in school, in hours, at least 1 hour.

[Device Time] Shows the current real-time time of the device after time
synchronization.

[Setup] Set the time of the device manually.

[Sync with local computer] Check this box to synchronize the time with the PC time of
the currently logged in device. Click the [Save] button and the settings will take effect.

2.1.8 FaceParrameterSetup
The face parameter setting page is shown below:

This option is to set some parameters of the face recognition machine inside the face
recognition machine. Some parameters can be set through the current page. For more
parameter settings, please click [IPC More Settings] to log in to the IE operation page of
the face capture machine for configuration.
Click the [Save] button and the settings will take effect.

Note: When you click [IPC More Settings] to log in to the IE operation page of the face
capture machine, do not modify the parameters in the [Wired Network Parameters] of IPC.
Otherwise, the integrated machine cannot connect to the video.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.9 Upgrade
The file upgrade page is shown below:

Click [Upgrade], select the IE upgrade package (such as FaceGate-4061040-

IE.tar) of the firmware to be upgraded in the upgrade box that pops up, click
[Upgrade], and the upgrade completion page will prompt “Upgrade Successful”.

Note: After the upgrade is successful, the software will automatically restart. After the upgrade is
complete, please clear the browser cache, wait two minutes and re- login the device.

2.1.10 Restore factory default

Restore factory default page is shown below:
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

Check the settings to be restored to the factory, click [Save], the settings
will take effect.
Note: After the "name and ip address" or "capture record" or "list
registration record" or "control record" is restored to the factory, the application
software will restart!

2.1.11 Device Maintain

The device maintenance settings page is as shown below:

[Reboot Maintain] Click to select the time to be maintained. After selecting the time, the
application software will automatically restart the maintenance at the set time.

[Reboot] Restart the application software manually.

[Shutdown] Manually turn off the device, that is, the entire system will be turned off; manually
turn off the device before the device is powered off, wait for the device to be turned off and
then power off.

Click the [Save] button and the settings will take effect.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

2.1.12 System Parameter Setup

System Parameter setup payge is shown below:

[Language] Click to select the system language. After saving, the software will
restart.

[ID card reader type] is divided into type one, type two, and the type of supported
card reader, please consult our technical support department.

[Whether display the face frame] Check the box, when there is a face on the GUI,

the face recognition frame will besuperimposed.

[Enable Human detection] Whether the Human detection function is enabled or

not, the device needs to support the living body detection function; the non-living
device does not have this parameter.

[Human Threshold] When a human face is detected, it is determined whether the

face is a living body threshold value, and the device needs to support the living
body detection function; the non-living device does not have this parameter.

[Continuous Human frame Number] When a human face is detected, if the value

of the in-vivo threshold is greater than or equal to the value in the [Active
Threshold] setting item, it will be determined whether the number of
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

consecutively obtained frames has reached this value.

when [Human Threshold 】and【Continuous Human frame number】 reaching

the set value, it will be considered as a living human body, and the terminal
device needs to support the living human body detection function; the non-living
device does not have this parameter.

Click the [Save] button and the settings will take effect.

2.2 System Log

System log page is shown below:

Log search conditions: time + data type.

[Data Type] Parameter setting, add list, delete list and system information; the
system has a maximum of 512 records, more than 512, and automatically
deletes the early records.

Select the time range and data type to be queried, and click [Search].
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

3、List management
3.1 List management setting page is shown below:

[Add name] Click Add List, open the Add List window, click [Upload], select the picture
of the person to be added, click [Submit]--[Save] list to add successfully:
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

[Search] Finds the added list.

[Batch Delete] To delete a batch of batches in batches, you need to perform a list
search first.
[Search way] Condition search, name fuzzy search, duplicate ID number search,
and duplicate access card numbersearch.
[Conditional Search] Search according to the set time range, type, gender, age
range and access card number; when the access card number is 0, this item
does not work.
[Name Blur Search] Enter the name of the person to be searched, and the
software will list the matching personnel information; the time, type, gender, age
range and access card number size will not be judged at this time.
[Repeat ID Number Search] Find out the list of people who have the same ID
number.
[Renamed Access card Number Search] Find the list of people who have set the
same access card number.
[Edit List] Double-click the list to edit and delete the list.
[Type] whitelist, blacklist; whitelist can open the door.
[Name] Maximum 10 Chinese.
[Gender] Click to select men and women.
[Nationality] Click to select the nation.
[Type of Certificate ] Currently only supports ID cards.
[ID number] supports up to 31 characters.
[Date of birth] Click to set the date and time. The date setting cannot be greater
than the current time. Otherwise, the corresponding list cannot be found by the
condition.
[Telehone number] supports up to 31 characters.
[Birth place] The maximum 10 Chinese.
[Address] Up to 23 Chinese / 71 characters.
[Remarks] Up to 21 Chinese / 61 characters.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

[Access card ] There are three types of public card number, automatic
generation, and manual input. When the [opening condition] selects the
switching interface of the control interface, there is no setting item of [access
card number generation mode] when adding the list.

[Public card number] Select this method, and the obtained card number size is
the access control public card number set in [Open Door Condition].

[Automatic Generation] Select this method, and the obtained card number is
automatically generated. The starting card number is the starting range of the
range when the access card number is automatically generated in [Opening
Conditions].

[Manual input] Select this mode, you can manually enter the card number size,
range 1~ 4294967295.

[List type] There are three types: permanent list, temporary list, temporary list,
and temporary list. The temporary list and temporary list 2 can be set for a
period of time. The list has the right to open the door. The temporary list 3 can
be set to a limited number of times. 4294967295; The system will be
automatically cleared after the temporary list expires.

Note: 1. The length of each parameter in the list is limited. When the list is added
to other clients, if there is more than the limit or abnormal characters, the list
cannot be searched on IE, prompting XML error. 2. The resolution of the added
person image is not greaterthan 1920*1080.
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

3.2 List import

The batch import parameter setting page is shown below:

[Refresh] Click to refresh the page.

[Batch Import] Batch import list, with a maximum of 64 simultaneous importes. When
importing batches, you can set the type, access card number generation mode,
access card number, and list type. After the selection is completed, click Submit to
wait for the list to be imported and it will be displayed in the class table

Double-click the list to edit and delete the list.

Note: If the batch import quantity is large, please contact our technical support
department to provide corresponding tools (FaceGateApp, FaceGateTool) for batch
import. FaceGateApp and FaceGateTool are imported in batches. For details, see
Appendix A at the back of this document
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

4、Capture Record
Capture Record page is shown below:

Select the time range to be queried, and click [Query] to get the total number of snapshots.

5、Control Record
Control Record page is shown below:
Shenzhen Keyable Technology Co., Ltd www.keyable.com.cn

[Search] Search the added list.

[Search way] Condition search, name fuzzy search.

[Conditional Search] Search according to the set time range, type, gender, age

range and access card number; when the access card number is 0, this option

does not work.

[Name blur Search] Enter the name of the person to be searched. The software

will list the matching personnel information. At this time, the time, type, gender,

age range and access card number size will not be judged.