Rohit Kumar Korad

Current Location: Electronic city Bangalore,India Email ID- [email protected]

Contact no- +91- 7411614772

Key Expertise
Almost 4.9 years of experience in verification and validation (V&V) in embedded system. Experience in industrial
products, aerospace and automotive domain. Looking forward to enhance my knowledge base & experience in
automotive sector.

Summary
 Automotive Testing: Vehicle Diagnostic testing ,System Behavior testing ,ECU testing.

 ECU testing and Analysis :Vector CANoe and CANalyzer

 Experience in test bench setup.

 Experience in CAPL scripting and C programming

 Experience in CAN, UDS ,SPI,I2C,UART protocol.

 Experience in understanding customer requirements and Test case Design.

 Experience in GITHUB and JIRA for tracking record of defects and bug fixing.

 Knowledge on software testing life cycle(STLC) and software development life cycle(SDLC).

Skills
Tools Vector CANoe, CANalyzer, DET

Compiler/debugger GCC compiler, Keil IDE, Code composer studio(CCS),Arduino IDE,JIRA

Programming Languages Embedded C, basic assembly language, CAPL script

Standards ISO 26262, ISO 14229, Bosch 2.0

Communication Protocols CAN,SPI,I2C,UART

Hardware Power supply, Oscilloscope, Multimeter, CANCASE, Loadbox,Function

Generator,ECU

Professional Experience
Associate Engineer (verification and validation)
HCL Technologies Ltds, Bangalore (Nov 2019 - Present)
 ADAS Project – Driver monitoring system(DMS)

Advanced driver assistance system is an active safety system.The driver Monitoring System(DMS) includes a CCD

camera placed on the steering column which is capable of eye tracking via infrared LED detectors. If the driver is not

paying attention to the road ahead and a dangerous situation is detected, the system will warn the driver by flashing

lights, warning sounds or any action will be taken.

 Role & Responsibilities:
i. Understanding customer requirements and developing test cases .

ii. Automate the test cases using CAPL script and in vector CANoe.

iii. Testing modules GGDS(Generic Global Diagnostic Specification) includes Diagnostic services testing

,automated test cases using Diagnostic script player and report file to customer.

iv. Testing Diagnostic protocol –UDS(services $10,$11,$27,$19,$14,$22,$2E,$31).

v. Manual test of ECU voltage monitoring ,diagnostic services and CAN protocol using CANalyzer and

DET.

vi. Testing CAN communication from tester to ECU using CAPL script and CANoe.

vii. Analyzing the bugs/defects,tracking and report to team using JIRA and re-test after bug fixing.

System testing Engineer

Tonbo Imaging India pvt ltd , Bangalore (Feb 2017 – Nov 2019)
 Product: Design and manufacturer of EO/IR vision system for defence system.

Clients:HAL (Hindustan aeronautic limited) and defense companies in Europe.

 Project 1:Pan/Tilt System –EO IR search & tracking system

Its modular design enables you to carry payload on top and / or on side of upto 50kgs with Long Range
Electro Optics, laster system.

Role & Responsibilities:

i. Understanding customer requirements and design test cases of product.

ii. Testing different modules interface with ECU and testing communication protocols
CAN,SPI,I2C,UART.
iii. Used Vector tool to test CAN communication and integration test using CANoe ,CAPL script
and CANalyzer.
iv. Module testing of products,ECU testin(shortcircuit test, voltage monitoring test and other
electrical parameters)
v. Reporting bugs to developers and ensure bugs are fixed before delivery.
vi. Tools used for testing Logic Analyzer, oscilloscope, multimeter, function generator,loadbox
etc.
vii. Used GITHUB for pulling code and modification and JIRA for bug/defect tracking and
reporting to developer and re-testing.

 Project 2:Navel system – Stabilised electro optical system

Dual axis FOD stabilised panoramic electro optical sight for naval platform. It is designed as a modular but
integrated system with a cooled MW IR thermal imager, low light CCD camera, laser range finder for
surveillance, reconnaissance and target acquisition.

Role & Responsibilities:

 i. Interfacing peripherals such as :sensors, GPS modules, display modules, DAC,ADC boards with
microcontrollers .
ii. Testing communication protocols CAN,SPI,I2C,UART using CANalyzer and Oscilloscope / logic
analyzer.
iii. Flashing code and unit testing of the modules using Code composer Studio(CCS),Arduino IDE.
iv. Functional testing of the camera system using UI.
v. Very good in schematic reading and understanding datasheets.
vi. Involved in low level API development in Embedded C.
vii. Detectors calibration and testing features using VIVADO programmer.

 Project 3:Land system – Stereo vision thermal imager(Camera used for night vision)

Sterio vision thermal imager is the smallest, lightest, shutterless, low power rugged thermal imaging
module with stereo 3D vision for driver vision enhancement and similar applications. This is one of its
kind thermal imager with stereo 3D depth perception..
Role & Responsibilities:
i. Understanding customer requirements and specification and create test strategies for prototype or

sample testing and unit testing.

ii. Integration test of camera vision system between ECUs in CAN network using CANalyzer.

iii. Flashing code to ECU and interface with peripherals using code composer studio(CCS).

iv. Automation test of CAN communication and ECU test using CANoe.

v. Manual testing and integration of modules, ECU testing and complete product using UI.
vi. Testing communication protocols CAN,SPI,I2C,UART.
vii. Worked with developers for API development using Embedded C.

viii. Follow up on bugs with developers and ensure bugs are fixed before delivery(use JIRA).
Testing engineer
Triphase Technologies india pvt ltd ,Bangalore (May 2013 – Jan 2015)
Products: Medical Devices, automotive components,Telecom devices, water purifiers, LED lamp used in

telecom/medical/consumer electronics industry.

Role and responsibilities:

i. Understanding customer requirements and specification and prepare test plans .Record test reports

and submit to customers.

ii. Preparing test bench setup.

iii. Flashing microcontrollers using Renesas programmer.System testing using UI.

iv. Manual ECU test in different voltage mode short circuit, over voltage mode, threshold voltage,

saturation level.

v. Manual Testing communication protocols CAN,SPI,UART.

 vi. Automation and manual hardware PCB testing and debugging using schematic diagram and

datasheets.Tools used fo testing are Oscilloscope,multimeter, autotransformer ,load jigs.

vii. Small Schematic and PCB design using OrCAD.PCB soldering.

Personal Qualities

 Self-motivated and a quick Lerner to new tools and technologies.

 Excellent communication with customer and team members.

 Ability to work in team and produce best solutions.

Academia

Qualification College/University Stream/Subject Duration % /cgpa

B Tech MITM,Bhubaneswar,Odisha,India Electronics & Communication 2016 - 2019 7.1

Engineering

Diploma NTTF,Gopalpur,Odisha,India Electronics 2010 - 2013 75

12th Remuna Science 61

college,Blasore,Odisha,India

10th U.B High 69.9

school,Bhanjanagar,Odisha,India

Personal Details
Full name : Mr.Rohit Kumar Korad

Languages : English, Hindi, Odia

Permanent address : #201,Rajarani apartment,Khodasinghi,Berhampur,Ganjam,Odisha,India ,760010

Declaration

I hereby declare that the information mentioned above is true to the best of my knowledge.

Place : Bangalore

Date : (Rohit Kumar Korad)