Scribd
Upload
184 views

Manual Rovac Mini

The Ro-Vac Mini vacuum system consists of two main components: a vacuum unit and a hopper with vacuum head. The vacuum unit contains a vacuum pump powered by a diesel engine. It measures approximately 1050 x 700 x 740 mm. The hopper connects to the vacuum head and holds material before it is sucked into the vacuum unit. An instruction manual provides details on operating and maintaining the system safely.

Uploaded by

alvaro yepes oviedo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
184 views

Manual Rovac Mini

The Ro-Vac Mini vacuum system consists of two main components: a vacuum unit and a hopper with vacuum head. The vacuum unit contains a vacuum pump powered by a diesel engine. It measures approximately 1050 x 700 x 740 mm. The hopper connects to the vacuum head and holds material before it is sucked into the vacuum unit. An instruction manual provides details on operating and maintaining the system safely.

Uploaded by

alvaro yepes oviedo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

RO-VAC MINI

VACUUM UNIT SYSTEM

OPERATION & MAINTENANCE


HANDBOOK

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
www.desmi.com Revision July 2, 2015
Contents
1 Main Components .................................................................................................................... 3
1.1 Ro-Vac Mini Vacuum Unit ................................................................................................. 3
1.1.1 Dimensions ................................................................................................................ 3
1.2 Hopper with Vacuum Head ............................................................................................... 4
1.2.1 Dimensions: ............................................................................................................... 4
2 Materials and Construction - Vacuum Unit ............................................................................... 5
2.1 Vacuum Unit ..................................................................................................................... 5
2.2 Diesel Engine ................................................................................................................... 5
3 Materials and Construction – Hopper with Vacuum Head ........................................................ 6
3.1 Hopper .............................................................................................................................. 6
3.2 Vacuum Head ................................................................................................................... 6
4 Use of the System.................................................................................................................... 7
5 Attachments ............................................................................................................................. 8
5.1 EC DECLARATION OF CONFORMITY ............................................................................ 8
5.2 General Information and Safety Precaution ...................................................................... 8
5.3 Description of Signs .......................................................................................................... 8
5.4 HATZ DIESEL ENGINE – Instruction Book ....................................................................... 8
5.5 HATZ DIESEL ENGINE - Spare Parts .............................................................................. 8
5.6 HATZ SERVICE................................................................................................................ 8
5.7 Vacuum Pump Instruction Manual .................................................................................... 8

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
2
www.desmi.com
1 Main Components
The Ro-Vac Mini system consists of two main components:

- The Ro-Vac Mini vacuum unit


- The hopper with vacuum head

1.1 Ro-Vac Mini Vacuum Unit

1.1.1 Dimensions
L x W x H: Approx.1050 x 700 x 740 mm
Volume: Approx. 0.51 m3
Weight: Approx. 123 kg

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
3
www.desmi.com
1.2 Hopper with Vacuum Head

1.2.1 Dimensions:

Hopper* Vacuum head* Assembled*

L x W x H approx (mm) :Ø 590 x 780 950 x 720 x 550 950 x 720 x 1090

Volume approx. (m3) :0.21 0.34 0.67

Weight approx (kg) :21 22 43

* Incl. couplings

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
4
www.desmi.com
2 Materials and Construction - Vacuum Unit

The Ro-Vac Mini is constructed as a tubular bag trolley in aluminium with two wheels and two
handles. The frame is resting on two runners, when left in horizontal position, and can be carried
by two people.

2.1 Vacuum Unit


The vacuum unit has a Battioni Pagani vacuum pump model MEC 1600/P with a capacity of 1980
lpm and a vacuum of – 0.89 bar @ 1500 rpm. The pump is equipped with a 0.7 l oil lubrication tank
for drip lubrication of the pump vanes. The drip lubrication system is preset at the factory.

The pump can be changed from suction through neutral into pressure by a handle on top of the
pump.

For further details see Vacuum Pump Instruction Manual, which lie in parallel to this manual.

The pump is V-belt driven, from a diesel engine and is equipped with a siphon in order to prevent
accidental suction of any liquids direct into the vacuum pump.

The siphon is equipped with a 2” female Kamlok coupling.

2.2 Diesel Engine


The diesel engine is a Hatz 1B30 with el-start as well as recoil start. For diesel engine details see
Hatz instruction manual hindmost in this book.

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
5
www.desmi.com
3 Materials and Construction – Hopper with Vacuum Head

3.1 Hopper
The hopper is made from aluminium and is suitable for a standard vacuum head, which also fits
standard barrels. The hopper is designed as a funnel at the bottom. At the bottom of the funnel is
fitted a 2” ball valve with a 2” male Kamlok coupling, allowing suction of liquids by the pump unit. At
the top of the funnel is placed a basket of stainless steel mesh, which separates bigger items
which cannot be pumped.

3.2 Vacuum Head


The vacuum head has two Kamlok couplings, a 2” female for suction of air with a built-in fine wire
mesh to avoid foreign items entering the vacuum pump. The second Kamlok coupling is a 3” male
for suction through the lance of the medium to be removed like oil, oily water and oiled objects of
smaller size, which can pass the lance.

On top of the vacuum head is placed a vacuum meter, a spring loaded standard vacuum relief
valve and a second vacuum relief valve, which is released by a float inside the hopper. This last
valve is meant to release the vacuum in case the pump is not removing the recovered medium as
fast as it enters the hopper. That simply prevents the hopper from overfilling.

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
6
www.desmi.com
4 Use of the System

The vacuum unit and pump unit have to be placed at level ground next to the hopper.

Connect the vacuum unit to the vacuum head by means of the 5 m suction hose which has a 2”
female coupling at one end.

Connect the (4 x 10 m) hoses with a 2” male coupling to the other coupling on the vacuum head and,
if available, the suction lance.

The pump unit, if available, has to be connected to the bottom of the hopper. For the outlet from the
pump use a lay flat hose to discharge collected medium.

The vacuum pump can now be started after checking oils on vacuum pump and engine. It is
advisable not to run the pump unit dry for a long time.

Suction of medium can take place as long as the release float on the vacuum head is not activated.
Therefore in order to avoid the float to be activated, the ball valve on the hopper should be opened
and the pump unit started.

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
7
www.desmi.com
5 Attachments

5.1 EC DECLARATION OF CONFORMITY

5.2 General Information and Safety Precaution

5.3 Description of Signs

5.4 HATZ DIESEL ENGINE – Instruction Book

5.5 HATZ DIESEL ENGINE - Spare Parts

5.6 HATZ SERVICE

5.7 Vacuum Pump Instruction Manual


Which lie in parallel to this manual.

DESMI RO-CLEAN A/S


Hestehaven 61
5260 Odense S – Denmark
Tel.: +45 65 48 16 10
Fax +45 65 48 16 15
8
www.desmi.com

You might also like