Morpholio Quick Tips

TracePro
Support > Video Tutorials > Community Blog >
Morpholio Quick Tips
TracePro
Select any chapter below to begin.
01: Hand Gestures 12: Perspective Tools
02: Apple Pencil 13: Drawing Power Tools
03: Start a New Drawing 14: Magic Lasso
04: Setting The Scale 15: Stencils
05: Project Settings 16: Export
06: App Settings 17: Your Projects & Folders
07: Setting Your Pens 18: Super PDF Manager
08: Custom Color Palettes 19: Maps
09: Layer Controls 20: AR Perspective Finder
10: Smart Fill 21: Drag’n’Fly 3D Viewer
11: Smart Hatch 22: AR Sketch Walk
01: Hand Gestures

Basic Hand
Gestures
How to video >
Enjoy these intuitive gestures to
One Finger Tap One Finger Pan One Finger draw digitally with ease.
Tool Selection Drag one finger to Press and Hold
pan over drawing Change Layer Order
Change Project Order

Two Finger Pinch Two Finger Drag

Zoom + Scale Images Pan, Zoom and
Rotate View Back to Top
01: Hand Gestures

x2 Advanced
Hand
Gestures
One Finger Double Tap Two Finger Tap Three Finger Tap Work like a pro with these
Rotate Ruler/Triangle 90° Undo Last Action Redo Last Action advanced gestures to enhance
Return Protractor to Circle and simplify your drawing
experience!

Three Finger Drag Four Finger Tap

Move sheet around Hide/Show Toolbars
the canvas Back to Top
02: Apple Pencil

Pencil Tips
How to video >

Want to get the most of your

Apple Pencil in Trace? Rome
Prize winner, Javier Galindo,
is going to show you a few
features that will make your Trace
drawings sing.

Pressure
1 Want a line to be bolder
or darker? Simply press
down and watch the
lightness of the line
change. Make your line
look heavy or faint. Perfect
for expressing depth in
your drawing.

Back to Top
02: Apple Pencil
Tilt
2 Want to fill or shade?
Simply “Tilt” your
Apple Pencil to allow
your watercolor brush,
graphite pencil, charcoal
or chisel marker to be
spread wide or bleed
deep. It will feel just like
a real pencil on its side.
 
HINT: Lighten opacity
slider in pen tool bar for
soft shading.

Back to Top
02: Apple Pencil
Azimuth
3 Want to see something
really cool? Use the
chisel marker and notice
the direction of the line
adjust with the marker
as you rotate it. Can you
get more real than this?

Back to Top
02: Apple Pencil
Consistency
4 Need a mechanical line
where the pen maintains
perfect width and
color? Simply select the
technical pen and you
will have the exact line
you need no matter how
the pencil moves. To
change thickness simply
change pen sizes.

Back to Top
02: Apple Pencil
Switch
5 Using multiple stencils?
Want to switch brushes?
You can use the double
tap feature of Apple
Pencil 2 to flip through a
ton of different features!
Just toggle on the
double tap feature in
your Device Settings
and then turn on Custom
Double-Tap Behavior in
your Trace settings.

Back to Top
03: Start a New Drawing

Projects Page
Interface
How to video >
Blank
Start with a completely
blank sheet of trace.
Custom
Start any drawing to a set
scale and paper size.
Library
Trace over any background
PDF, photo or image.
Multipage PDF
Start with a drawing set or
document with up to 100 pages.
Maps
Start with an automatically-
scaled satellite image or map.
Back to Top
03: Start a New Drawing

AR Camera
Start with an AR
perspective grid overlaid
on a photo.

Note: AR Camera only

available on 2018 iOS
devices and newer.

Back to Top
03: Start a New Drawing

3D Model
Start a project by
creating perspective
views using a 3D model!

Note: Learn more about

3D model integration in
Drag’n’Fly Section.

Back to Top
03: Start a New Drawing

Folders
Create a new folder.

You can organize

Projects by placing them
inside folders. Folders
can also be placed
inside folders.

Note: Learn more about

Folders in Your Projects
Section.

Back to Top
04: Setting The Scale

Setting the
Scale
How to video >
Want to set a drawing “to scale” in
seconds? Meet your new favorite
button. Below is a quick “How
To” guide to register the scale
& units for any PDF, sketch or
background image. Drawing by
WORKac.

The Scale Button

1 With a single tap,
you can take any
background and turn it
into a scaled drawing.

Back to Top
04: Setting The Scale
Register Units
2 Using the cross-
hairs, set any known
dimension.

Tip: Zoom in for more

accurate placement.

Back to Top
04: Setting The Scale
Ta-dah!
3 You did it :) All your
tools are now magically
calibrated to the drawing
scale you set.

Note: For future scale

adjustments go to
“Project Settings” by
tapping the wrench
button.

Back to Top
04: Setting The Scale
Making Drawing Sets
5 You can export your
drawings, markups
or projects at multiple
scales.

Hint: After selecting the

“Print Scale”, tap the
preview to adjust your
drawing’s position on
the page.

Back to Top
05: Project Settings

Meet the
“Wrench”
How to video >
Want more control of your
drawings and the ability to record
your magic? Meet the “Wrench”!
Below is a quick “How To” guide
for your Project Settings. Drawing
by master illustrator Jim Keen.
Scale
1 Set the scale of your
drawing and change
units to metric or
imperial.

Learn more in the

Setting The Scale
Section.

Back to Top
05: Project Settings
Video
2 Want to make an
Instagram video?
Record a time-lapse
video of your drawing
progress, replay it and
export it to share to
cloud storage or on
social media!

Back to Top
05: Project Settings
Preferences
3 Pencil Only Drawing:
Adjust this for all projects in
the main Trace Settings. No
more accidental palm and
finger lines!
Layer Drop Shadows: Turn
drop shadows on or off in
Project view.
Rotation Snap: Toggle 90
and 45 degree snaps on or
off for tool and layer rotation.
Reset Palettes: Restore
defaults for all palettes.

Back to Top
05: Project Settings
Help
4 We got your back! Find
user guides, how to
videos and more here...
User Guide: Quick Tips for
Getting into Trace
Quick Button Guide: Learn
the buttons
How To Videos: Video Guides
for navigating Trace
Support & Help: A search
tool with all the resources to
answer your questions!
Request a Feature: Suggest
ways to improve Trace
Report a Problem: Need more
help? Email us!
Community Blog: Discover tips,
tricks, and awesome examples!
Restore Purchases: Activate
your Pro subscription!

Back to Top
06: App Settings

App Settings
How to video >

App Settings Button

Subscription Status
View your subscription
tier and restore your
subscription.
Special Note: All
subscriptions are
supported solely by
Apple, not Morpholio.

Apple Pencil Settings

Turn on palm rejection through
Pencil Only Mode.
Pan your dawing without
zooming with One Finger Pan.
Turn on Trace custom double
tap options.

Back to Top
06: App Settings

Drawing Settings
Change your default units.

Set the default layer color.

Selecting “None” will use the last
layer color and opacity for new
layers.

Set Super Drawing Tools color

(Ruler, Triangle, and Protractor).

Toggle “Stack Layers” ON to add

layers that are the same size as
your base layer.

Toggle “Undo/Redo Gesture” ON

to activate two- and three-finger
tap to “undo” and “redo”.

“Left Hand Mode” switches the

Brush Toolbar with the Layer
Toolbar for left-handed users.

“Zoom Rotation Lock” locks the

canvas from rotating when you
zoom or add new layers.

Back to Top
06: App Settings

Title Block Settings

Edit your title block
options.

Account Settings
Edit your profile name, photo, personal
discription, and website.

Log out to switch Morpholio accounts.

Change your Morpholio account

password, email or get help!

Back to Top
06: App Settings

App Support
User Guide: Quick Tips for
Getting into Trace
How To Videos: Video
Tutorials to learn Trace
Support & Help: A search
tool with all the resources to
answer your questions!
Request a Feature:
Suggest ways to improve
Trace
Report a Problem: Need
more help? Contact us!
Community Blog: Read
the latest Morpholio news!
Restore Purchases:
Reactivate your subscription

Back to Top
07: Setting Your Pens

Pen Toolbar
Interface
How to Video >
Drawing by Rodrigo Cavazos.
Your Set of 7 Pens
Each user can create
their own set of pens.
Select a variety of brush
and pen types or keep
your pen set with one
pen with a variety of pen
widths or colors. All pens
maintain their properties
between drawings and
can be changed at any
time.
Eraser
The eraser is a brush!
Set the size and opacity
for precise erasing.
Back to Top
07: Setting Your Pens

Set Line Size and Type

Each pen can also have
its own size and line
type. Create your own
set of technical pen
sizes to emphasize line
weight in your drawings.

Select Color and

Opacity
Each pen can have its
own color and specific
opacity. Use the opacity
slider to change the
intensity of the line.

Back to Top
07: Setting Your Pens
ScalePen™
As you zoom in and
out the pen widths will
change automatically to
show the optimal pen
size for your drawing.

Note: your selected

pen width will remain
highlighted.

Back to Top
07: Setting Your Pens

Roller Brush
How to video >

Roller Brush
You can use the Roller
Brush to fill regions,
color diagrams, overlay
shadows, and much
more.
Special Note: When the
Roller Brush is selected,
you will not have access
to the top toolbar tools.
Back to Top
08: Custom Color Palettes

Color Palette
Interface
How to video >
Color Palettes
Selected a curated color
palette or create your own
custom color palette.

Back to Top
08: Custom Color Palettes

New Custom Palette

Create a new custom
color palette.

Curated Color Palettes

Created by award winning
graphic designers at New
York’s MTWTF, the pre-
made color palettes are
designed to do the difficult
work of color pairing and
matching for you. The
colors are available in
various palettes which
include, landscape,
interiors, diagramming,
sustainability, lighting,
architecture and many
more.
Back to Top
08: Custom Color Palettes

Color Number Input

You can use RGB, HSV,
or Hex Color codes to
find colors.
Color Gradient
Pick a color by tapping
in the color gradient box.
Color Sliders
Drag the color sliders to
select a color.

Back to Top
08: Custom Color Palettes

Add Color
Once you select the
desired color, tap a
blank square to add it to
a palette.

Move and Delete Colors

Tap and Hold a color to
rearrange the order or
delete a color.

Back to Top
08: Custom Color Palettes

Color Dropper
You can find a color on
an inspirational drawing
or image.

Color Selector
After tapping the Color
Dropper, you can press
and drag along the
image to choose the
desired color.

Add Color
Tap a blank square to
add it to a color palette.

Back to Top
09: Layer Controls

Layer Toolbar
Interface
How to video >

Add a Layer of Trace

Frame detail drawings
with a new sheet to get
the best line resolution.
Add Image
Add images from
morpholioapps.com or
other cloud storage.
Add Text
Annotate your drawings.

On/Off
Tap to hide and show
layers.

Back to Top
09: Layer Controls

Zoom to Layer
Tap layer to zoom to that
layer.
Move Layers
Press and hold layers to
rearrange.
Delete Layers
Swipe layers to the left
to delete.

Back to Top
09: Layer Controls

Layer Actions
Tap options to:
-rename layer
-change paper opacity
-change drawing opacity
-change paper color
-change paper blending
-resize and reposition
-clear all content
-delete layer
-copy layer to clipboard
-duplicate layer
-lock layer movement
-mirror Layer
-toggle AR extrusion

Back to Top
09: Layer Controls

Set Active Layer

Double Tap any
layer to set it
as the “Active
Layer” to draw
on!

Double tap the

layer again to
deselect it.

Back to Top
09: Layer Controls

Merge Layers
COMING Coming soon,
SOON! you’ll be able
to combine two
layers into one.

Back to Top
09: Layer Controls

Copy Layer To Scale

COMING Copy a layer
SOON! without changing
the page’s size
coming soon!

Back to Top
10: Smart Fill

Smart Fill
Interface
How to video >
Smart Fill
Use Smart Fill to
calculate areas and fill
in color inside closed
regions.

Single and Multiple

Region Smart Fill
You can use Smart Fill
for single regions or
multiple regions.

Back to Top
10: Smart Fill

Tolerance
You can change the
tolerance of the selection
Fill
You can fill the selected
region with a solid color.
Select Color
You can select the color
you want to fill a region.
Area Marker
You can create a text
annotation to display
the area.
Area Selector
Tap and drag this cross-
hair to select a region.
Back to Top
10: Smart Fill

Live Update
The area calculation and
fill will live update as
new lines are drawn!

Back to Top
10: Smart Fill

Area Calculator
You can find the sum of
the area of all highlighted
regions. Tap the chart to
copy it!

Special Note: You can use

Apple’s Drag and Drop
feature to turn this data
into a spreadsheet by
dragging and dropping it
into Excel.

Back to Top
11: Smart Hatch

Smart Hatch
Interface
How to video >
Smart Hatch Library
Select any hatch option
to hatch the region.

Hint: Tap the red slash

to return to a solid fill.

Single and Multiple

Region Smart Hatch
You can use Smart
Hatch for single regions
or multiple regions.
Region Selector
Drag this target to select
a region to hatch.

Back to Top
11: Smart Hatch

Apply Hatch
Add hatch to selected region.
Apply Area Measurement
Add text to display the area.
Tolerance
Change the tolerance of
the selected region
Hatch Color
Change the color of the
hatch pattern
Hatch Opacity
Change the opacity of the
hatch pattern
Hatch Scale
Change the size/scale of
the hatch pattern
Invert Hatch
Inverse the hatch pattern
Back to Top
12: Perspective Tools

Perspective
Interface
How to video >

Perspective Tool
Use the perspective tool to
draw lines in one, two, or
three point perspective.

Back to Top
12: Perspective Tools

Perspective Type
Tap to toggle between
one, two, or three point
perspective.

Vanishing Points
Press & hold ,
then drag to move the
vanishing points.
Horizon Line
Press & hold, then drag
the horizon line to move.

Set Vanishing Points

Set and lock your
vanishing points and
perspective grid by
tapping the green check.

Back to Top
12: Perspective Tools

Perspective Guide
Press & hold , then
drag to move line location.

Back to Top
12: Perspective Tools
Change Perspective Type
You can change the
perspective type to
one, two, or three point
perspective.
Grid Lines
You can toggle the
visibility of the perspective
grid lines.
Perspective Guide
The guide helps you
locate where you want to
draw lines in perspective.
Perspective Assist
Use perspective assist
to automatically guide
your lines to and from a
vanishing point.
Hint: Turn these on and
off to test out different
ways to interact with the
perspective grid!
Back to Top
13: Drawing Power Tools

Super Ruler
Interface
How to video >
Super Ruler
Use the Super Ruler
to measure and draw
straight lines. Rotate 3
times to get an angle
less than 3°.
Note: you can rotate the
ruler 90º by tapping
or double tapping the
triangle.

Back to Top
13: Drawing Power Tools
Super Triangle Settings

Assisted Straight Lines

Toggle “Assist” on to draw
straight lines anywhere
on the drawing screen.
Snap Mode Toggle
When this is toggled on,
while drawing a stroke
with your Pencil, you
can tap the screen with
another finger to switch
between angle snap
mode and infinite angle
mode.
Angle Snap
Select 15, 30, 45, or 90
to set the angle of the
straight lines in relation
to the Super Ruler’s
angle. “Infinite” allows
you to draw straight
lines at any angle. Back to Top
13: Drawing Power Tools

New Features
More features coming
soon!
COMING
SOON!

Back to Top
13: Drawing Power Tools

Super
Triangle
Interface
How to video >
Super Triangle
Use the adjustable
triangle to draw straight
lines on all three sides.
Rotate 3 times to get an
angle less than 3°.
Note: you can rotate the
triangle 90º by tapping
or double tapping the
triangle.

Back to Top
13: Drawing Power Tools

Adjust Angle
Use the slider or tap the
angle icon to set your
triangle’s angle.

Back to Top
13: Drawing Power Tools
Super Triangle Settings

Triangle Snap Mode

Toggle “Assist” on
to draw straight
lines parallel and
perpendicular to
the triangle’s edges
anywhere.

Snap Mode Toggle

When this is toggled on,
while drawing a stroke
with your Pencil, you
can tap the screen with
another finger to switch
between triangle snap
mode and infinite angle
mode.

Back to Top
13: Drawing Power Tools

Protractor
Interface
How to video >

Super Protractor
Use the adjustable
protractor to draw circles
and arcs.

Note: you can set the

diameter or radius of the
protractor by tapping .

Center Point
Tap the middle of the
protractor to mark the
center of the circle.

Back to Top
13: Drawing Power Tools
Super Triangle Settings

Protractor Snap Mode

Turn on Assist to
draw perfect arcs and
circles concentrically
around the center of the
protractor. You can also
draw straight radial lines
from the center of the
protractor.

Back to Top
13: Drawing Power Tools

Ellipse Tool
Tap on the control points
to stretch the circle into
an ellipse.

Hint: You can also use

Assist with the ellipse to
draw concentric ellipses.

Double tap the tool to

return to circle mode.

Back to Top
14: Magic Lasso

Magic
Lasso
How to video >
Have you seen your newest
magic lasso feature? Want to
copy, mirror, flip or delete any
specific selection of a sketch?
Well, now you can! Below is a
quick “How To” guide to get you
started on this exciting new way
of working with your drawing.

Tap Magic Lasso Tool

1 When opening up
the magic lasso, your
interface will hide and
you can draw your
magic lasso around any
part of your sketch.
Back to Top
14: Magic Lasso
Which Layer will
2 Lasso?
You can only lasso one
layer at a time. If your
layers are stacked,
you will only be able to
lasso the top layer. In
this case, turn off layers
above it or move the
layer you want to the top
layer. If your layers are
spread out like sheets of
paper, the first layer you
touch to start your lasso
will determine what lines
you can select. You will
see a black indicator
around that sheet of
paper. Your selected
lines will be changed on
that layer only.

Back to Top
14: Magic Lasso
Draw Your Lasso
3 Make any lasso shape
around the specific
part of the sketch that
you want to select.
Everything inside of that
lasso will be selected.

Hint: Zoom in for better

selection.

Back to Top
14: Magic Lasso
The Magic Lasso Toolbar
4a Now you can duplicate,
move, scale, rotate,
mirror, or delete the
selected area of your
sketch! Remember to
tap outside the selection
area to confirm and
create the duplicate. If
you exit by tapping the
“Magic Lasso” icon, you
will loose the selection.

Hint: Make sure “Lock

Scale” button is red to
keep your drawing size
from changing!

Back to Top
14: Magic Lasso
Mirror
4b Reflect any selection
horizontally.

Back to Top
14: Magic Lasso
Flip
4c Reflect any selection
vertically.

Back to Top
14: Magic Lasso
Copy between Layers
4d Coming soon you’ll be
able to copy lines from
one layer to another!

COMING
SOON!

Back to Top
14: Magic Lasso
Return to Drawing
5 Tap the “Magic Lasso”
icon again to exit “Magic
Lasso Mode”. Congrats!
You’ve now transformed
your sketch!

Back to Top
14: Magic Lasso

Magic
Lasso
Interface
Magic Lasso
Tap Magic Lasso icon
to enter and exit Magic
Lasso Mode.

Note: Side toolbars will

disappear.

Selected Sheet
A black outline indicates
which sheet is active.

Back to Top
14: Magic Lasso

Mirror Horizontal

Mirror Vertical

Lock Size

Duplicate

Delete

Lasso Selection
Dashed-line rectangle
appears around selected
area.

Back to Top
15: Stencils

Stencil
Interface
How to video >
Stencil Tool
Tap stencil to use the
Stencil tool.
Stencil Libraries
Tap Stencil Settings to
see all the libraries of
pre-made stencils.
Position Stencil
Scale and adjust stencil
to desired location and
size.
Fill
Use multiple colors or
brushes to customize
your stencil effects.
Back to Top
15: Stencils

Add Custom Stencil

Tap “+” to open your
camera or photo library.

Delete Custom Stencil

After selecting a Custom
Stencil, pull down the
Stencils and then tap
Delete.

Back to Top
15: Stencils

Make the Stencil

Adjust contrast or invert
to get the exact detail
and stencil you want. 

Back to Top
15: Stencils

Mirror Horizontal

Mirror Vertical

Lock Position & Size

Lock Rotation

Invert Stencil

Fill

Back to Top
16: Export

Export
Interface
Export Drawing
Tap the export icon to
share your drawing.
Export Settings
Share your drawing as a
PDF, Image, PSD, or as an
editable .MorpholioTrace file.

You can also select the

quality of your export.

Special Note: If you are

working in a multi-page PDF,
you can export all of your
sheets as a single PDF in the
Super PDF Manager.
Back to Top
16: Export

Title/Page Number
Tap the title and page
number to edit.

Notes
Tap the notes to add a
text description.

Selected Export
Tap the Export toggle to
select layers to export.

Back to Top
16: Export

Page Size/Print Scale

Change the size and
scale of the exported
drawing.

Arrange Drawing
Tap the drawing to move
and layout on paper.
Tap outside the paper to
set the new location.

Back to Top
17: Your Projects & Folders

Share +
Back up Your
Trace Files
Did you know you can now share all
of your original Trace drawing files?
Want to send a drawing to your
team, AirDrop it onto your iPhone or
simply save it to your files? Below
is a quick “How To” guide to get
you started sharing and backing
up your work. Drawings by Mike
Morrissey, Tommy Sutanto, Jim
Keen, and Amin Zakaria.

Select Mode
1 From the Trace projects
page, tap “Select” to
enter into select mode.
Back to Top
17: Your Projects & Folders
Pick Your Projects
2 Select the projects that
you want to export or
share.

Hint: You can also

rename, duplicate, copy/
paste, group, or delete
projects while in select
mode!

Back to Top
17: Your Projects & Folders
Share Your Projects
3 Tap “Export” to AirDrop
to another device, save
to your cloud storage, or
email them out. When
you’re finished simply hit
“Done.” It’s that easy!

Note: Some email and

storage services may
only allow one file to be
shared at a time. Please
be sure to check all files
go through.

Back to Top
17: Your Projects & Folders

Project
Interface
Drawings by Rodrigo Cavazos.

Edit Title
Tap Select and then
tap title to rename your
projects. Tap “Done”
when finished.

Arrange Projects
Press and hold projects
to rearrange.

Back to Top
17: Your Projects & Folders

Add Folder
You can add new folders
to sort your projects into
organized categories.

Move Projects
Press and hold, then
drag projects to move
them into move them
into a folder.

Back to Top
17: Your Projects & Folders

Edit Projects
Tap “Select” to rename
or select projects to
duplicate, copy, paste,
export, group, or delete.

Back to Top
17: Your Projects & Folders

Exit Select Mode

Tap “Done” to close
project management.

Select Multiple Projects

Tap the circle to select
single or multiple
projects to manage.

Edit Projects
Cancel selection, duplicate,
copy, paste, export, group,
or delete projects.
Back to Top
17: Your Projects & Folders

Move Projects Back

Press and hold, then
drag project to “Back to
...” to move a project to
the outside folder.

Return to Outside Folder

Tap to return to the
outside folder.

Back to Top
18: Super PDF Manager

Super
PDF Manager
Interface
How to video >

Super PDF Manager

Tap icon to open Super
PDF Manager and view
all pages in your PDF
document.

Change View Mode

Toggle between single-
page scroll view and
mult-page grid view.

Back to Top
18: Super PDF Manager

Return to Drawing Mode

Tap to return to drawing
mode to continue editing
your PDF!

Select Active Sheet

Tap once on a sheet to set
it as your active project
(the yellow outline will
appear when your sheet is
selected).

After a sheet is selected,

tap again to open that
sheet in your drawing area.

Scroll through Sheets

In single-page scroll
mode, drag and up and
down to view or present
your PDF sheets.
Back to Top
18: Super PDF Manager

Edit Mode
Tap “Edit” to arrange,
add, duplicate, delete,
and export your sheets.

Select Sheets
Tap the circle to select
single or multiple sheets.

Selected Sheet Actions

Add new blank sheets
or duplicate, delete, or
export selected sheets.

Back to Top
18: Super PDF Manager

Export All
Export all pages in your PDF.

Export Options
Export your PDF set
at as a PDF, Image,
or export your whole
project as an editable
.MorpholioTrace file.

You can also select the

quality of your export.

Back to Top
19: Maps

Map
Interface
How to video >
Launch Map
Tap this icon to start a
Project with a Map.

Back to Top
19: Maps

Search Location
You can create
backgrounds from maps
of any location in the
world.

Map/Satellite
You can toggle between
map view and satellite
view.

Back to Top
19: Maps

Select View
Pinch to zoom and
rotate the map to
selected your desired
view. Tap the check
mark to make the map
your background.

Back to Top
19: Maps

Pre-Scaled
When you enter project
mode, the drawing is
already scaled and
ready to go!

Back to Top
20: AR Perspective Finder

AR Mode
Interface
How to video >
Launch AR Camera
Tap this icon to start a
Project with the
AR Camera

Back to Top
20: AR Perspective Finder

How to set a grid

Step 1: Move iPad to
register surface.

Step 2: After grid

appears, swipe your
finger to rotate and align
grid to camera view.

Step 3: Once aligned,

tap anywhere on screen
to lock the grid.

Step 4. Capture the

image by pressing the
camera button.

Back to Top
20: AR Perspective Finder

Orientation
You can adjust the
vanishing point of the
perspective grid.
Intensity
You can adjust the color
of the perspective grid.

Units
You can adjust the
number of grid lines.
Also you can choose
between imperial or
metric units.

Back to Top
21: Drag’n’Fly 3D Viewer

Drag’n’Fly
3D Viewer
Interface
How to video >
Launch Drag’n’Fly
3D Viewer
Tap this icon to start a Project
with the a 3D Model.

If you have trouble importing,

try:
1. Only export mesh objects.
2. Make sure your 3D model
is located in the positive XY
axis of your model space.
3. Make sure your model
units are feet or meters
ONLY.
Back to Top
21: Drag’n’Fly 3D Viewer

Camera Control Tips

Learn gestures to navigate
each camera type.
Camera Controls
Orbital
Tap: Focus on Point
Double Tap: Reset View
Pinch: Move Forward
1 Finger Drag: Rotate View
2 Finder Drag: Pan View

Classic
Tap: Focus on Point
Double Tap: Reset View
Pinch: Change Field of View
1 Finger Drag: Rotate View
2 Finder Drag: Pan View
3 Finger Drag: Move Forward

POV (Point of View)

Tap: Focus on Point
Double Tap: Reset View
Pinch: Move Forward
1 Finger Drag: Look Around
2 Finder Drag: Pan View

Back to Top
21: Drag’n’Fly 3D Viewer

Find Your View

Use the view labels to
view orthogonal and
perspective views of the
model.

Set Camera Type

View and navigate your
3D model with Orbital
control, Classic Apple
control, or POV control.
Learn more on the next
page.

Set Model Orientation

Rotate your 3D model to
the optimal orientation.
Select Your View
When you have found
your preferred view, tap
the green check.
Back to Top
21: Drag’n’Fly 3D Viewer

View Settings
Tap to set sun control
and camera field of view.

Set Sun Angle

Change the sun angle
and pitch to set your
shadows.

Set Camera Angle

Change your field of
view to set a human
view or or a more wide-
angle view.

Back to Top
21: Drag’n’Fly 3D Viewer

Make a Background Image

Tap Done to turn the 3D
view into a background
image to sketch over!

Back to Top
21: Drag’n’Fly 3D Viewer
3D View for You!
You will automatically
enter Perspective Mode
with the perspective
grid customized to
your view. Use colors,
brushes, and all the
tools to make an
amazing drawing!

Note: See the

Perspective Tools
Section for more tips!

3D Model Mode
Tap cube to return to
the 3D model to select
another view to use as
a drawing background.

Back to Top
21: Drag’n’Fly 3D Viewer

View Options
Swipe up on a view to rename
it, duplicate it, or delete it!

Export View
Save or share a PDF or
share an Image of the
selected view.
Back to Top
22: AR SketchWalk

AR
SketchWalk
Interface
How to video >
AR SketchWalk Mode
Tap this icon to
transform your drawing
into an AR Sketch Walk.

AR SketchWalk Target
Press and drag Target to
selection start location
for SketchWalk

View AR SketchWalk
Tap “View in AR” to
launch AR Sketch Walk
mode.
Back to Top
22: AR SketchWalk

Disable AR Extrusion
Control which layers
are extruded in Layer
Settings.

Back to Top
22: AR SketchWalk

Anchor the Drawing

Move your device back and
forth to register a surface.
When the grid appears,
rotate as needed and tap
anywhere on the screen to
set the drawing.

Back to Top
22: AR SketchWalk

Backdrop
Toggle the camera view
on or off.

Drawing Orientation
Toggle between plan
and elevation orientation
of your drawing.

Capture a View
Save an image of the
Sketch Walk to your
Photos.
Extrude Lines in 3D
Extrude sketch lines by
adjusting the 3D slider.

Tip: Control which

layers are extruded in
Layer Settings.
Back to Top
22: AR SketchWalk

Host an AR SketchWalk
Toggle the “public” button. Your
sketch walk is now discoverable
to anyone nearby using
Morpholio Trace.

Back to Top
22: AR SketchWalk

Host an AR SketchWalk
Toggle the “public” button. Your
sketch walk is now discoverable
to anyone nearby using
Morpholio Trace.

Join an AR SketchWalk
Press the “Join AR” button
in the Projects screen. This
will automatically look for any
nearby “public” sketch walks.
Scan the same surroundings
that your host has scanned and
the project should appear.
Your locations and views will
stay synchronized as your
explore in the same space.

Back to Top
Instagram > YouTube > Pinterest >

Back to Top
Morpholio Quick Tips
TracePro
THANK YOU.

Back to Top