Scribd
Upload
74 views

Technical Data Sheet PVDF

This document provides a technical data sheet for PVDF (polyvinylidene fluoride), listing key properties such as: - Density of 1.780 g/cm3 - Elongation at yield of 8% - Tensile modulus of elasticity of 1950 MPa - Impact strength of 12 kJ/m2 - Ball indentation hardness of 120 MPa - Shore hardness of 78 - Melting point between -30 to +140 °C - Low flammability ratings - Dielectric strength of 25 kV/mm

Uploaded by

Rohith V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
74 views

Technical Data Sheet PVDF

This document provides a technical data sheet for PVDF (polyvinylidene fluoride), listing key properties such as: - Density of 1.780 g/cm3 - Elongation at yield of 8% - Tensile modulus of elasticity of 1950 MPa - Impact strength of 12 kJ/m2 - Ball indentation hardness of 120 MPa - Shore hardness of 78 - Melting point between -30 to +140 °C - Low flammability ratings - Dielectric strength of 25 kV/mm

Uploaded by

Rohith V
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet PVDF

Trade name: PVDF Revision: 06 / 2012


Date of printing: 24.07.2012

PVDF

Data sheet update 06 / 2012

Moulding compound extruded PVDF-E,GG1N,P4E5.J.A.E.C.3,,

Extruded to moulding compound standard ISO 12086-1

Pressed to moulding compound standard ISO 12086-1

Density, g/cm³, 1.780


DIN EN ISO 1183

Elongation at yield, %, 8
DIN EN ISO 527

Yield stress, MPa, 55


DIN EN ISO 527

Tensile modulus of elasticity, MPa, 1950


DIN EN ISO 527

Impact strength, KJ/m², without break


DIN EN ISO 179

Notched impact strength, kJ/m², 12


DIN EN ISO 179

Ball indentation hardness, MPa, 120


DIN EN ISO 2039-1

Shore hardness D, 78
DIN EN ISO 868

Mean coefficient of linear thermal expansion, K-1, 1,3 × 10-4


DIN 53752

Vicat B, °C 140

Fire behaviour DIN 4102 DIN 4102 B1 low flammability


(self-assessment without test
certificate)

Fire behaviour FM 4910 FM 4910 low flammability

Dielectric strength, kV/mm, 25


DIN IEC 60243-1

Surface resistivity, Ohm, 1014


DIN IEC 60093

Temperature range, °C -30 to +140

Physiological safety in accordance with BfR yes


(German Federal Institute for risk valuation)

Physiological safety in accordance with FDA yes

The data presented in this section are to be seen as a guide and may vary depending on the processing method and test
specimen used. In general, the figures are averages of tests performed on extruded sheets with a thickness of 4 mm. In
the case of sheets manufactured by means of pressing, testing is generally performed on sheets with a thickness of 20

Page: 1 of 2
Technical Data Sheet PVDF

PVDF

mm. Deviations may be possible if sheets are not available in these specific thicknesses. In the case of backed sheets,
all technical specifications relate to the non-backed base sheets. Please note that this information is not necessarily
applicable to products that have undergone downstream processing. The suitability of a material for a specific area of
application must be checked by the processor or end user. All technical specifications are provided only as a guide for
planning purposes. They do not constitute a guarantee of specific properties or qualities. For further information, please
contact our Technical Service Centre at [email protected].

Page: 2 of 2

You might also like