* * 360 SERIES * *

* * ENGINEERING CODEBOOK * *
____________________

THROUGH THE USE OF THIS CATALOG ALL THE COMPONENT PARTS OF ANY PERMCO PUMP OR MOTOR
CAN BE DETERMINED EXCLUDING FASTENERS.

THE FOLLOWING IS THE CODE BOOK FOR THE 360 SERIES.

EACH MODEL SERIES IS DIVIDED IN THE FOLLOWING MANNER:

I. SHAFT END COVERS FOLLOWED BY SHAFT END COVER SMALL PARTS.

II. PORT END COVERS FOLLOWED BY PORT END COVER SMALL PARTS.

III. GEAR HOUSINGS FOLLOWED BY:

A. GEAR HOUSING SMALL PARTS.
B. GEARS.

IV. GEAR/SHAFTS FOLLOWED BY DRIVE SHAFT SMALL PARTS.

V. BEARING CARRIERS FOLLOWED BY BEARING CARRIER SMALL PARTS.

VI. CONNECTING SHAFTS.

COPYRIGHT C NOVEMBER 2005 BY PERMCO,INC. ALL RIGHTS RESERVED. NO PART OF THIS BOOK MAY BE
REPRODUCED STORED IN A RETRIEVAL SYSTEM OR TRANSMITTED IN ANY FORM OR BY ANY MEANS
ELECTRONIC MECHANICAL PHOTOCOPYING RECORDING OR OTHERWISE
WITHOUT PRIOR WRITTEN PERMISSION OF PERMCO, INC.
 BELOW IS AN EXAMPLE OF HOW TO USE THIS CATALOG:

SINGLE ASSEMBLY CODE: P360A067DJZA20-00

TANDEM ASSEMBLY CODE: P360B067AHZA20-00BCZA10-1

P DENOTES PUMP (M DENOTES MOTOR)

360 SERIES

A B C OR L MODEL TYPE (A-SINGLE B-TANDEM C-CONTINENTAL SHAFT

AND L-EXTENDED STUDS)

067 SHAFT END COVER

DJ PORT END COVER

ZA20 GEAR HOUSING (FIRST)

00 DRIVE SHAFT
____________________________________

BC BEARING CARRIER

ZA10 GEAR HOUSING (SECOND)

1 CONNECTING SHAFT

THE ROTATION OF ANY UNIT IS IDENTIFIED BY THE FIRST DIGIT OF THE SHAFT END COVER CODE
(SEE INDIVIDUAL SERIES COVER PAGES). THE GEAR SIZE IS DENOTED BY THE TWO (2) DIGITS
IN THE GEAR HOUSING CODE.

CODE. . . . . : 05 07 10 12 15 17 20 22 25
SIZE IN INCHES: 1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 2-1/2

ROTATION IS VIEWED LOOKING AT SHAFT END (SHAFT ON TOP.)

AN ASTERISK (*) DENOTES EITHER OBSOLETE OR SPECIAL. PLEASE CONSULT FACTORY AS THEY
MAY BE REPLACED BY OTHER STANDARD ITEMS.
 * * ABREVIATIONS USED IN PART DESCRIPTIONS * *

SHAFT END COVER DESCRIPTIONS PORT END COVER DESCRIPTIONS

FT MT FOOT MOUNT OS PORTS ARE OUT THE SIDE

G F TOP GREASE FITTING ON TOP (OTHERS ON BOTTOM) PB PIGGYBACK PUMP

PAD MT PAD MOUNT XSD EXTENDED STUDS

PB PIGGYBACK PUMP

PD PILOT DIAMETER SHAFT DESCRIPTIONS

__________________
PX PILOT EXTENSION
T TOOTH
RD FLG ROUND FLANGE
PB PIGGYBACK PUMP
W/MTG SLT WITH MOUNTING SLOT
W/THD END WITH THREADED END
WD WITH DRAIN

WD2 WITH DRAIN AT 2 OCLOCK POSITION

WD8 WITH DRAIN AT 8 OCLOCK POSITION

WD12 WITH DRAIN AT 12 OCLOCK POSITION

W2D WITH 2 DRAINS

PORTING DESCRIPTIONS

JIC STRAIGHT THREAD. PORT SIZE REFERS TO O.D. OF TUBE.

SF SPLIT FLANGE PORTS. PORT SIZE REFERS TO FLANGE HOLE DIAMETER.

T INTERNAL CONNECTIONS TO FRONT & BACK SECTION.

B CONNECTION TO BACK SECTION.

F CONNECTION TO FRONT SECTION.

 *****************
* *
* 360 SERIES *
* *
*****************

SERIES IDENTIFICATION

STUD HOLES - 4 AT 5/8 DIAMETER

STUD DIA. - 5/8 IN.
ONE-PIECE DRIVE SHAFT AND GEAR (INTEGRAL)
HOUSING HEIGHT – 6-1/4 INCHES
HOUSING WIDTH - GEAR SIZE + 1/2 INCH
PUMP BOLT TORQUE - 250 FT-LBS

GEAR WIDTHS AVAILABLE

1/2 3/4 1 1-1/4 1-1/2 1-3/4 2 2-1/4 AND 2-1/2 INCH

SHAFT END COVERS

THE FIRST DIGIT OF THE SHAFT END COVER CODE DESIGNATES PUMP/MOTOR ROTATION.

CW CCW DBL PUMP MOTOR BEARING

ALL CODES BEGINNING WITH 0 XX XX
1 XX XX
3 XX XX XX
4 XX XX XX
7 XX XX XX
8 XX XX

HOUSINGS

1. JIC PORTS ARE RECOMMENDED FOR USE AT PRESSURES UP TO 2500 PSI.

FOR HIGHER PRESSURES CONSULT FACTORY.
2. SPLIT FLANGE PORTS ARE RECOMMENDED FOR PRESSURES ABOVE 2500 PSI.
CONSULT FACTORY FOR CORRECT PORTING.
PERMCO MODEL: 360 Shaft End Covers
CODE QTY PART NUMBER D E S C R I P T I O N
031 1 574-01389 360 'B' SEC 4-BLT CW
067 1 574-01382 360 'C' SEC 4-BLT CW
079 1 574-01435 360 'D' SEC 4-BLT CW
086 1 574-01607 360 'B' SEC 2-BLT CW
087 1 574-01605 360 'C' SEC 2-BLT CW

131 1 574-01389 360 'B' SEC 4-BLT CCW

167 1 574-01382 360 'C' SEC 4-BLT CCW
179 1 574-01435 360 'D' SEC 4-BLT CCW
186 1 574-01607 360 'B' SEC 2-BLT CCW
187 1 574-01605 360 'C' SEC 2-BLT CCW

331 1 574-01389 360 'B' SEC 4-BLT CW

367 1 574-01382 360 'C' SEC 4-BLT CW
379 1 574-01435 360 'D' SEC 4-BLT CW
386 1 574-01607 360 'B' SEC 2-BLT CW
387 1 574-01605 360 'C' SEC 2-BLT CW

431 1 574-01389 360 'B' SEC 4-BLT CCW

467 1 574-01382 360 'C' SEC 4-BLT CCW
479 1 574-01435 360 'D' SEC 4-BLT CCW
486 1 574-01607 360 'B' SEC 2-BLT CCW
487 1 574-01605 360 'C' SEC 2-BLT CCW
PERMCO MODEL: 360 SHAFT END COVER SMALL PARTS
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
031 2 921-01380 360 BUSHING 379 2 921-01380 360 BUSHING
031 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 379 1 W85-315 360, 7500 SNAP RING
379 1 W58-48 360, 7500 BALL BEARING
067 2 921-01380 360 BUSHING 379 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
067 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
386 2 921-01380 360 BUSHING
079 2 921-01380 360 BUSHING 386 1 W85-315 360, 7500 SNAP RING
079 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 386 1 W58-48 360, 7500 BALL BEARING
386 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
086 2 921-01380 360 BUSHING
086 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 387 2 921-01380 360 BUSHING
387 1 W85-315 360, 7500 SNAP RING
087 2 921-01380 360 BUSHING 387 1 W58-48 360, 7500 BALL BEARING
087 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 387 1 W62-26-10 360, 7500 DOUBLE LIP SEAL

131 2 921-01380 360 BUSHING 431 2 921-01380 360 BUSHING

131 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 431 1 W85-315 360, 7500 SNAP RING
431 1 W58-48 360, 7500 BALL BEARING
167 2 921-01380 360 BUSHING 431 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
167 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
467 2 921-01380 360 BUSHING
179 2 921-01380 360 BUSHING 467 1 W85-315 360, 7500 SNAP RING
179 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 467 1 W58-48 360, 7500 BALL BEARING
467 1 W62-26-10 360, 7500 DOUBLE LIP SEAL
186 2 921-01380 360 BUSHING
186 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 479 2 921-01380 360 BUSHING
479 1 W85-315 360, 7500 SNAP RING
187 2 921-01380 360 BUSHING 479 1 W58-48 360, 7500 BALL BEARING
187 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 479 1 W62-26-10 360, 7500 DOUBLE LIP SEAL

331 2 921-01380 360 BUSHING 486 2 921-01380 360 BUSHING

331 1 W85-315 360, 7500 SNAP RING 486 1 W85-315 360, 7500 SNAP RING
331 1 W58-48 360, 7500 BALL BEARING 486 1 W58-48 360, 7500 BALL BEARING
331 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 486 1 W62-26-10 360, 7500 DOUBLE LIP SEAL

367 2 921-01380 360 BUSHING 487 2 921-01380 360 BUSHING

367 1 W85-315 360, 7500 SNAP RING 487 1 W85-315 360, 7500 SNAP RING
367 1 W58-48 360, 7500 BALL BEARING 487 1 W58-48 360, 7500 BALL BEARING
367 1 W62-26-10 360, 7500 DOUBLE LIP SEAL 487 1 W62-26-10 360, 7500 DOUBLE LIP SEAL

For tell-tale applications a “D” must follow the P360___.

Shaft end cover must be noted to have machining done for tell-tale drain.
Extra small parts needed for tell-tale unit.

QTY PART NUMBER D E S C R I P T I O N

1 961-01539 360 SEAL RETAINER “TELL-TALE”
1 W62-26-10 SEAL FOR “TELL-TALE”
1 W85-315 7500/360 SNAP RING
1 W0-19 PIPE PLUG/SOC HD 1/8-27 NPT
1 K-2995-159 RETAINER O’RING
PERMCO MODEL: 360 Port End Covers
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
AB 1 592-01383-2336 1-1/2 SIDE IN X BLK (JIC)CW EM 1 592-01383-2481 1-1/2 X 1-1/4 SIDE (BSPP)CW
AE 1 592-01383-2381 1-1/4 X 1-1/2 SIDE (JIC)CCW EN 1 592-01383-2236 BLK X 1-1/2 SIDE IN (SF)CCW
AF 1 592-01383-2331 1-1/4 SIDE IN X BLK (JIC)CW EO 1 592-01383-2478 1-1/2 X 1 SIDE (BSPP)CW
AH 1 592-01390 BLANK MULTIPLE CW EQ 1 592-01383-2432 1-1/4 X 1-1/4 SIDE (BSPP)CW
AI 1 592-01383-2326 1 SIDE IN X BLK (JIC)CW ER 1 592-01383-2477 1-1/4 X 1 SIDE (BSPP)CW

AK 1 592-01383-2380 BLK X 1-1/4 SIDE OUT(JIC)CW ES 1 592-01383-2427 1 X 1 SIDE (BSPP)CW

AM 1 592-01383-2376 BLK X 1 SIDE OUT (JIC)CW FA 1 592-01383-2331 BLK X 1-1/4 SIDE IN (JIC)CCW
AO 1 592-01383-2436 1-1/2 SIDE IN X BLK (BSPP)CW FD 1 592-01383-2279 1 X 2 SIDE (SF)CCW
AP 1 592-01383-2431 1-1/4 SIDE IN X BLK (BSPP)CW FE 1 592-01383-2332 1-1/4 X 1-1/4 SIDE (JIC)CCW
AQ 1 592-01383-2426 1 SIDE IN X BLK (BSPP)CW FN 1 592-01383-2231 BLK X 1-1/4 SIDE IN (SF)CCW

AS 1 592-01383-2480 BLK X 1-1/4 SIDE OUT (BSPP)CW GD 1 592-01383-2237 1-1/2 X 1-1/2 SIDE (SF)CCW
AT 1 592-01383-2476 BLK X 1 SIDE OUT (BSPP)CW HA 1 592-01390 BLANK MULTIPLE CCW
BA 1 592-01383-2336 BLK X 1-1/2 SIDE IN(JIC)CCW IA 1 592-01383-2326 BLK X 1 SIDE IN (JIC)CCW
BD 1 592-01383-2285 1-1/2 X 2 SIDE (SF)CCW ID 1 592-01383-2281 1-1/4 X 1-1/2 SIDE (SF)CCW
BE 1 592-01383-2378 1 X 1-1/2 SIDE (JIC)CCW IE 1 592-01383-2377 1 X 1-1/4 SIDE (JIC)CCW

DB 1 592-01383-2285 2 X 1-1/2 SIDE(SF)CW IN 1 592-01383-2226 BLK X 1 SIDE IN (SF)CCW

DE 1 592-01383-2282 2 X 1-1/4 SIDE (SF)CW JD 1 592-01383-2278 1 X 1-1/2 SIDE (SF)CCW
DF 1 592-01383-2279 2 X 1 SIDE (SF)CW KA 1 592-01383-2380 1-1/4 SIDE OUT X BLK (JIC)CCW
DG 1 592-01383-2237 1-1/2 X 1-1/2 SIDE (SF)CW KD 1 592-01383-2232 1-1/4 X 1-1/4 SIDE (SF)CCW
DI 1 592-01383-2281 1-1/2 X 1-1/4 SIDE (SF)CW KE 1 592-01383-2327 1 X 1 SIDE (JIC)CCW

DJ 1 592-01383-2278 1-1/2 X 1 SIDE (SF)CW KN 1 592-01383-2284 1-1/2 SIDE OUT X BLK (SF)CCW
DK 1 592-01383-2232 1-1/4 X 1-1/4 SIDE (SF)CW LD 1 592-01383-2277 1 X 1-1/4 SIDE (SF)CCW
DL 1 592-01383-2277 1-1/4 X 1 SIDE (SF)CW LN 1 592-01383-2280 1-1/4 SIDE OUT X BLK (SF)CCW
DM 1 592-01383-2227 1 X 1 SIDE (SF)CW MA 1 592-01383-2376 1 SIDE OUT X BLK (JIC)CCW
DN 1 592-01383-2240 BLK X 2 SIDE IN (SF)CCW MD 1 592-01383-2227 1 X 1 SIDE (SF)CCW

DQ 1 592-01383-2585 2 X 1-1/2 SIDE (MET.SF)CW ME 1 592-01383-2481 1-1/4 X 1-1/2 SIDE (BSPP)CCW

DR 1 592-01383-2582 2 X 1-1/4 SIDE (MET.SF)CW MN 1 592-01383-2276 1 SIDE OUT X BLK (SF)CCW
DS 1 592-01383-2579 2 X 1 SIDE (MET.SF)CW ND 1 592-01383-2240 2 SIDE IN X BLK (SF)CW
DT 1 592-01383-2537 1-1/2 X 1-1/2 SIDE (MET.SF)CW NE 1 592-01383-2236 1-1/2 SIDE IN X BLK (SF)CW
DU 1 592-01383-2581 1-1/2 X 1-1/4 SIDE (MET.SF)CW NF 1 592-01383-2231 1-1/4 SIDE IN X BLK (SF)CW

DV 1 592-01383-2578 1-1/2 X 1 SIDE (MET.SF)CW NI 1 592-01383-2226 1 SIDE IN X BLK (SF)CW

DW 1 592-01383-2532 1-1/4 X 1-1/4 SIDE (MET.SF)CW NK 1 592-01383-2284 BLK X 1-1/2 SIDE OUT (SF)CW
DX 1 592-01383-2577 1-1/4 X 1 SIDE (MET.SF)CW NL 1 592-01383-2280 BLK X 1-1/4 SIDE OUT (SF)CW
DY 1 592-01383-2527 1 X 1 SIDE (MET.SF)CW NM 1 592-01383-2276 BLK X 1 SIDE OUT (SF)CW
EA 1 592-01383-2381 1-1/2 X 1-1/4 SIDE (JIC)CW NO 1 592-01383-2540 2 SIDE IN X BLK (MET.SF)CW

EB 1 592-01383-2378 1-1/2 X 1 SIDE (JIC)CW NQ 1 592-01383-2536 1-1/2 SIDE IN X BLK (MET.SF)CW

ED 1 592-01383-2282 1-1/4 X 2 SIDE (SF)CCW NR 1 592-01383-2531 1-1/4 SIDE IN X BLK (MET.SF)CW
EF 1 592-01383-2332 1-1/4 X 1-1/4 SIDE (JIC)CW NS 1 592-01383-2526 1 SIDE IN X BLK (MET.SF)CW
EI 1 592-01383-2377 1-1/4 X 1 SIDE (JIC)CW NU 1 592-01383-2584 BLK X 1-1/2 SIDE OUT (MET.SF)CW
EK 1 592-01383-2327 1 X 1 SIDE (JIC)CW NV 1 592-01383-2580 BLK X 1-1/4 SIDE OUT (MET.SF)CW
PERMCO MODEL: 360 Port End Covers
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
NW 1 592-01383-2576 BLK X 1 SIDE OUT (MET.SF)CW
OA 1 592-01383-2436 BLK X 1-1/2 SIDE IN(BSPP)CCW
OE 1 592-01383-2478 1 X 1-1/2 SIDE(BSPP)CCW
ON 1 592-01383-2540 BLK X 2 SIDE IN (MET.SF)CCW
PA 1 592-01383-2431 BLK X 1-1/4 SIDE IN (BSPP)CCW

QA 1 592-01383-2426 BLK X 1 SIDE IN (BSPP)CCW

QD 1 592-01383-2585 1-1/2 X 2 SIDE (MET.SF)CCW
QE 1 592-01383-2432 1-1/4 X 1-1/4 SIDE (BSPP)CCW
QN 1 592-01383-2536 BLK X 1-1/2 SIDE IN (MET.SF)CCW
RD 1 592-01383-2582 1-1/4 X 2 SIDE (MET.SF)CCW

RE 1 592-01383-2477 1 X 1-1/4 SIDE (BSPP)CCW

RN 1 592-01383-2531 BLK X 1-1/4 SIDE IN (MET.SF)CCW
SA 1 592-01383-2480 1-1/4 SIDE OUT X BLK (BSPP)CCW
SD 1 592-01383-2579 1 X 2 SIDE (MET.SF)CCW
SE 1 592-01383-2427 1 X 1 SIDE (BSPP)CCW

SN 1 592-01383-2526 BLK X 1 SIDE IN (MET.SF)CCW

TA 1 592-01383-2476 1 SIDE OUT X BLK (BSPP)CCW
TD 1 592-01383-2537 1-1/2 X 1-1/2 SIDE (MET.SF)CCW
UD 1 592-01383-2581 1-1/4 X 1-1/2 SIDE (MET.SF)CCW
UN 1 592-01383-2584 1-1/2 SIDE OUT X BLK (MET.SF)CCW

VD 1 592-01383-2578 1 X 1-1/2 SIDE (MET.SF)CCW

VN 1 592-01383-2580 1-1/4 SIDE OUT X BLK (MET.SF)CCW
WD 1 592-01383-2532 1-1/4 X 1-1/4 SIDE (MET.SF)CCW
WN 1 592-01383-2576 1 SIDE OUT X BLK (MET.SF)CCW
XD 1 592-01383-2577 1 X 1-1/4 SIDE (MET.SF)CCW

YD 1 592-01383-2527 1 X 1 SIDE (MET.SF)CCW

PERMCO MODEL: 360 PORT END COVER SMALL PARTS
CODE QTY PART NUMBER D E S C R I P T I O N
2 921-01380 360 BUSHING
1 Z-1967-45-2 PERMCO NAME TAG
PERMCO MODEL: 360 Housings
CODE QTY PART NUMBER D E S C R I P T I O N
ZA05 1 577-01381-05 360 GEAR HOUSING FOR 1/2 GEAR
ZA07 1 577-01381-07 360 GEAR HOUSING FOR 3/4 GEAR
ZA10 1 577-01381-10 360 GEAR HOUSING FOR 1 GEAR
ZA12 1 577-01381-12 360 GEAR HOUSING FOR 1-1/4 GEAR
ZA15 1 577-01381-15 360 GEAR HOUSING FOR 1-1/2 GEAR

ZA17 1 577-01381-17 360 GEAR HOUSING FOR 1-3/4 GEAR

ZA20 1 577-01381-20 360 GEAR HOUSING FOR 2 GEAR
ZA22 1 577-01381-22 360 GEAR HOUSING FOR 2-1/4 GEAR
ZA25 1 577-01381-25 360 GEAR HOUSING FOR 2-1/2 GEAR
PERMCO MODEL: 360 HOUSING SMALL PARTS
CODE QTY PART NUMBER D E S C R I P T I O N
8 280-1971-062 360 SERIES HOLLOW DOWEL PIN
2 947-01377 360 UNI-ROTATIONAL TP
2 947-01378 360 PUMP SEAL RING
2 947-01379 360 PUMP BACK-UP RING
2 TA-2995-250 360 SERIES SQUARE GASKET
PERMCO MODEL: 360 DRIVE SHAFTS OR GEAR/SHAFTS
CODE QTY PART NUMBER D E S C R I P T I O N
00 1 024-01411-05 360 G/SH MULTI 1/2 SAE C-KEYED
00 1 024-01411-07 360 G/SH MULTI 3/4 SAE C-KEYED
00 1 024-01411-10 360 G/SH MULTI 1 SAE C-KEYED
00 1 024-01411-12 360 G/SH MULTI 1-1/4 SAE C-KEYED
00 1 024-01411-15 360 G/SH MULTI 1-1/2 SAE C-KEYED

00 1 024-01411-17 360 G/SH MULTI 1-3/4 SAE C-KEYED

00 1 024-01411-20 360 G/SH MULTI 2 SAE C-KEYED
00 1 024-01411-22 360 G/SH MULTI 2-1/4 C-KEYED
00 1 024-01411-25 360 G/SH MULTI 2-1/2 C-KEYED

6 1 024-01394-05 360 G/SH MULTI 1/2 SAE C-SPLN

6 1 024-01394-07 360 G/SH MULTI 3/4 SAE C-SPLN
6 1 024-01394-10 360 G/SH MULTI 1 SAE C-SPLN
6 1 024-01394-12 360 G/SH MULTI 1-1/4 SAE C-SPLN
6 1 024-01394-15 360 G/SH MULTI 1-1/2 SAE C-SPLN

6 1 024-01394-17 360 G/SH MULTI 1-3/4 SAE C-SPLN

6 1 024-01394-20 360 G/SH MULTI 2 SAE C-SPLN
6 1 024-01394-22 360 G/SH MULTI 2-1/4 SAE C-SPLN
6 1 024-01394-25 360 G/SH MULTI 2-1/2 SAE C-SPLN
87 1 024-01466-15 360 G/SH MULTI 1-1/2 SAE BB-SPLN

87 1 024-01466-20 360 G/SH MULTI 2 SAE BB-SPLN

87 1 024-01466-25 360 G/SH MULTI 2-1/2 BB-SPLN

C00 1 023-01619 360 CONT. SH, 1-1/4 DIA. C KEYED

C 6 1 023-01617 360 CONT. SH, 1-1/4 DIA.14 T C SPLN
C87 1 023-01618 360 CONT. SH, 1 DIA. 15 T BB SPLN
C99 1 023-01614 360 CONT. SH, 1-1/2 DIA.17 T CC SPLN
PERMCO MODEL: 360 DRIVE SHAFT SMALL PARTS
CODE QTY PART NUMBER D E S C R I P T I O N
00 1 SP-1000-5 SHAFT PROTECTOR/ 1-1/4 DIA
00 1 009-01412 5/16 X 5/16 X 1-1/2 KEY

6 1 SP-1000-4 SHAFT PROTECTOR/ 1-1/4 DIA

87 1 SP-1000-3 SHAFT PROTECTOR/ 1 DIA

C00 1 W86-137 7500, 360 SNAP RING

C00 1 009-01412 5/16 X 5/16 X 1-1/2 KEY
C00 1 SP-1000-5 SHAFT PROTECTOR/ 1-1/4 DIA
C00 1 558-01615 360 CONTI SHAFT BRG SPACER

C 6 1 W86-137 7500, 360 SNAP RING

C 6 1 SP-1000-4 SHAFT PROTECTOR/ 1-1/4 DIA
C 6 1 558-01615 360 CONTI SHAFT BRG SPACER

C87 1 W86-137 7500, 360 SNAP RING

C87 1 SP-1000-3 SHAFT PROTECTOR/ 1 DIA
C87 1 558-01615 360 CONTI SHAFT BRG SPACER

C99 1 W86-137 7500, 360 SNAP RING

C99 * 1 SP-1000-xxx SHAFT PROTECTOR/ 1-1/2 DIA
C99 1 558-01615 360 CONTI SHAFT BRG SPACER
PERMCO MODEL: 360 Gear and Shaft Combinations
CODE QTY PART NUMBER D E S C R I P T I O N
05 1 996-01375-05 360 1/2 GEAR SET
07 1 996-01375-07 360 3/4 GEAR SET
10 1 996-01375-10 360 1 GEAR SET
12 1 996-01375-12 360 1-1/4 GEAR SET
15 1 996-01375-15 360 1-1/2 GEAR SET

17 1 996-01375-17 360 1-3/4 GEAR SET

20 1 996-01375-20 360 2 GEAR SET
22 1 996-01375-22 360 2-1/4 GEAR SET
25 1 996-01375-25 360 2-1/2 GEAR SET
PERMCO MODEL: 360 Bearing Carriers (Single In, Dual Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
AC 1 576-01391-2537 2-1/2-T X 1-1/2 & 1-1/2(M-SF) CCW FM 1 576-01391-3377 2-T X 1-1/4 & 1 (JIC) CW
BC 1 576-01391-2581 1-1/2-T X 1-1/2 & 1-1/4 (M-SF) CCW FO 1 576-01391-3327 2-T X 1 & 1 (JIC) CW
BZ 1 576-01391-2237 2-1/2-T X 1-1/2 & 1-1/2 (SF) CCW FP 1 576-01391-4337 1-1/2-T X 1-1/2 & 1-1/2 (JIC) CW
CA 1 576-01391-2537 2-1/2-T X 1-1/2 & 1-1/2 (M-SF) CW FQ 1 576-01391-4381 1-1/2-T X 1-1/2 & 1-1/4 (JIC) CW
CB 1 576-01391-2581 2-1/2-T X 1-1/2 & 1-1/4 (M-SF) CW FR 1 576-01391-4378 1-1/2-T X 1-1/2 & 1 (JIC) CW

CD 1 576-01391-2578 2-1/2-T X 1-1/2 & 1 (M-SF) CW FS 1 576-01391-4332 1-1/2-T X 1-1/4 & 1-1/4 (JIC) CW
CE 1 576-01391-2532 2-1/2-T X 1-1/4 1-1/4 (M-SF) CW FT 1 576-01391-4377 1-1/2-T X 1-1/4 & 1 (JIC) CW
CF 1 576-01391-2577 2-1/2-T X 1-1/4 & 1 (M-SF) CW FU 1 576-01391-4327 1-1/2-T X 1 & 1 (JIC) CW
CG 1 576-01391-2527 2-1/2-T X 1 & 1 (M-SF) CW FV 1 576-01391-5332 1-1/4-T X 1-1/4 & 1-1/4 (JIC) CW
CI 1 576-01391-3537 2-T X 1-1/2 & 1-1/2 (M-SF) CW FW 1 576-01391-5377 1-1/4-T X 1-1/4 & 1 (JIC) CW

CJ 1 576-01391-3581 2-T X 1-1/2 & 1-1/4 (M-SF) CW FX 1 576-01391-5327 1-1/4-T X 1 & 1 (JIC) CW
CK 1 576-01391-3578 2-T X 1-1/2 & 1 (M-SF) CW FY 1 576-01391-6327 1-T X 1 & 1 (JIC) CW
CL 1 576-01391-3532 2-T X 1-1/4 & 1-1/4 (M-SF) CW FZ 1 576-01391-2277 2-1/2-T X 1-1/4 & 1 (SF) CCW
CM 1 576-01391-3577 2-T X 1-1/4 & 1(M-SF) CW GC 1 576-01391-2527 2-1/2-T X 1 & 1 (M-SF) CCW
CO 1 576-01391-3527 2-T X 1 & 1 (M-SF) CW GI 1 576-01391-3437 2-T X 1-1/2 & 1-1/2 (BSPP) CCW

CP 1 576-01391-4537 1-1/2-T X 1-1/2 & 1-1/2 (M-SF) CW GZ 1 576-01391-2227 2-1/2-T X 1 & 1 (SF) CCW
CQ 1 576-01391-4581 1-1/2-T X 1-1/2 & 1-1/4 (M-SF) CW IC 1 576-01391-3537 2-T X 1-1/2 & 1-1/2 (M-SF) CCW
CR 1 576-01391-4578 1-1/2-T X 1-1/2 & 1 (M-SF) CW IF 1 576-01391-3337 2-T X 1-1/2 & 1-1/2 (JIC) CCW
CS 1 576-01391-4532 1-1/2-T X 1-1/4 & 1-1/4 (M-SF) CW IG 1 576-01391-3437 2-T X 1-1/2 & 1-1/2 (BSPP) CW
CT 1 576-01391-4577 1-1/2-T X 1-1/4 & 1 (M-SF) CW IJ 1 576-01391-3481 2-T X 1-1/2 & 1-1/4 (BSPP) CW

CU 1 576-01391-4527 1-1/2-T X 1 & 1 (M-SF) CW IK 1 576-01391-3478 2-T X 1-1/2 & 1 (BSPP) CW

CV 1 576-01391-5532 1-1/4-T X 1-1/4 & 1-1/4 (M-SF) CW IL 1 576-01391-3432 2-T X 1-1/4 & 1-1/4 (BSPP) CW
CW 1 576-01391-5577 1-1/4-T X 1-1/4 & 1 (M-SF) CW IM 1 576-01391-3477 2-T X 1-1/4 & 1 (BSPP) CW
CX 1 576-01391-5527 1-1/4-T X 1 & 1 (M-SF) CW IO 1 576-01391-3427 2-T X 1 & 1 (BSPP) CW
CY 1 576-01391-6527 1-T X 1 & 1 (M-SF) CW IP 1 576-01391-4437 1-1/2-T X 1-1/2 & 1-1/2 (BSPP) CW

CZ 1 576-01391-2281 2-1/2-T X 1-1/2 & 1-1/4 (SF) CCW IQ 1 576-01391-4481 1-1/2-T X 1-1/2 & 1-1/4 (BSPP) CW
DC 1 576-01391-2578 2-1/2-T X 1-1/2 & 1 (M-SF) CCW IR 1 576-01391-4478 1-1/2-T X 1-1/2 & 1 (BSPP) CW
DZ 1 576-01391-2278 2-1/2-T X 1-1/2 & 1 (SF) CCW IS 1 576-01391-4432 1-1/2-T X 1-1/4 & 1-1/4 (BSPP) CW
EC 1 576-01391-2532 2-1/2-T X 1-1/4 & 1-1/4 (M-SF) CCW IT 1 576-01391-4477 1-1/2-T X 1-1/4 & 1 (BSPP) CW
EZ 1 576-01391-2232 2-1/2-T X 1-1/4 & 1-1/4 (SF) CCW IU 1 576-01391-4427 1-1/2-T X 1 & 1 (BSPP) CW

FC 1 576-01391-2577 2-1/2-T X 1-1/4 & 1 (M-SF) CCW IV 1 576-01391-5432 1-1/4-T X 1-1/4 & 1-1/4 (BSPP) CW
FI 1 576-01391-3337 2-T X 1-1/2 & 1-1/2 (JIC) CW IW 1 576-01391-5477 1-1/4-T X 1-1/4 & 1 (BSPP) CW
FJ 1 576-01391-3381 2-T X 1-1/2 & 1-1/4 (JIC) CW IX 1 576-01391-5427 1-1/4-T X 1 & 1 (BSPP) CW
FK 1 576-01391-3378 2-T X 1-1/2 & 1 (JIC) CW IY 1 576-01391-6427 1-T X 1 & 1 (BSPP) CW
FL 1 576-01391-3332 2-T X 1-1/4 & 1-1/4 (JIC) CW IZ 1 576-01391-3237 2-T X 1-1/2 & 1-1/2 (SF) CCW

In the belly down position, determine pump rotation from shaft end. Clockwise rotation will put the inlet on the left side and the top
outlet port will be for the front gear section. Counter-clockwise rotation will put the inlet on the right side and the top outlet will
be for the rear gear section.
NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 Bearing Carriers (Single In, Dual Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
JC 1 576-01391-3581 2-T X 1-1/2 & 1-1/4 (M-SF) CCW SZ 1 576-01391-4232 1-1/2-T X 1-1/4 & 1-1/4 (SF) CCW
JF 1 576-01391-3381 2-T X 1-1/2 & 1-1/4 (JIC) CCW TC 1 576-01391-4577 1-1/2-T X 1-1/4 & 1 (M-SF) CCW
JI 1 576-01391-3481 2-T X 1-1/2 & 1-14 (BSPP) CCW TF 1 576-01391-4377 1-1/2-T X 1-1/4 & 1 JIC (JIC) CCW
JZ 1 576-01391-3281 2-T X 1-1/2 & 1-1/4 (SF) CCW TI 1 576-01391-4477 1-1/2-T X 1-1/4 & 1 (BSPP) CCW
KC 1 576-01391-3578 2-T X 1-1/2 & 1 (M-SF) CCW TZ 1 576-01391-4277 1-1/2-T X 1-1/4 & 1 (SF) CCW

KF 1 576-01391-3378 2-T X 1-1/2 & 1 (JIC) CCW UC 1 576-01391-4527 1-1/2-T X 1 & 1 (M-SF) CCW
KI 1 576-01391-3478 2-T X 1-1/2 & 1 (BSPP) CCW UF 1 576-01391-4327 1-1/2-T X 1 & 1 (JIC) CCW
KZ 1 576-01391-3278 2-T X 1-1/2 & 1 (SF) CCW UI 1 576-01391-4427 1-1/2-T X 1 & 1(BSPP) CCW
LC 1 576-01391-3532 2-T X 1-1/4 & 1-1/4 (M-SF) CCW UZ 1 576-01391-4227 1-1/2-T X 1 & 1 (SF) CCW
LF 1 576-01391-3332 2-T X 1-1/4 & 1-1/4 (JIC) CCW VC 1 576-01391-5532 1-1/4-T X 1-1/4 & 1-1/4 (M-SF) CCW

LI 1 576-01391-3432 2-T X 1-1/4 & 1-1/4 (BSPP) CCW VF 1 576-01391-5332 1-1/4-T X 1-1/4 X 1-1/4 (JIC) CCW
LZ 1 576-01391-3232 2-T X 1-1/4 & 1-1/4 (SF) CCW VI 1 576-01391-5432 1-1/4-T X 1-1/4 & 1-1/4(BSPP) CCW
MC 1 576-01391-3577 2-T X 1-1/4 & 1 (M-SF) CCW VZ 1 576-01391-5232 1-1/4-T X 1-1/4 & 1-1/4(SF) CCW
MF 1 576-01391-3377 2-T X 1-1/4 & 1 (JIC) CCW WC 1 576-01391-5577 1-1/4-T X 1-1/4 & 1 (M-SF) CCW
MI 1 576-01391-3477 2-T X 1-1/4 & 1 (BSPP) CCW WF 1 576-01391-5377 1-1/4-T X 1-1/4 & 1 (JIC) CCW

MZ 1 576-01391-3277 2-T X 1-1/4 & 1 (SF) CCW WI 1 576-01391-5477 1-1/4-T X 1-1/4 & 1 (BSPP) CCW
OC 1 576-01391-3527 2-T X 1 & 1 (M-SF) CCW WZ 1 576-01391-5277 1-1/4-T X 1-1/4 & 1 (SF) CCW
OF 1 576-01391-3327 2-T X 1 & 1 (JIC) CCW XC 1 576-01391-5527 1-1/4-T X 1 & 1 (M-SF) CCW
OI 1 576-01391-3427 2-T X 1 & 1 (BSPP) CCW XF 1 576-01391-5327 1-1/4-T X 1 & 1 (JIC) CCW
OZ 1 576-01391-3227 2-T X 1 & 1 (SF) CCW XI 1 576-01391-5427 1-1/4-T X 1 & 1 (BSPP) CCW

PC 1 576-01391-4537 1-1/2-T X 1-1/2 & 1-1/2 (M-SF) CCW XZ 1 576-01391-5227 1-1/4-T X 1 & 1 (SF) CCW
PF 1 576-01391-4337 1-1/2-T X 1-1/2 & 1-1/2 (JIC) CCW YC 1 576-01391-6527 1-T X 1 & 1(M-SF) CCW
PI 1 576-01391-4437 1-1/2-T X 1-1/2 & 1-1/2 (BSPP) CCW YF 1 576-01391-6327 1-T X 1 & 1 (JIC) CCW
PZ 1 576-01391-4237 1-1/2-T X 1-1/2 & 1-1/2 (SF) CCW YI 1 576-01391-6427 1-T X 1 & 1 (BSPP) CCW
QC 1 576-01391-4581 1-1/2-T X 1-1/2 & 1-1/4(M-SF) CCW YZ 1 576-01391-6227 1-T X 1 & 1 (SF) CCW

QF 1 576-01391-4381 1-1/2-T X 1-1/2 & 1-1/4 (JIC) CCW ZB 1 576-01391-2237 2-1/2-T X 1-1/2 & 1-1/2 (SF) CW
QI 1 576-01391-4481 1-1/2-T X 1-1/2 & 1-1/4 (BSPP) CCW ZC 1 576-01391-2281 2-1/2-T X 1-1/2 & 1-1/4 (SF) CW
QZ 1 576-01391-4281 1-1/2-T X 1-1/2 & 1-1/4 (SF) CCW ZD 1 576-01391-2278 2-1/2-T X 1-1/2 & 1 (SF) CW
RC 1 576-01391-4578 1-1/2-T X 1-1/2 & 1 (M-SF) CCW ZE 1 576-01391-2232 2-1/2-T X 1-1/4 & 1-1/4 (SF) CW
RF 1 576-01391-4378 1-1/2-T X 1-1/2 & 1 (JIC) CCW ZF 1 576-01391-2277 2-1/2-T X 1-1/4 & 1 (SF) CW

RI 1 576-01391-4478 1-1/2-T X 1-1/2 & 1 (BSPP) CCW ZG 1 576-01391-2227 2-1/2-T X 1 & 1 (SF) CW
RZ 1 576-01391-4278 1-1/2-T X 1-1/2 & 1 (SF) CCW ZI 1 576-01391-3237 2-T X 1-1/2 & 1-1/2 (SF) CW
SC 1 576-01391-4532 1-1/2-T X 1-1/4 & 1-1/4 (M-SF) CCW ZJ 1 576-01391-3281 2-T X 1-1/2 & 1-1/4 (SF) CW
SF 1 576-01391-4332 1-1/2-T X 1-1/4 & 1-1/4 (JIC) CCW ZK 1 576-01391-3278 2-T X 1-1/2 & 1(SF) CW
SI 1 576-01391-4432 1-1/2-T X 1-1/4 & 1-1/4(BSPP) CCW ZL 1 576-01391-3232 2-T X 1-1/4 & 1-1/4 (SF) CW

In the belly down position, determine pump rotation from shaft end. Clockwise rotation will put the inlet on the left side and the top
outlet port will be for the front gear section. Counter-clockwise rotation will put the inlet on the right side and the top outlet will
be for the rear gear section.
NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 Bearing Carriers (Single In, Dual Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
ZM 1 576-01391-3277 2-T X 1-1/4 & 1 (SF) CW
ZO 1 576-01391-3227 2-T X 1 & 1 (SF) CW
ZP 1 576-01391-4237 1-1/2-T X 1-1/2 & 1-1/2 (SF) CW
ZQ 1 576-01391-4281 1-1/2-T X 1-1/2 & 1-1/4 (SF) CW
ZR 1 576-01391-4278 1-1/2-T X 1-1/2 & 1 (SF) CW

ZS 1 576-01391-4232 1-1/2-T X 1-1/4 & 1-1/4 (SF) CW

ZT 1 576-01391-4277 1-1/2-T X 1-1/4 & 1 (SF) CW
ZU 1 576-01391-4227 1-1/2-T X 1 & 1 (SF) CW
ZV 1 576-01391-5232 1-1/4-T X 1-1/4 & 1-1/4 (SF) CW
ZW 1 576-01391-5277 1-1/4-T X 1-1/4 & 1 (SF) CW

ZX 1 576-01391-5227 1-1/4-T X 1 & 1 (SF) CW

ZY 1 576-01391-6227 1-T X 1 & 1 (SF) CW

In the belly down position, determine pump rotation from shaft end. Clockwise rotation will put the inlet on the left side and the top
outlet port will be for the front gear section. Counter-clockwise rotation will put the inlet on the right side and the top outlet will
be for the rear gear section.
NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 Bearing Carriers (Single In, Single Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
AG 1 576-01392-1285 1-1/2 X 2-T (SF) CCW GX 1 576-01392-1577 1-1/4-T X 1 (MET.SF) CW
AJ 1 576-01392-1385 1-1/2 X 2-T (JIC) CCW GY 1 576-01392-1527 1-T X 1 (MET.SF) CW
B 1 576-01392-1321 7/8"JIC-THRU X BLANK CW IB 1 576-01392-1286 1-1/2 X 2-1/2-T (SF) CCW
BG 1 576-01392-1282 1-1/4 X 2-T (SF) CCW JA 1 576-01392-1385 2-T X 1-1/2 (JIC) CW
BI 1 576-01392-1286 2-1/2-T X 1-1/2 (SF) CW JB 1 576-01392-1382 2-T X 1-1/4 (JIC) CW

BJ 1 576-01392-1382 1-1/4 X 2-T (JIC) CCW JE 1 576-01392-1379 2-T X 1 (JIC) CW

BK 1 576-01392-1283 2-1/2-T X 1-1/4 (SF) CW JK 1 576-01392-1337 1-1/2-T X 1-1/2 (JIC) CW
BL 1 576-01392-1296 2-1/2-T X 1 (SF) CW JL 1 576-01392-1381 1-1/2-T X 1-1/4 (JIC) CW
BM 1 576-01392-1586 2-1/2-T X 1-1/2 (MET.SF) CW JM 1 576-01392-1378 1-1/2-T X 1 (JIC) CW
BO 1 576-01392-1583 2-1/2-T X 1-1/4 (MET.SF) CW JN 1 576-01392-1332 1-1/4-T X 1-1/4 (JIC) CW

BP 1 576-01392-1596 2-1/2-T X 1 (MET.SF) CW JO 1 576-01392-1377 1-1/4-T X 1(JIC) CW

C 1 576-01392-1321 BLANK X 7/8"JIC-THRU CCW JP 1 576-01392-1327 1-T X 1 (JIC) CW
EG 1 576-01392-1279 1 X 2-T (SF) CCW KB 1 576-01392-1283 1-1/4 X 2-1/2-T (SF) CCW
EJ 1 576-01392-1379 1 X 2-T (JIC) CCW KG 1 576-01392-1237 1-1/2 X 1-1/2-T (SF) CCW
GA 1 576-01392-1285 2-T X 1-1/2 (SF) CW KJ 1 576-01392-1337 1-1/2 X 1-1/2-T (JIC) CCW

GB 1 576-01392-1282 2-T X 1-1/4 (SF) CW LB 1 576-01392-1296 1 X 2-1/2-T (SF) CCW

GE 1 576-01392-1279 2-T X 1 (SF) CW LG 1 576-01392-1281 1-1/4 X 1-1/2-T (SF) CCW
GK 1 576-01392-1237 1-1/2-T X 1-1/2 (SF) CW LJ 1 576-01392-1381 1-1/4 X 1-1/2-T (JIC) CCW
GL 1 576-01392-1281 1-1/2-T X 1-1/4 (SF) CW MB 1 576-01392-1586 1-1/2 X 2-1/2-T (MET.SF) CCW
GM 1 576-01392-1276 1-1/2-T X 1 (SF) CW MG 1 576-01392-1276 1 X 1-1/2-T (SF) CCW

GN 1 576-01392-1232 1-1/4-T X 1-1/4 (SF) CW MJ 1 576-01392-1378 1 X 1-1/2-T (JIC) CCW

GO 1 576-01392-1277 1-1/4-T X 1 (SF) CW NG 1 576-01392-1232 1-1/4 X 1-1/4-T (SF) CCW
GP 1 576-01392-1227 1-T X 1 (SF) CW NJ 1 576-01392-1332 1-1/4 X 1-1/4-T (JIC) CCW
GQ 1 576-01392-1585 2-T X 1-1/2 (MET.SF) CW OB 1 576-01392-1583 1-1/4 X 2-1/2-T (MET.SF) CCW
GR 1 576-01392-1582 2-T X 1-1/4 (MET.SF) CW OG 1 576-01392-1277 1 X 1-1/4-T (SF) CCW

GS 1 576-01392-1579 2-T X 1 (MET.SF) CW OJ 1 576-01392-1377 1 X 1-1/4-T (JIC) CCW

GT 1 576-01392-1537 1-1/2-T X 1-1/2 (MET.SF) CW PB 1 576-01392-1596 1 X 1-1/2-T (MET.SF) CCW
GU 1 576-01392-1581 1-1/2-T X 1-1/4 (MET.SF) CW PG 1 576-01392-1227 1 X 1-T (SF) CCW
GV 1 576-01392-1578 1-1/2-T X 1 (MET.SF) CW PJ 1 576-01392-1327 1 X 1-T (JIC) CCW
GW 1 576-01392-1532 1-1/4-T X 1-1/4 (MET.SF) CW QG 1 576-01392-1585 1-1/2 X 2-T (MET.SF) CCW

NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 Bearing Carriers (Single In, Single Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
RG 1 576-01392-1582 1-1/4 X 2-T (MET.SF) CCW
SG 1 576-01392-1579 1 X 2-T (MET.SF) CCW
TG 1 576-01392-1537 1-1/2 X 1-1/2-T (MET.SF) CCW
UG 1 576-01392-1581 1-1/4 X 1-1/2-T (MET.SF) CCW
VG 1 576-01392-1578 1 X 1-1/2-T (MET.SF) CCW

WG 1 576-01392-1532 1-1/4 X 1-1/4-T (MET.SF) CCW

XG 1 576-01392-1577 1 X 1-1/4 (MET.SF) CCW
YG 1 576-01392-1527 1 X 1-T (MET.SF) CCW

NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 Bearing Carriers (Common In, Common Out)
CODE QTY PART NUMBER D E S C R I P T I O N CODE QTY PART NUMBER D E S C R I P T I O N
DO 1 576-01392-7385 1-1/2-T X 2-T (JIC) CCW
LO 1 576-01392-7382 1-1/4-T X 2-T (JIC) CCW
MO 1 576-01392-7337 1-1/2-T X 1-1/2-T (JIC) CCW
PO 1 576-01392-7381 1-1/4-T X 1-1/2-T (JIC) CCW
QO 1 576-01392-7332 1-1/4-T X 1-1/4-T (JIC) CCW

OD 1 576-01392-7385 2-T X 1-1/2-T (JIC) CW

OL 1 576-01392-7382 2-T X 1-1/4-T (JIC) CW
OM 1 576-01392-7337 1-1/2-T X 1-1/2-T (JIC) CW
OP 1 576-01392-7381 1-1/2-T X 1-1/4-T (JIC) CW
OQ 1 576-01392-7332 1-1/4-T X 1-1/4-T (JIC) CW

BT 1 576-01392-7266 1-1/2-T X 2-1/2-T (SF) CCW

ET 1 576-01392-7283 1-1/4-T X 2-1/2-T (SF) CCW
MT 1 576-01392-7285 1-1/2-T X 2-T (SF) CCW
NT 1 576-01392-7282 1-1/4-T X 2-T (SF) CCW
OT 1 576-01392-7237 1-1/2-T X 1-1/2-T (SF) CCW

PT 1 576-01392-7281 1-1/4-T X 1-1/2-T (SF) CCW

QT 1 576-01392-7232 1-1/4-T X 1-1/4-T (SF) CCW
TB 1 576-01392-7266 2-1/2-T X 1-1/2-T (SF) CW
TE 1 576-01392-7283 2-1/2-T X 1-1/4-T (SF) CW
TM 1 576-01392-7285 2-T X 1-1/2-T (SF) CW

TN 1 576-01392-7282 2-T X 1-1/4-T (SF) CW

TO 1 576-01392-7237 1-1/2-T X 1-1/2-T (SF) CW
TP 1 576-01392-7281 1-1/2-T X 1-1/4-T (SF) CW
TQ 1 576-01392-7232 1-1/4-T X 1-1/4-T (SF) CW

NOTE: FOR MIXED PORTING IN THE BEARING CARRIER REFER TO THE P197 SERIES CODES.
PERMCO MODEL: 360 BEARING CARRIER SMALL PARTS
CODE QTY PART NUMBER D E S C R I P T I O N
** 4 921-01380 360 BUSHING

** All bearing carriers except those listed below.

B 4 921-01380 360 BUSHING

B 1 565-01270 7/8" ORB PLUG,HOLLOW HEX

C 4 921-01380 360 BUSHING

C 1 565-01270 7/8" ORB PLUG,HOLLOW HEX
PERMCO MODEL: 360 Connecting Shaft
CODE QTY PART NUMBER D E S C R I P T I O N
1 1 022-01393 360 CONNECTOR SHAFT
 PLASTIC PLUGS FASTENERS FOR SINGLE UNITS FASTENERS FOR DOUBLE UNITS
NPT & BSPP Flush Extended
Port size Part#
Gear Size Part # Bolt Length Qty.
1/8” #8 Dual Section 9.0 11.0
1/4” #11 1/2” W1-58 4-1/2” 4
3/8” #17 3/4” W1-58 4-1/2” 4
1” W1-14 5” 4
Triple Section 13.5 15.5
1/2” #23
3/4” #30 1-1/4” W1-14 5” 4
1” #42 1-1/2” W1-78 5-1/2” 4 Quad Section 18.0 20.0
1-1/4” #53 1-3/4” W1-78 5-1/2” 4
1-1/2” #57 2” W1-65 6” 4 ***Add total gear width + above dimension
2” #68 2-1/4” W1-65 6” 4 to obtain stud length.
2-1/2” #78 2-1/2” W1-89 6-1/2” 4
Washer # W033-2 4
Washer # W033-2 4 Nut # W3-65 4
JIC
1/2” #23 Stud # Description
3/8” #17 ZD-0391-08 5/8-11 x 8”
5/8” #27 Shaft Protectors ZD-0391-875 5/8-11 x 8.75”
3/4” #35 ZD-0391-09 5/8-11 x 9”
7/8” #42 ZD-0391-095 5/8-11 x 9.5”
1” #44 SP-1000-3 1”Dia. 1 ZD-0391-10 5/8-11 x 10”
1-1/4” #53 SP-1000-4 1-1/4” Splined & 1-1/8”Dia 1 ZD-0391-105 5/8-11 x 10.5”
1-1/2” #57 SP-1000-5 1-1/4” Dia Keyed 1 ZD-0391-112 5/8-11 x 11.25”
ZD-0391-12 5/8-11 x 12”
SF & metric SF ZD-0391-125 5/8-11 x 12.5”
ZD-0391-132 5/8-11 x 13.25”
1/2” #12 Shaft Protectors ZD-0391-14 5/8-11 x 14”
3/4” B-831-213 for extended studs ZD-0391-142 5/8-11 x 14.25”
1” B-831-214 ZD-0391-16 5/8-11 x 16”
1-1/4” B-831-215 SP-1000-7 2 ZD-0391-18 5/8-11 x 18”
1-1/2” B-831-216 ZD-0391-20 5/8-11 x 20”
2” B-831-217 ZD-0391-22 5/8-11 x 22”
2-1/2” B-831-218 ZD-0391-24 5/8-11 x 24”
ZD-0391-26 5/8-11 x 26”
ZD-0391-28 5/8-11 x 28”
ZD-0391-30 5/8-11 x 30”
ZD-0391-36 5/8-11 x 36”
ZD-0391-40 5/8-11 x 40”