Scribd
Upload
266 views

Lathe and VMC Cycle Time Calculator

The document provides information about cutting speeds, RPMs, tool numbers, and machining operations for turning, boring, milling, and drilling steps. It includes the diameter, RPM, feed per tooth, feed rate, length to machine, number of cuts, and number of parts for each operation. It also lists the complete length to be machined, machining time, rapid time, tool change indexing time, and total time for each operation.

Uploaded by

chandra shekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
266 views

Lathe and VMC Cycle Time Calculator

The document provides information about cutting speeds, RPMs, tool numbers, and machining operations for turning, boring, milling, and drilling steps. It includes the diameter, RPM, feed per tooth, feed rate, length to machine, number of cuts, and number of parts for each operation. It also lists the complete length to be machined, machining time, rapid time, tool change indexing time, and total time for each operation.

Uploaded by

chandra shekar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Cutting speed to RPM

Vc
Diam
RPM

Cutting
Op Pos Tool Number Operation
Speed

TURNING
10 TURNING Turning OD - Rough 250
10 Turning OD - Finish 250
10 BORING Bore Rough- 2 passes (finish in 2nd spindle) 250

3-AXIS VMC with pallet changer


20 MILLING Milling lock pin bore 250
20 Milling bottom of lock pin bore 125
20 DRILLING drll for M8 80
Cutting speed to RPM RPM tp cutting speed
314 m/min RPM 2000 rev/min Need user input
50 mm Diam 50 mm
2000 rev/min Vc 314.2 m/min

N of
Feed per Feed per Feed Length to Nº of
Diameter RPM inserts / Nº of cuts
tooth rev mm/min machine parts
tooth

50 1592 0.22 1 0.22 350 16 1 1


45 1768 0.2 1 0.2 354 16 1 1
50 1592 0.2 1 0.2 318 13 2 1

8 9947 0.02 3 0.06 597 40 1 1


4 9947 0.01 3 0.03 298 30 1 1
7 3638 0.15 1 0.15 546 13 6 1
FOR FACING AT CONSTANT SPEED
Complete Tool
Rapid Tool change
length to be Machining time
time Indexing time
Breakage CT
machined detection

16 2.74 1 0.00 0.00 3.74


16 2.71 1 0.00 0.00 3.71
26 4.90 2 2.00 0.00 8.90

FOR TAPPING
40 4.02 1 2.00 0.00 7.02
30 6.03 1 2.00 0.00 9.03
78 8.58 6 2.00 0.00 16.58

You might also like