Scribd
Upload
79 views

Schedule of Requirement: List of BHEL Spares For Other Dehar Machines

The document is a schedule of requirements listing items needed for maintenance and repair of units 2 and 5 at a power plant. It includes 6 types of stator bars, consumable repair items like tapes and wedges, rotor fan locking items, and spare parts like field coil assemblies and rotor lead assemblies for units 2 and 4. The total listed items are to be supplied for maintenance work on the specified units.

Uploaded by

Xen Operation DPH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
79 views

Schedule of Requirement: List of BHEL Spares For Other Dehar Machines

The document is a schedule of requirements listing items needed for maintenance and repair of units 2 and 5 at a power plant. It includes 6 types of stator bars, consumable repair items like tapes and wedges, rotor fan locking items, and spare parts like field coil assemblies and rotor lead assemblies for units 2 and 4. The total listed items are to be supplied for maintenance work on the specified units.

Uploaded by

Xen Operation DPH
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

SCHEDULE OF REQUIREMENT

Sr. Description Qty.


No. (in Nos.)
a b c
1. Bottom stator bar long pushed, 2 2510520011-06 suitable for unit no. 2 6 nos.

2. Top stator bar long pushed, 2 2510520011- 05 suitable for unit no. 2 6 nos.

3. Bottom stator bar short pushed , 2 2510520011- 04 suitable for unit no. 2 6 nos

4. Top stator bar short pushed, 2 2510520011-03 Suitable for unit no. 2 6 nos.

5. Bottom stator bar normal, 2 2510520011-02 suitable for unit no. 2 60 nos.

6. Top stator bar normal, 2 2510520011-01 suitable for unit no. 2 140 nos.

7. Consumable items (Suitable for unit no. 2) as per Annexure- A1 1 set

8. HS lubrication system with AC motor & pump complete in all respect, drg. no., 2 sets
32550501400(Rev. 04)
9. Rotor Fan locking items as per Annexure-A2 1 set

10. List of BHEL spares for other Dehar machines

a) F- class field coil assembly as per drg. no.02530220012-03 suitable for Unit no.2 & 6 nos.
4
b) Rotor lead assembly suitable for Unit no.1 to 4 complete in all respects including 2 sets
collector to spider inside shaft & spider to poles (drg. no. H-3005221)
c) Rotor lead assembly suitable for Unit no.5 (Fixing specification shall be as per new 1 set
shaft procured vide PO 553/PHD/Dehar/383 dated 27.04.2011) complete in all
respect including collector to spider inside shaft & spider to poles, drg. no.
H-3005420
11. Motor pump set for LP lubricating system as per drg. no. G-3017812-3 1 no.

1
Annexure-AI

LIST OF CONSUMABLE ITEMS(Suitable for unit no. 2)

Sr. no. Description of Item Quantity

1. 0.13 TK*25 ISOPH VAR terylene tape 100 roll

2. 0.16 TK*20 silicone bonded glass backed mica 500 roll


paper tape
3. 0.13TK*20 glass fiber woven tape 200 roll

4. 2.5TK*40 Pre-impreg. expoxidised polyester felt 100 meter

5. Brazing wire dia. 2.5mm Rupatum–14 100 kg

6. Solder Tin/Lead 60/40 65 kg

7. Brazing flux Rupatum–A 5 kg

8. Brazing foil Rupatum –14 30 kg

9. Epoxy Glass Separator 100 nos.

10. Epoxy Glass Texolite Under Wedge Packer (800 x 200 nos.
19.7 x 0.5 mm)
11. Epoxy Glass Texolite Under Wedge Packer (800 x 200 nos.
19.7 x 0.8 mm)
12. Epoxy Glass Separator (800 x 710 x 3 mm) 60 nos.

13. Ripple spring 800 nos.

14. Slot Wedge Complete Set 60 set

15. Set of End Winding Packing 150 set

16. Keroclean cream 4 kg

17. Keodex cream 4 kg

18. Aluminium foil 5 packets

19. Emery tape(coarse) 50 nos.

20. Emery tape(fine) 50 nos.

21. Silica powder 400 Mesh 70 kg

22. Epoxy mica putty 5 kg

2
Annexure-A2
LIST OF ITEMS FOR ROTOR FAN LOCKING

Sr. no. Name of the item Qty.

1. 1 1/2'' BSW x 4 3/4'' lg. hex. hd. S. Screw - 4 nos as per drg. no. 4 nos.
D3402048 (2) for Bottom Fan
2. 1 1/2'' BSW x 4 3/4'' lg. hex. hd. S. Screw - 4 nos as per drg. no. 4 nos.
D3402048  (1) for Top Fan
3. Clamp Bush (top) as per drawing no. D 3276444(1) 4 nos.
4. Clamp Bush (Bottom) as per drawing no. D 3276444(2)  4 nos.
5. Locking Plate as per drawing no. B3402048 8 nos.

3
4

You might also like