! DO NOT REMOVE!

Version:8 Time saved:Tue Oct 9 13:26:39 2018=1539091599

! EH (global order: 0001; local order: 0) :------
! EH configuration
telecom_standard etsi
! command group end
! LH (global order: 0003; local order: 0) :------
! LH configuration
ftp svrs name "remotehost" address 10.0.0.2 port 21 user 798909896149095131
password 798909896149095131 servertype FTP
ftp svrs name "localhost" address 10.0.0.2 port 21 user 798909896149095131 password
798909896149095131 servertype FTP
ftp activeftp "remotehost"
ftp active software-upgrade "remotehost"
ftp active backup-configuration "remotehost"
ftp active autobackup-configuration "remotehost"
ftp active error-log "remotehost"
ftp active diagnostic-logs "remotehost"
ftp active license-install "remotehost"
ftp active license-report "remotehost"
ftp active configuration-report "remotehost"
ftp active ne-pm "remotehost"
ftp active soam-pm "remotehost"
ftp active audit-log "remotehost"
ftp active dir-list "remotehost"
ftp active ntp-key-server "remotehost"
ftp active fint-upload-report "remotehost"
timezone Etc UTC
! command group end
! EH (global order: 0100; local order: 3) :------
! CF configuration
! command group end
! SU (global order: 0101; local order: 0) :------
! SU Configuration
su-activerelease 1
su-release CXP9036600_1 MINI-LINK_6600_6366_1.6_R7C126 1
su-release CXP9036600_1 MINI-LINK_6600_6366_1.6_R7C126 2
su-sbl_type 1 1
su-sbl_type 2 1
su-loadmodule CXP9029630_2 R7C126 1
su-loadmodule CXP9029630_3 R7C126 1
su-loadmodule CXP9029630_5 R7C126 1
su-loadmodule CXP9029630_1 R7C126 1
su-loadmodule CXP9029630_4 R7C126 1
su-loadmodule CXP9029630_6 R7C126 1
su-loadmodule CXP9029630_7 R7C126 1
su-loadmodule CXP9011133_32 R6D04 1
su-loadmodule CXP9011133_34 R6D04 1
su-loadmodule CXP9034290_1 R4A148 1
su-loadmodule CDA1020603_1 R1E02 1
su-loadmodule CDA1020659_1 R1C02 1
su-manual CXP9029630_2 R7C126 1 0
su-manual CXP9011133_34 R6D04 2 0
su-manual CXP9013640 R1G04 3 0
su-committype 1
su-version_control 1
! command group end
! LH (global order: 0150; local order: 1) :------
! LH syslog configuration
rsyslog trapseverity 0x0
rsyslogsec events protocols all 0
rsyslogsec events login all 0
rsyslogsec events localauth all 0
rsyslogsec events tacacs all 0
rsyslogsec events radius all 0
! command group end
! EH (global order: 0200; local order: 2) :------
! EH configuration
subrack 1 backplane 30 "ROA 117 7335/1" "P10B"
subrack 1 name ""
subrack 1 poweradmin disable
board 1/0 type "ROA 117 7335/1" "P10B" "15"
board 1/1 type "ROA 117 7335/1_MMU" "P10B" "13"
userio
exit
sys_notes "You can add information in this Description field that will be included
in the Node Report, for example additional notes for troubleshooting or archiving
purposes. Max allowed numbers of characters in this Description field is 800."
config-changed-timer 900
! command group end
! LICH (global order: 0210; local order: 0) :------
! LICH configuration
license grace 0
license unlockfeature FAL1241127 0
license unlockfeature FAL1241479 0
license unlockfeature FAL1241480 0
license unlockfeature FAL1242886 0
license unlockfeature FAL1242887 0
license unlockfeature FAL1242888 0
license unlockfeature FAL1242889 0
license unlockfeature FAL1242892 0
license unlockfeature FAL1242893 0
license unlockfeature FAL1242894 0
license unlockfeature FAL1242895 0
license unlockfeature FAL1242896 0
license unlockfeature FAL1242897 0
license unlockfeature FAL1242898 0
license unlockfeature FAL1242899 0
license unlockfeature FAL1242900 0
license unlockfeature FAL1242901 0
license unlockfeature FAL1242902 0
license unlockfeature FAL1242903 0
license unlockfeature FAL1242904 0
license unlockfeature FAL1242905 0
license unlockfeature FAL1242906 0
license unlockfeature FAL1242907 0
license unlockfeature FAL1242908 0
license unlockfeature FAL1242909 0
license unlockfeature FAL1242910 0
license unlockfeature FAL1242911 0
license unlockfeature FAL1242912 0
license unlockfeature FAL1242913 0
license unlockfeature FAL1242914 0
license unlockfeature FAL1242915 0
license unlockfeature FAL1242921 0
license unlockfeature FAL1242923 0
license unlockfeature FAL1242971 0
license unlockfeature FAL1243038 0
license monitoring-auto-unlock disable
license restrict-unlocked-period disable
license monitoring-auto-unlock disable
license restrict-unlocked-period disable
! command group end
! EH (global order: 0215; local order: 1) :------
! NPU protection configuration
! command group end
! EH (global order: 0220; local order: 4) :------
! SEC configuration
security alarm-enable 96
security cli-logon
security snmp-logon
security dcn-connectivity
security auditLogFtpTransferComplete
! command group end
! SM (global order: 0256; local order: 0) :------
! SNMP server configuration
snmp-server encryptionEnable 0
!
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.7 1 5 0 1
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.9 1 5 0 1
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.8.3 1 5 0 1
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.4.3.1 1 5 0 1
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.13.2.3 1 5 0 1
snmp-server view "closedView" 1.3.6.1.4.1.193.81.2.1.1.1.1.4 1 5 0 1
snmp-server view "completeWriteView" 1.2 1 5 0 1
snmp-server view "completeWriteView" 1.3 1 5 0 1
snmp-server view "viewUserWriteview" 1.3.6.1.6.3.12 1 5 0 1
snmp-server view "viewUserWriteview" 1.3.6.1.6.3.13 1 5 0 1
snmp-server view "viewUserWriteview" 1.3.6.1.4.1.193.81.2.4.4.3 1 5 0 2
!
!
snmp-server group "oper_user" 3 "operGroup" 1 3
snmp-server group "view_user" 3 "viewGroup" 1 3
snmp-server group "control_user" 3 "controlGroup" 1 3
!
snmp-server access "operGroup" 0 1 3 2 "completeView" "operUserWriteview"
"completeView" 1 3
snmp-server access2 "operGroup" 0 1 3 2 "completeView" "operUserWriteview"
"completeView" 1 3
snmp-server access "readGroup" 0 1 0 1 "systemView" "0" "0 " 1 3
snmp-server access2 "readGroup" 0 1 0 1 "systemView" "0" "0 " 1 3
snmp-server access "trapGroup" 0 1 0 1 "0 " "0" "completeView" 1 3
snmp-server access2 "trapGroup" 0 1 0 1 "0 " "0" "completeView" 1 3
snmp-server access "viewGroup" 0 1 3 2 "completeView" "viewUserWriteview"
"completeView" 1 3
snmp-server access2 "viewGroup" 0 1 3 2 "completeView" "viewUserWriteview"
"completeView" 1 3
snmp-server access "writeGroup" 0 1 0 1 "systemView" "0" "0 " 1 3
snmp-server access2 "writeGroup" 0 1 0 1 "systemView" "0" "0 " 1 3
snmp-server access "controlGroup" 0 1 3 2 "completeView" "completeView"
"completeView" 1 3
snmp-server access2 "controlGroup" 0 1 3 2 "completeView" "controlUserWriteview"
"completeView" 1 3
!
snmp-server targetaddr "externAccess" 1.3.6.1.6.1.1 0.0.0.0:0 1500 3 "external" "0"
1 3
snmp-server targetaddr "externAccessIPv6" 1.3.6.1.2.1.100.1.2 ::@0 1500 3
"external" "0" 1 3
!
!
snmp-server notifyparams "node_traps" "trap" 1 1 5
!
!
!
snmp-server syscontact "Contact"
!
!
snmp-server syslocation "Location"
!
snmp-server snmpenableauthentraps 1
!
snmp-server trapEnable 1
!
snmp-server community "index1" "Ericsson_r" "ext_pub" "external" 3 1
snmp-server community "index2" "Ericsson_t" "ext_trap" "trap" 3 1
snmp-server community "index3" "Ericsson_w" "ext_priv" "external" 3 1
!
snmp-server targetext "externAccess" 000000000000 484
snmp-server targetext "externAccessIPv6" 000000000000000000000000000000000000 484
!
snmp-server confirmip 0a000002
!
!
snmp-server encryptionEnable 0
!
setlocaluseridletimer 15
setaaaPolicyStatus 1
setenablelocalusers 1
!
!
! command group end
! SM (global order: 0264; local order: 1) :------
! SNMP other configuration
! command group end
!
setwebprotocol https
! SFPH (global order: 0310; local order: 0) :------
! SFPH configuration
sfp 0/5
select 0x380D
trap-enable
no shutdown
als mode 3
exit
! command group end
! RLPS (global order: 0330; local order: 0) :------
! RLPSH configuration
rlt 1/1/1
setwanspeedmode 2
exit
rlps configchannelgroup 2146443393 1 5 3 0 0 0 -1 -1 "" 0 0 1 0 0
rlps configchannelgroup 2146443394 1 6 4 0 0 0 -1 -1 "" 0 0 1 0 0
rlps confiwancapacity 1/1/1 2134646913 0 0 0 0 0 0
rlps xflimappingentry 3 2129666177 "FCT 1/1/1" "RAUIF" 1 1
rlps xflimappingentry 4 2129666178 "FCT 1/1/2" "RAUIF" 1 2
rlps xflimappingentry 5 2146443393 "CT 1/1/1" "RAUIF" 1 1
rlps xflimappingentry 6 2146443394 "CT 1/1/2" "RAUIF" 1 2
rlps xftrafficentryv2 1 3 1 1 1
rlps xftrafficentry 1 3 1 1
rlps xftrafficentry 2 3 1 1
rlps xfrltentry 1 "RLT 1/1/1" " " 3 1 2 1 0 2 200 1 1 1
rlps xfrltentry 2 "FRLT 1/1/1" " " 3 1 2 1 0 2 200 2 1 1
! SDHP (global order: 0510; local order: 1) :------
! SDHP configuration
! command group end
! NANS (global order: 0800; local order: 0) :------
! NANS configuration
! command group end
! RL4 (global order: 0910; local order: 0) :------
rl4 xfRauTable 1 1 1 1 0 "You can add information in this description field that
will be included in the Node Report, for example polarization, antenna type or
logging a site visit. Max allowed numbers of characters in this description field
is 800."
rl4 xfRauTableV2 1 1 1 1 255 "You can add information in this description field
that will be included in the Node Report, for example polarization, antenna type or
logging a site visit. Max allowed numbers of characters in this description field
is 800."
rl4 xfRfIfPowerTable 1 1 1 2 1 10 10 -30 2 -93
rl4 xfRfIfPowerTableV2 1 1 1 2 1 10 10 -30 2 -93 2
rl4 xfRfIfPowerTableV3 1 1 1 2 1 10 10 -30 2 -93 2 2
rl4 xfRfIfPowerTableV4 1 1 1 2 1 10 10 -30 2 -93 2 2 3
rl4 rauParameters 1 1 1 1 23671 19094725 18002225 25 255 255 1 26971 25 1
rl4 rauParametersV2 1 1 1 1 23671 19094725 18002225 25 255 255 1 26971 25 1 0 18
255
! TH (global order: 1000; local order: 0) :------
! TH (global order: 1010; local order: 1) :------
! TH (global order: 1020; local order: 2) :------
! TH (global order: 1030; local order: 3) :------
fault-filtertime 5
! TH (global order: 1040; local order: 4) :------
no network-synch node_clock_enable
network-synch forcedswitch 0
network-synch selectionmode qlEnable
no network-synch squelch
no network-synch enable
! PM (global order: 1100; local order: 0) :------
! PM configuration
pm
pm24hour_interval 0 0 0
! Only objects that are different from default values are saved.
exit
! command group end
! SDHP (global order: 1110; local order: 0) :------
! SDHP configuration
! command group end
! EPS (global order: 1151; local order: 0) :------
! EPS Configuration
eps-config-version 45
! ethernet-profiles
ethernet-profiles
hqos-profiles
hqos-node PORT_DEFAULT id 1
exit
exit
exit
! bridge-basics
bridge variant 4
bridge mode dot1 q
bridge tp-agingtime 300
bridge priority-mapping type d-std
bridge network-pcp-selection 8p0d
bridge customer-BPDU discard
bridge priority-mapping map 0 2
bridge priority-mapping map 1 0
bridge priority-mapping map 2 1
bridge priority-mapping map 3 3
bridge priority-mapping map 4 4
bridge priority-mapping map 5 5
bridge priority-mapping map 6 6
bridge priority-mapping map 7 7
bridge l2cpmacdesttunnel a0:ad
bridge l2cppriority 4
bridge scheduler-profile 1
bridge queue-set-profile 1
no bridge aging enable
bridge aging 0 84
bridge aging 1 84
bridge aging 2 84
bridge aging 3 84
bridge aging 4 84
bridge aging 5 84
bridge aging 6 84
bridge aging 7 84
! spanning tree
no spanning-tree enable
spanning-tree type rstp
spanning-tree force-version rstp
spanning-tree transmit-holdcount 6
spanning-tree priority 32768
spanning-tree max-age 2000
spanning-tree forward-delay 1500
! eth
interface ethernet 1/0/3
!LAN 1/0/3 - Port 3
no shutdown
trapenable
role uni
lan
no alarm-enable ethernet-down
speed auto-detect
mdix auto
no flowcontrol
autoneg
no sync-enable
no alarm-enable sync-unsupported
! Ethernet link OAM
ethernet-oam
no admin-state
mode passive
ignore-loopback
frame window 10
frame threshold 1
frame-period threshold 1
frame-secs-summary window 100
frame-secs-summary threshold 1
 no symbol-period
no frame-period
no frame
no frame-secs-summary
no dying-gasp
no critical-event
no alarm-enable linkfault
no alarm-enable loopback
no disable-support loopback
no disable-support event
symbol-period threshold 1
exit
exit
bridge-port
maxfs 2000
no mac-whitelist
admit untagged priority-tagged vlan-tagged
pvid 3059
no stormctrl bc
no stormctrl mc
no stormctrl dlf
stormctrl maxbcbw 100
stormctrl maxmcbw 100
stormctrl maxdlfbw 100
no max-learned-addresses
no forbidden-egressports
l2cp bpdu discard
l2cp macpause discard
l2cp lacp discard
l2cp lamp discard
l2cp linkoam discard
l2cp futurestdslow discard
l2cp portauth802dot1x discard
l2cp futurestdbridge discard
l2cp allbridgeaddr discard
l2cp gmrp discard
l2cp gvrp discard
l2cp futurestdgarp discard
l2cp pbpdu discard
l2cp pgvrp discard
l2cp lldp discard
l2cp esmc discard
no spanning-tree port-enable
spanning-tree port-priority 128
spanning-tree path-cost 0
spanning-tree autoedge
spanning-tree mac-enable
no spanning-tree admin-edgeport
no spanning-tree admin-pointtopoint
exit
qos
default-network-priority 0
trusted ctagPcp
user-priority-mapping 0 0
user-priority-mapping 1 1
user-priority-mapping 2 2
user-priority-mapping 3 3
user-priority-mapping 4 4
user-priority-mapping 5 5
 user-priority-mapping 6 6
user-priority-mapping 7 7
policing
mode noPolice
default-cos 0
port-bandwidth-profile 1
exit
lock-to-service
deep-buffering
scheduler-profile 1
queue-set-profile 1
hqos-profile 1
exit
exit
interface ethernet 1/0/4
!LAN 1/0/4 - Port 2
shutdown
trapenable
role inni
lan
no alarm-enable ethernet-down
speed auto-detect
mdix auto
no flowcontrol
autoneg
no sync-enable
no alarm-enable sync-unsupported
! Ethernet link OAM
ethernet-oam
no admin-state
mode passive
ignore-loopback
frame window 10
frame threshold 1
frame-period threshold 1
frame-secs-summary window 100
frame-secs-summary threshold 1
no symbol-period
no frame-period
no frame
no frame-secs-summary
no dying-gasp
no critical-event
no alarm-enable linkfault
no alarm-enable loopback
no disable-support loopback
no disable-support event
symbol-period threshold 1
exit
exit
bridge-port
no stormctrl bc
no stormctrl mc
no stormctrl dlf
stormctrl maxbcbw 100
stormctrl maxmcbw 100
stormctrl maxdlfbw 100
no max-learned-addresses
no forbidden-egressports
 no spanning-tree port-enable
spanning-tree port-priority 128
spanning-tree path-cost 0
spanning-tree autoedge
spanning-tree mac-enable
no spanning-tree admin-edgeport
spanning-tree admin-pointtopoint auto
exit
qos
default-network-priority 0
lock-to-service
deep-buffering
scheduler-profile 1
queue-set-profile 1
hqos-profile 1
exit
exit
interface ethernet 1/0/5
!LAN 1/0/5 - Port 8
shutdown
trapenable
role inni
lan
no alarm-enable ethernet-down
speed full-duplex1000
mdix auto
no flowcontrol
autoneg
no sync-enable
no alarm-enable sync-unsupported
! Ethernet link OAM
ethernet-oam
no admin-state
mode passive
ignore-loopback
frame window 10
frame threshold 1
frame-period threshold 1
frame-secs-summary window 100
frame-secs-summary threshold 1
no symbol-period
no frame-period
no frame
no frame-secs-summary
no dying-gasp
no critical-event
no alarm-enable linkfault
no alarm-enable loopback
no disable-support loopback
no disable-support event
symbol-period threshold 1
exit
exit
bridge-port
no stormctrl bc
no stormctrl mc
no stormctrl dlf
stormctrl maxbcbw 100
stormctrl maxmcbw 100
 stormctrl maxdlfbw 100
no max-learned-addresses
no forbidden-egressports
no spanning-tree port-enable
spanning-tree port-priority 128
spanning-tree path-cost 0
spanning-tree autoedge
spanning-tree mac-enable
no spanning-tree admin-edgeport
spanning-tree admin-pointtopoint auto
exit
qos
default-network-priority 0
lock-to-service
deep-buffering
scheduler-profile 1
queue-set-profile 1
hqos-profile 1
exit
exit
interface ethernet 1/1/1
!WAN 1/1/1 - Port 1
shutdown
no trapenable
role inni
wan
exit
bridge-port
no stormctrl bc
no stormctrl mc
no stormctrl dlf
stormctrl maxbcbw 100
stormctrl maxmcbw 100
stormctrl maxdlfbw 100
no max-learned-addresses
no forbidden-egressports
no spanning-tree port-enable
spanning-tree port-priority 128
spanning-tree path-cost 0
spanning-tree autoedge
spanning-tree mac-enable
no spanning-tree admin-edgeport
spanning-tree admin-pointtopoint auto
exit
qos
default-network-priority 0
lock-to-service
deep-buffering
scheduler-profile 1
queue-set-profile 1
hqos-profile 1
exit
exit
interface ethernet 1/0/0
!LAN-DCN 1/0/0 - Port 4
role uni
bridge-port
maxfs 2000
no mac-whitelist
 admit untagged priority-tagged vlan-tagged
pvid 3059
no stormctrl bc
no stormctrl mc
no stormctrl dlf
stormctrl maxbcbw 100
stormctrl maxmcbw 100
stormctrl maxdlfbw 100
no max-learned-addresses
no forbidden-egressports
l2cp bpdu discard
l2cp macpause discard
l2cp lacp discard
l2cp lamp discard
l2cp linkoam discard
l2cp futurestdslow discard
l2cp portauth802dot1x discard
l2cp futurestdbridge discard
l2cp allbridgeaddr discard
l2cp gmrp discard
l2cp gvrp discard
l2cp futurestdgarp discard
l2cp pbpdu discard
l2cp pgvrp discard
l2cp lldp discard
l2cp esmc discard
no spanning-tree port-enable
spanning-tree port-priority 128
spanning-tree path-cost 0
spanning-tree autoedge
spanning-tree mac-enable
no spanning-tree admin-edgeport
no spanning-tree admin-pointtopoint
exit
qos
default-network-priority 4
trusted ctagPcp
user-priority-mapping 0 0
user-priority-mapping 1 1
user-priority-mapping 2 2
user-priority-mapping 3 3
user-priority-mapping 4 4
user-priority-mapping 5 5
user-priority-mapping 6 6
user-priority-mapping 7 7
policing
mode noPolice
default-cos 0
port-bandwidth-profile 1
exit
lock-to-service
no deep-buffering
scheduler-profile 1
queue-set-profile 1
hqos-profile 1
exit
exit
! mac whitelist
! L1-Bonding
! vlan
vlan 1
forward-unregistered-multicast
exit
vlan 3059
egressports 1/0/3,1/0/0
untagged-ports 1/0/3,1/0/0
forward-unregistered-multicast
exit
! bridge-port cvid-registration
! qinqtermination
! epl
! lag
lacp lag-sys-priority 32768
! dcn-lan-ctag configuration
! ethernet-alarms
ethernet-alarms
no loop-alarm enable
loop-alarm threshold 10
loop-alarm address ff:ff:ff:ff:ff:ff
loop-alarm members all
exit
mfib alarm-enable
no igmp snooping enable
no mld snooping enable
! command group end
! EPM (global order: 1180; local order: 0) :------
! EPM config:
! EPM Threshold Alarms
ethernet-pm 1/0/3 lan
pmalarmview disable
exit
ethernet-pm 1/0/4 lan
pmalarmview disable
exit
ethernet-pm 1/0/5 lan
pmalarmview disable
exit
ethernet-pm 1/1/1 wan
pmalarmview disable
exit
! RPH (global order: 1190; local order: 0) :------
! INH (global order: 1191; local order: 0) :------
!
! TAC (global order: 1195; local order: 0) :------
set_tacacs_address_Type 1
!
!
! RADS (global order: 1196; local order: 0) :------
set_radius_address_Type 1
!
!
! LH (global order: 1402; local order: 2) :------
! LH DCN security configuration
! command group end
! RH (global order: 2000; local order: 0) :------
! RH Configuration
router config
!
log trap debugging
log audit cli
log audit hal
!
capability vrf-lite
!
max-static-routes 100
!
interface lo
no shutdown
!
line con 0
login
!
end
! command group end
! SOAM (global order: 2012; local order: 0) :------
cfm
exit
! command group end
! SOAM (global order: 2015; local order: 1) :------
! Bandwidth Notification instances
cfm
exit
! command group end
! EPS (global order: 2020; local order: 1) :------
! ERP
! command group end
! EPS (global order: 2021; local order: 2) :------
! LPS
! command group end
! LH (global order: 2100; local order: 3) :------
! LH PPP configuration
! command group end
! RH (global order: 2110; local order: 1) :------
! RH IF configuration
! command group end
! LH (global order: 2150; local order: 4) :------
! LH TWAMP configuration
! command group end
! ECPS (global order: 2200; local order: 0) :------
! ECPS configuration
debug ecps loglevel ERROR
debug ecps configversion 15
ptp
priority1 128
priority2 128
no clock
exit
! command group end
! GANS (global order: 3000; local order: 0) :------
! GANS Configuration
gans-debug-level 0
! command group end
! CI (global order: 9000; local order: 0) :------
! HA (global order: 9100; local order: 0) :------
! HA Configuration
! command group end
! TH (global order: 9999; local order: 5) :------
dxc_sa_start
! END OF FILE
16115