Scribd
Upload
112 views1 page

Sealant Technologies: Gasket Type: IBC (Inside Bolt Circle Is Like Ring Gasket)

This document provides gasket dimensions for IBC (Inside Bolt Circle) gaskets according to EN 1514.1:1997. It lists the nominal size, inside diameter, outside diameter, and applicable PN ratings for gasket dimensions from DN10 to DN800. Tolerances for inside and outside diameter are provided depending on nominal size.

Uploaded by

Acrylic NFTs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
112 views1 page

Sealant Technologies: Gasket Type: IBC (Inside Bolt Circle Is Like Ring Gasket)

This document provides gasket dimensions for IBC (Inside Bolt Circle) gaskets according to EN 1514.1:1997. It lists the nominal size, inside diameter, outside diameter, and applicable PN ratings for gasket dimensions from DN10 to DN800. Tolerances for inside and outside diameter are provided depending on nominal size.

Uploaded by

Acrylic NFTs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Sealant Technologies Gasket Dimensions

EN 1514.1 : 1997

Gasket Type: IBC (Inside Bolt Circle is like Ring Gasket)


A B
Outside Diameter
Standard ID GLS ID [mm]
DN
[mm] [mm]
PN 2,5 PN 6 PN 10 PN 16 PN 25 PN 40
10 18 – 39 39 46 46 46 46
15 22 18 44 44 51 51 51 51
20 27 25 54 54 61 61 61 61
25 34 31 64 64 71 71 71 71
32 43 38 76 76 82 82 82 82
40 49 46 86 86 92 92 92 92
50 61 57 96 96 107 107 107 107
65 77 70 116 116 127 127 127 127
80 89 85 132 132 142 142 142 142
100 115 110 152 152 162 162 168 168
125 141 135 182 182 192 192 194 194
150 169 160 207 207 218 218 224 224
200 220 210 262 262 273 273 284 290
250 273 265 317 317 328 329 340 352
300 324 315 373 373 378 384 400 417
350 356 345 423 423 438 444 457 474
400 407 390 473 473 489 495 514 546
450 458 445 528 528 539 555 564 571
500 508 495 578 578 594 617 624 628
600 610 595 679 679 695 734 731 747
700 712 – 784 784 810 804 833 –
800 813 – 890 890 917 911 942 –

DN: Nominal Size, ID: Inside Diameter, GLS: Glass-Lined Steel

Dimensions applicable to:


Standard/ID Option
ASME B16.21
• Flanges according to EN1092-1 among others EN 1514-1
A
Comments/Use
Tolerances: - ID per applicable standard
- General use in steel flanges
Inside Diameter Standard/ID Option
For DN 300 and smaller: +/-1.5 mm ASME B16.21 / GLS ID
EN 1514-1 / GLS ID
For DN 350 and larger: +/-3.0 mm B
Comments/Use
Outside Diameter - ID reduced to protect glass lining
- Best option for glass lined steel flanges
For DN 300 and smaller: +0/-1.5 mm
For DN 350 and larger: +0/-3.0 mm

You might also like