P135/P150E

www.FGWilson.com

Output Ratings

Generating Set Model Prime* Standby*

380-415V,50Hz 135.0 kVA 150.0 kVA

108.0 kW 120.0 kW

480V, 60 Hz 150.0 kVA 165.0 kVA

120.0 kW 132.0 kW

* Refer to ratings definitions on page 4.

Ratings at 0.8 power factor.

Technical Data
Engine Make & Model: Perkins 1006TAG

Alternator Model: LL3014F

Base Frame Type: Heavy Duty Fabricated Steel

Circuit Breaker Type: 3 Pole MCCB

Frequency: 50 Hz 60 Hz

Engine Speed: RPM 1500 1800

Fuel Tank Capacity: litres (US gal) 290 (76.6)

Fuel Consumption: Prime l/hr (US gal/hr) 31.2 (8.2) 38.2 (10.1)

Fuel Consumption: Standby l/hr (US gal/hr) 34.4 (9.1) 41.5 (11.0)

FG Wilson has manufacturing facilities in the following

locations:
Northern Ireland · Brazil · China · India · USA
With headquarters in Northern Ireland, FG Wilson operates through a Global
Dealer Network. To contact your local Sales Office please visit the FG Wilson
website at www.FGWilson.com
P135 / P150E

Engine Technical Data

Physical Data Air System 50 Hz 60 Hz

Manufacturer: Perkins Air Filter Type: Replaceable Element

Model: 1006TAG Combustion Air Flow:
No. of Cylinders/Alignment: 6 / In Line m³/min (cfm) -Standby: 9.8 (346) 13.2 (466)
Cycle: 4 Stroke -Prime: 9.2 (325) 12.7 (448)
Induction: Turbocharged Air To Air Max. Combustion Air Intake
Charge Cooled Restriction: kPa (in H2O) 5.0 (20.1) 5.0 (20.1)

Cooling Method: Radiator Cooling Air Flow:

Water
Governing Type: Electronic m³/min (cfm) 192.0 (6780) 244.0 (8617)
Governing Class: ISO 8528 G2 External Restriction to
Compression Ratio: 17.0:1 Cooling Air Flow: Pa (in H2O) 125 (0.5) 125 (0.5)
Displacement: l (cu.in) 6.0 (365.5)
Bore/Stroke: mm (in) 100.0 (3.9)/127.0 (5.0) Cooling System 50 Hz 60 Hz
Moment of Inertia: kg m² (lb. in²) 1.61 (5502)
Cooling System Capacity:
Engine Electrical System:
l (US gal) 37.2 (9.8) 37.2 (9.8)
-Voltage/Ground: 12/Negative
Water Pump Type: Centrifugal
-Battery Charger Amps: 55
Heat Rejected to Water &
Weight: kg (lb) - Dry: 586 (1292)
Lube Oil: kW (Btu/min)
- Wet: 630 (1389)
-Standby: 72.9 (4146) 82.5 (4692)
Performance 50 Hz 60 Hz -Prime: 66.4 (3776) 70.1 (3987)
Heat Radiation to Room:
Engine Speed: RPM 1500 1800
kW (Btu/min) -Standby: 39.1 (2224) 50.9 (2895)
Gross Engine Power: kW (hp)
-Prime: 25.3 (1439) 31.2 (1774)
-Standby: 145.8 (196.0) 163.5 (219.0) Radiator Fan Load: kW (hp) 4.5 (6.0) 8.0 (10.7)
-Prime: 134.6 (181.0) 150.0 (201.0)
Cooling system designed to operate in ambient conditions up to 50°C (122°F).
BMEP: kPa (psi)
Contact your local FG Wilson dealer for power ratings at specific site conditions.
-Standby: 1949.0 (282.7) 1822.0 (264.2)
-Prime: 1800.0 (261.0) 1671.0 (242.3)
Lubrication System
Regenerative Power: kW 12.6 16.2
Oil Filter Type: Spin-On, Full Flow
Total Oil Capacity l (US gal): 19.0 (5.0)

Fuel System Oil Pan l (US gal): 16.0 (4.2)

Oil Type: AP1CD 15W-40
Fuel Filter Type: Replaceable Element Cooling Method: Water
Recommended Fuel: Class A2 Diesel
Fuel Consumption: l/hr (US gal/hr)
Exhaust System 50 Hz 60 Hz
110% 100% 75% 50%
Load Load Load Load Silencer Type: Level 1
Prime Silencer Model & Qty: SD100 (1)
50 Hz Pressure Drop Across
34.4 (9.1) 31.2 (8.2) 24.2 (6.4) 17.4 (4.6)
60 Hz Silencer System: kPa (in Hg) 4.00 (1.181) 4.00 (1.181)
41.5 (11.0) 38.2 (10.1) 30.0 (7.9) 21.7 (5.7)
Silencer Noise Reduction

Standby Level: dB 12 12
Max. Allowable Back
50 Hz 34.4 (9.1) 26.5 (7.0) 18.9 (5.0)
Pressure: kPa (in. Hg) 6.0 (1.8) 6.0 (1.8)
60 Hz 41.5 (11.0) 32.5 (8.6) 23.4 (6.2)
Exhaust Gas Flow:
(based on diesel fuel with a specific gravity of 0.85 and conforming to m³/min (cfm) -Standby: 25.7 (908) 31.4 (1109)
BS2869, Class A2) -Prime: 24.0 (848) 29.8 (1051)
Exhaust Gas Temperature: °C (°F)
-Standby: 585 (1085) 551 (1024)
-Prime: 571 (1060) 540 (1004)

2
 P135 / P150E

Alternator Performance Data

50 Hz 60 Hz
Data Item 415/240V 400/230V 380/220V 220/127V 480/277V 380/220V 240/120V 230/115V 440/254V
230/115V 220/110V 240/139V 220/110V 208/120V 220/127V
200/115V

Motor Starting
Capability* kVA 329 309 283 362 360 241 283 264 311

Short Circuit
Capacity** % 300 300 300 300 300 300 300 300 300

Reactances:
Per Unit

Xd 2.640 2.850 3.150 2.180 2.640 4.200 3.510 3.790 3.140

X'd 0.090 0.100 0.110 0.080 0.090 0.150 0.120 0.130 0.110

X''d 0.055 0.059 0.065 0.045 0.055 0.087 0.073 0.079 0.065

Reactances shown are applicable to prime ratings

* Based on 30% voltage dip.
** With optional Permanent Magnet generator or AREP excitation.

Alternator Technical Data

Physical Data Operating Data

Manufacturer: FG WILSON Overspeed: RPM 2250

Model: LL3014F Voltage Regulation (steady state) (%): +/- 0.5

No. of Bearings: 1 Wave Form NEMA = TIF: 50

Insulation Class: H Wave Form IEC = THF: 2.0%

Winding Pitch Code: 2/3 - 6 Total Harmonic Content LL/LN: 4.0%

Supression is in line with European Standard

Wires: 12 Radio Interference: EN61000-6

Ingress Protection Rating: IP23 Radiant Heat: kW (Btu/min)

Excitation System: SHUNT -50 Hz: 10.0 (569)

AVR Model: R250 -60 Hz: 10.5 (597)

3
P135 / P150E

Technical Data
3 Phase Ratings and Performance at 50 Hz, 1500 RPM 3 Phase Ratings and Performance at 60 Hz, 1800 RPM

Voltage Prime Standby Voltage Prime Standby

kVA kW kVA kW kVA kW kVA kW

415/240V 135.0 108.0 150.0 120.0 480/277V 150.0 120.0 165.0 132.0
400/230V 135.0 108.0 150.0 120.0 220/127V 150.0 120.0 165.0 132.0
380/220V 135.0 108.0 150.0 120.0 380/220V 150.0 120.0 165.0 132.0
230/115V 135.0 108.0 150.0 120.0 240/120V 150.0 120.0 165.0 132.0
220/127V 125.0 100.0 138.0 110.4 230/115V 150.0 120.0 165.0 132.0
220/110V 135.0 108.0 150.0 120.0 440/254V 150.0 120.0 165.0 132.0
200/115V 135.0 108.0 150.0 120.0 220/110V 150.0 120.0 165.0 132.0
208/120V 150.0 120.0 165.0 132.0
240/139V 150.0 120.0 165.0 132.0

Definitions
Standby Rating Prime Rating Standard Reference Conditions
These ratings are applicable for supplying These ratings are applicable for supplying Note: Standard reference conditions 25°C
continuous electrical power (at variable load) continuous electrical power (at variable load) (77°F) Air Inlet Temp, 100m (328ft) A.S.L.
in the event of a utility power failure. No in lieu of commercially purchased power. 30% relative humidity. Fuel consumption data
overload is permitted on these ratings. The There is no limitation to the annual hours of at full load with diesel fuel with specific gravity
alternator on this model is peak continuous operation and this model can supply 10% of 0.85 and conforming to BS2869: 1998,
rated (as defined in ISO 8528-3). overload power for 1 hour in 12 hours. Class A2.

Weights and Dimensions

Weights: kg (lb) Dimensions: mm (in)

Net (+ lube oil) 1460 (3219) Length 2675 (105.3)

Wet (+ lube oil & coolant) 1480 (3263) Width 900 (35.4)
Fuel, lube oil & coolant 1725 (3803) Height 1460 (57.5)

General Data
Documents Generating Set Standards Warranty
A full set of operation and maintenance The equipment meets the following standards: All equipment carries full manufacturer's
manuals and circuit wiring diagrams. BS5000, ISO 8528, ISO 3046, IEC 60034, warranty. Extended warranty terms available.
NEMA MG-1.22. For details on warranty cover please contact
your local dealer, or visit our website:
FG Wilson is a fully accredited ISO 9001 www.FGWilson.com
company.

In line with our policy of continuous product development, we reserve the right to change specification without notice. P135 / P150E/4PP/0209/GB