Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

1 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

2 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000# show version

Cisco Nexus Operating System (NX-OS) Software
TAC support: http://www.cisco.com/tac
Documents: http://www.cisco.com/en/US/products/ps9372/tsd_product
s_home.html
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

Software
BIOS: version 2.8.0
kickstart: version 6.1(2)
system: version 6.1(2)
BIOS compile time: 06/09/12
kickstart image file is: bootflash:///n7000-s2-kickstart.6.1.2.
kickstart compile time: 12/25/2020 12:00:00 [10/26/2012 04:38:
system image file is: bootflash:///n7000-s2-dk9.6.1.2.bin
system compile time: 9/7/2012 13:00:00 [10/26/2012 05:44:25

Hardware
cisco Nexus7000 C7004 (4 Slot) Chassis ("Supervisor module-2")
Intel(R) Xeon(R) CPU with 32745272 kB of memory.
Processor Board ID JAQH632ANGS

Device name: nexu7000

bootflash: 2007040 kB
slot0: 0 kB (expansion flash)

Kernel uptime is 0 day(s), 18 hour(s), 19 minute(s), 15 second(s)

Last reset at 24374 usecs after Mon Jul 29 20:16:46 2013

Reason: Reset Requested by CLI command reload

3 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

System version: 6.1(2)

Service:

plugin
Core Plugin, Ethernet Plugin

nexus7000# show module

Mod Ports Module-Type Model

--- ----- ----------------------------------- -----------------
1 0 Supervisor module-2 N7K-SUP2E
3 48 10/100/1000 Mbps Ethernet XL Module N7K-M148GT-11L
4 48 1/10 Gbps Ethernet Module N7K-F248XP-25E

Mod Sw Hw
--- -------------- ------
1 6.1(2) 1.0
3 6.1(2) 1.2
4 6.1(2) 1.0

Mod MAC-Address(es) Serial-Num

--- -------------------------------------- ----------
1 84-88-ac-58-02-c3 to 84-88-ac-58-02-e6 EEF4492KKCS
3 00-99-f6-c1-55-ff to 00-ff-f6-83-86-32 JHFCU555RRA
4 84-78-0f-0f-66-ff to 84-78-56-0f-66-39 JQU1714AKOI

Mod Online Diag Status

--- ------------------
1 Pass
3 Pass
4 Pass

* this terminal session

4 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000# show license usage

Feature Ins Lic Status Expiry Date Commen
Count
-----------------------------------------------------------------
MPLS_PKG Yes - Unused 14 Dec 2014 -
STORAGE-ENT No - Unused -
VDC_LICENSES Yes 4 In use 14 Dec 2014 -
ENTERPRISE_PKG No - Unused -
FCOE-N7K-F132XP No 0 Unused -
FCOE-N7K-F248XP No 0 Unused -
ENHANCED_LAYER2_PKG Yes - In use 14 Dec 2014 -
SCALABLE_SERVICES_PKG No - Unused -
TRANSPORT_SERVICES_PKG Yes - Unused 14 Dec 2014 -
LAN_ADVANCED_SERVICES_PKG Yes - In use 14 Dec 2014 -
LAN_ENTERPRISE_SERVICES_PKG Yes - Unused 14 Dec 2014 -
-----------------------------------------------------------------

5 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000# conf t
Enter configuration commands, one per line. End with CNTL/Z.
nexus7000(config)# interface loopback 1
nexus7000(config-if)# ip address 1.1.1.1/32
nexus7000(config-if)# no shutdown
nexus7000(config-if)# exit
nexus7000(config)# exit
nexus7000# checkpoint snapshot0
Done
nexus7000# conf t
Enter configuration commands, one per line. End with CNTL/Z.
nexus7000(config)# interface loopback 1
nexus7000(config-if)# ip address 2.2.2.2/32
nexus7000(config-if)# exit
nexus7000(config)# exit
nexus7000# show running-config interface loopback 1

!Command: show running-config interface loopback1

!Time: Tue Jul 30 15:06:05 2013
version 6.1(2)

interface loopback1
ip address 2.2.2.2/32

nexus7000# rollback ?
running-config Rollback running configuration

nexus7000# rollback running-config ?

checkpoint Rollback running configuration to checkpoint
file Rollback running configuration to configuration fil

nexus7000# rollback running-config checkpoint ?

baseline
snapshot0
snapshot1

nexus7000# rollback running-config checkpoint snapshot0 ?

<CR>
atomic Stop rollback and revert to original con

6 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

best-effort Skip errors and proceed with rollback

stop-at-first-failure Stop rollback at the first error
verbose Show the execution log

nexus7000# rollback running-config checkpoint snapshot0 best-effo

Collecting Running-Config
#Generating Rollback Patch
Executing Rollback Patch
========================================================
`conf t`
`interface loopback1`
`ip address 1.1.1.1/32`
========================================================

Rollback completed successfully.

nexus7000#

7 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000(config)# vdc tinyVdc

Note: Creating VDC, one moment please ...

nexus7000(config-vdc)# do show vdc

vdc_id vdc_name state mac

------ -------- ----- ---
1 nexus7000 active 84:
2 tinyVdc active 84:

nexus7000(config-vdc)# allocate interface ethernet 4/5 - 8

Moving ports will cause all config associated to them in source v

Are you sure you want to move the ports (y/n)? [yes] y

ERROR: 1 or more interfaces are from a module of type not support

8 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000(config-vdc)# limit-resource module-type f2

This will cause all ports of unallowed types to be removed from t

nexus7000(config-vdc)# allocate interface ethernet 4/5 - 8

Moving ports will cause all config associated to them in source v

Are you sure you want to move the ports (y/n)? [yes] y

nexus7000(config-vdc)# do show vdc membership module

vdc_id: 0 vdc_name: Unallocated interfaces:

Ethernet4/17 Ethernet4/18 Ethernet4/19
Ethernet4/20 Ethernet4/25 Ethernet4/26
Ethernet4/27 Ethernet4/28 Ethernet4/29
Ethernet4/30 Ethernet4/31 Ethernet4/32
Ethernet4/33 Ethernet4/34 Ethernet4/35
Ethernet4/36 Ethernet4/37 Ethernet4/38
Ethernet4/39 Ethernet4/40 Ethernet4/41
Ethernet4/42 Ethernet4/43 Ethernet4/44
Ethernet4/45 Ethernet4/46 Ethernet4/47
Ethernet4/48

vdc_id: 6 vdc_name: tinyVdc interfaces:

Ethernet4/5 Ethernet4/6 Ethernet4/7
Ethernet4/8

9 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000# show running-config vdc all

!Command: show running-config vdc

!Time: Mon Jul 29 11:50:54 2013

version 6.1(2)
no vdc combined-hostname
system admin-vdc
vdc nexus7000 id 1
cpu-share 5
limit-resource vlan minimum 16 maximum 4094
limit-resource monitor-session minimum 0 maximum 2
limit-resource monitor-session-erspan-dst minimum 0 maximum 23
limit-resource vrf minimum 2 maximum 4096
limit-resource port-channel minimum 0 maximum 768
limit-resource u4route-mem minimum 96 maximum 96
limit-resource u6route-mem minimum 24 maximum 24
limit-resource m4route-mem minimum 58 maximum 58
limit-resource m6route-mem minimum 8 maximum 8
limit-resource monitor-session-inband-src minimum 0 maximum 1
vdc tinyVdc id 2
limit-resource module-type f2
allow feature-set fabricpath
allow feature-set fex
allow feature-set mpls
cpu-share 5
allocate interface Ethernet4/5-8
boot-order 1
limit-resource vlan minimum 16 maximum 4094
limit-resource monitor-session minimum 0 maximum 2
limit-resource monitor-session-erspan-dst minimum 0 maximum 23
limit-resource vrf minimum 2 maximum 4096
limit-resource port-channel minimum 0 maximum 768
limit-resource u4route-mem minimum 8 maximum 8
limit-resource u6route-mem minimum 4 maximum 4
limit-resource m4route-mem minimum 8 maximum 8
limit-resource m6route-mem minimum 5 maximum 5
limit-resource monitor-session-inband-src minimum 0 maximum 1

10 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

11 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

nexus7000# switchto vdc tinyVdc

---- System Admin Account Setup ----

Do you want to enforce secure password standard (yes/no) [y]: y

Enter the password for "admin":

Confirm the password for "admin":

---- Basic System Configuration Dialog VDC: 6 ----

This setup utility will guide you through the basic configuration
the system. Setup configures only enough connectivity for managem
of the system.

Please register Cisco Nexus7000 Family devices promptly with your

supplier. Failure to register may affect response times for initi
service calls. Nexus7000 devices must be registered to receive
entitled support services.

Press Enter at anytime to skip a dialog. Use ctrl-c at anytime

to skip the remaining dialogs.

Would you like to enter the basic configuration dialog (yes/no):

Create another login account (yes/no) [n]: n

Configure read-only SNMP community string (yes/no) [n]: n
Configure read-write SNMP community string (yes/no) [n]: n
Enter the switch name : yinyVdc

Continue with Out-of-band (mgmt0) management configuration? (ye

Mgmt0 IPv4 address : 4.4.4.4
Mgmt0 IPv4 netmask : 255.255.255.0
Configure the default gateway? (yes/no) [y]: y
IPv4 address of the default gateway : 4.4.4.1
Configure advanced IP options? (yes/no) [n]: n
Enable the telnet service? (yes/no) [n]: n
Enable the ssh service? (yes/no) [y]: y
Type of ssh key you would like to generate (dsa/rsa) [rsa]:

12 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

Number of rsa key bits <1024-2048> [1024]:

Configure default interface layer (L3/L2) [L3]: L3
Configure default switchport interface state (shut/noshut) [shu

The following configuration will be applied:

password strength-check
switchname tinyVdc
vrf context management
ip route 0.0.0.0/0 4.4.4.1
exit
no feature telnet
ssh key rsa 1024 force
feature ssh
no system default switchport
system default switchport shutdown
interface mgmt0
ip address 4.4.4.4 255.255.255.0
no shutdown

Would you like to edit the configuration? (yes/no) [n]: n

Use this configuration and save it? (yes/no) [y]: y

[########################################] 100%
Copy complete.

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac
Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.
The copyrights to certain works contained in this software are
owned by other third parties and used and distributed under
license. Certain components of this software are licensed under
the GNU General Public License (GPL) version 2.0 or the GNU
Lesser General Public License (LGPL) Version 2.1. A copy of each
such license is available at
http://www.opensource.org/licenses/gpl-2.0.php and
http://www.opensource.org/licenses/lgpl-2.1.php

tinyVdc#

13 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc# show interface brief

-----------------------------------------------------------------
Port VRF Status IP Address
-----------------------------------------------------------------
mgmt0 -- up 4.4.4.4

-----------------------------------------------------------------
Ethernet VLAN Type Mode Status Reason
t
Interface
#
-----------------------------------------------------------------
Eth4/5 -- eth routed down Administratively down
Eth4/6 -- eth routed down Administratively down
Eth4/7 -- eth routed down Administratively down
Eth4/8 -- eth routed down Administratively down

14 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

15 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config)# feature vpc

tinyVdc1(config)# vpc domain 12

16 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config-vpc-domain)# show vpc

Legend:
(*) - local vPC is down, forwarding via vPC peer-

vPC domain id : 12
Peer status : peer link not configured
vPC keep-alive status : Disabled
Configuration consistency status : failed
Per-vlan consistency status : failed
Configuration inconsistency reason: vPC peer-link does not exist
Type-2 consistency status : failed
Type-2 inconsistency reason : vPC peer-link does not exist
vPC role : none established
Number of vPCs configured : 0
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Disabled (due to peer configu
Auto-recovery status : Disabled

tinyVdc1(config)# vrf context vpc

tinyVdc1(config-vrf)# exit

17 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config)# interface ethernet 4/8

tinyVdc1(config-if)# vrf member vpc
tinyVdc1(config-if)# ip address 192.168.12.2
tinyVdc1(config-if)# no shutdown

tinyVdc1(config-if)# ping 192.168.12.1 vrf vpc

PING 192.168.12.1 (192.168.12.1): 56 data bytes

36 bytes from 192.168.12.2: Destination Host Unreachable
Request 0 timed out
64 bytes from 192.168.12.1: icmp_seq=1 ttl=254 time=0.86 ms
64 bytes from 192.168.12.1: icmp_seq=2 ttl=254 time=0.743 ms
64 bytes from 192.168.12.1: icmp_seq=3 ttl=254 time=0.755 ms
64 bytes from 192.168.12.1: icmp_seq=4 ttl=254 time=0.907 ms

--- 192.168.12.1 ping statistics ---

5 packets transmitted, 4 packets received, 20.00% packet loss
round-trip min/avg/max = 0.743/0.816/0.907 ms

tinyVdc1(config)# vpc domain 12

tinyVdc1(config-vpc-domain)# peer-keepalive destination 192.168.1

18 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config-vpc-domain)# show vpc peer-keepalive

vPC keep-alive status : peer is alive

--Peer is alive for : (107) seconds, (217) msec
--Send status : Success
--Last send at : 2013.07.30 09:43:36 724 ms
--Sent on interface : Eth4/8
--Receive status : Success
--Last receive at : 2013.07.30 09:43:36 646 ms
--Received on interface : Eth4/8
--Last update from peer : (0) seconds, (817) msec

vPC Keep-alive parameters

--Destination : 192.168.12.1
--Keepalive interval : 1000 msec
--Keepalive timeout : 5 seconds
--Keepalive hold timeout : 3 seconds
--Keepalive vrf : vpc
--Keepalive udp port : 3200
--Keepalive tos : 192

tinyVdc1(config)# interface 4/7

tinyVdc1(config-if)# switchport
tinyVdc1(config-if)# switchport mode trunk
tinyVdc1(config-if)# channel-group 12 mode on

19 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config)# interface po 12
tinyVdc1(config-if)# vpc peer-link

Please note that spanning tree port type is changed to "network"

This will enable spanning tree Bridge Assurance on vPC peer-link
(which is enabled by default) is not disabled.

tinyVdc1(config-if)# exit

tinyVdc1(config)# show vpc consistency-parameters global

Legend:
Type 1 : vPC will be suspended in case of mismatch

Name Type Local Value Peer Val

------------- ---- ---------------------- --------
STP Mode 1 Rapid-PVST -
STP Disabled 1 None -
STP MST Region Name 1 "" -
STP MST Region Revision 1 0 -
STP MST Region Instance to 1 -
VLAN Mapping
STP Loopguard 1 Disabled -
STP Bridge Assurance 1 Enabled -
STP Port Type, Edge 1 Normal, Disabled, -
BPDUFilter, Edge BPDUGuard Disabled
STP MST Simulate PVST 1 Enabled -
Allowed VLANs - 1 -
Local suspended VLANs - 1 -

20 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config)# show vpc consistency-parameters global

Legend:
Type 1 : vPC will be suspended in case of mismatch

Name Type Local Value Peer Val

------------- ---- ---------------------- --------
STP Mode 1 Rapid-PVST Rapid-PV
STP Disabled 1 None None
STP MST Region Name 1 "" ""
STP MST Region Revision 1 0 0
STP MST Region Instance to 1
VLAN Mapping
STP Loopguard 1 Disabled Disabled
STP Bridge Assurance 1 Enabled Enabled
STP Port Type, Edge 1 Normal, Disabled, Normal,
BPDUFilter, Edge BPDUGuard Disabled Disabled
STP MST Simulate PVST 1 Enabled Enabled
Allowed VLANs - 1 1
Local suspended VLANs - - -

21 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config)# show vpc

Legend:
(*) - local vPC is down, forwarding via vPC peer-

vPC domain id : 12
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 inconsistency reason : Consistency Check Not Perform
vPC role : secondary
Number of vPCs configured : 0
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Disabled

tinyVdc1(config)# vlan 10,20

tinyVdc1(config-vlan)# exit
tinyVdc1(config-vlan)# interface vlan 10
tinyVdc1(config-if)# ip address 10.0.10.1/24
tinyVdc1(config-if)# no shutdown
tinyVdc1(config-if)# interface vlan 20
tinyVdc1(config-if)# ip address 10.0.20.1/24
tinyVdc1(config-if)# no shutdown

22 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

Switch1(config)# vlan 10,20

Switch1(config-vlan)# exit
Switch1(config)# interface vlan 10
Switch1(config-if)# ip address 10.0.10.3 255.255.255.0
Switch1(config)# no shutdown
Switch1(config-vlan)# interface vlan 20
Switch1(config-if)# ip address 10.0.20.3 255.255.255.0
Switch1(config)# no shutdown

tinyVdc1(config)# interface ethernet 4/5

tinyVdc1(config-if)# switchport
tinyVdc1(config-if)# switchport mode trunk
tinyVdc1(config-if)# channel-group 2
tinyVdc1(config-if)# exit
tinyVdc1(config-if)# interface port-channel 2
tinyVdc1(config-if)# vpc 2

Switch1(config)# interface GigabitEthernet1/0/1

Switch1(config-if)# channel-group 2
Switch1(config-if)# interface GigabitEthernet1/0/2
Switch1(config-if)# channel-group 2
Switch1(config-if)# interface Port-channel 2
Switch1(config-if)# switchport trunk encapsulation dot1q
Switch1(config-if)# switchport mode trunk

23 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

tinyVdc1(config-if)# show vpc

Legend:
(*) - local vPC is down, forwarding via vPC peer-

vPC domain id : 12
Peer status : peer adjacency formed ok
vPC keep-alive status : peer is alive
Configuration consistency status : success
Per-vlan consistency status : success
Type-2 consistency status : success
vPC role : secondary
Number of vPCs configured : 2
Peer Gateway : Disabled
Dual-active excluded VLANs : -
Graceful Consistency Check : Enabled
Auto-recovery status : Disabled

vPC Peer-link status

-----------------------------------------------------------------
id Port Status Active vlans
-- ---- ------ ----------------------------------------------
1 Po12 up 1,10,20

vPC status
-----------------------------------------------------------------
id Port Status Consistency Reason Active
-- ---- ------ ----------- ------ -------
2 Po2 up success success 1,10,20

24 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

25 sur 28 26/05/2021 à 13:35

Nexus 7k – Getting Started Examples – Part1 (basics, VDC and vPC) ... https://networkgeekstuff.com/networking/nexus-getting-started-exampl...

26 sur 28 26/05/2021 à 13:35