Scribd
Upload
126 views2 pages

Technical Data Sheet 2021-09-09 05 - 27 - 06

Uploaded by

Andersson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
126 views2 pages

Technical Data Sheet 2021-09-09 05 - 27 - 06

Uploaded by

Andersson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

HF1820
Linear Low Density Polyethylene

Product Description
The HF1820 resin is a pelletized linear low density polyethylene selected by customers for applications that
require maximum strength and toughness. This product offers excellent additive homogeneity, requires no
transfer equipment modification, and facilitates clean and safe handling. Typical applications include cast stretch
film, blown stretch film, and high end film applications. The HF1820 resin offers enhanced film strength,
unitization holding force, drawdown, toughness, and heat seal strength.
Regulatory Status
For regulatory compliance information, see HF1820 Product Stewardship Bulletin (PSB) and Safety Data Sheet
(SDS).

Status Commercial: Active


Availability Asia-Pacific; Europe; North America; South & Central America
Application Blown Stretch Film; Cast Stretch Film; General Purpose Film Packaging; High End
Film Applications
Market Flexible Packaging; Rigid Packaging
Processing Method Blown Film; Cast Film; Sheet and Profile Extrusion

Nominal English Nominal SI


Typical Properties Value Units Value Units Test Method
Physical
Melt Flow Rate, (190 °C/2.16 kg) 2.0 g/10 min 2.0 g/10 min ASTM D1238
Base Resin Density, (23 °C) 0.918 g/cm³ 0.918 g/cm³ ASTM D792
Product Density, (23 °C) 0.918 g/cm³ 0.918 g/cm³ ASTM D792
Film
Cast Film Dart Drop Impact Strength, F50 90 g 90 g ASTM D1709
Blown Film Dart Drop Impact Strength, F50 130 g 130 g ASTM D1709
Cast Film Tensile Strength at Break
MD 5080 psi 35 MPa ASTM D882
TD 3190 psi 22 MPa ASTM D882
Blown Film Tensile Strength at Break
MD 8130 psi 56 MPa ASTM D882
TD 6530 psi 45 MPa ASTM D882
Cast Film Tensile Elongation at Break
MD 380 % 380 % ASTM D882
TD 720 % 720 % ASTM D882
Blown Film Tensile Elongation at Break
MD 750 % 750 % ASTM D882
TD 900 % 900 % ASTM D882
Cast Film 1% Secant Modulus
MD 22600 psi 156 MPa ASTM D882
TD 26600 psi 183 MPa ASTM D882
Blown Film 1% Secant Modulus
MD 34800 psi 240 MPa ASTM D882
TD 42100 psi 290 MPa ASTM D882

LyondellBasell HF1820
Technical Data Sheet Recipient Tracking #:
Date: 9/8/2021 Page 1 of 2 Request #: 3171744
Cast Film Elmendorf Tear Strength
MD 430 g 430 g ASTM D1922
TD 840 g 840 g ASTM D1922
Blown Film Elmendorf Tear Strength
MD 500 g 500 g ASTM D1922
TD 670 g 670 g ASTM D1922
Optical
Cast Film Haze 2 % 2 % ASTM D1003
Blown Film Haze 15 % 15 % ASTM D1003
Cast Film Gloss, (45°) 53 % 53 % ASTM D2457
Blown Film Gloss, (45°) 40 % 40 % ASTM D2457
Additive
Slip None None LYB Method
Antiblock None None LYB Method

Notes
Cast film used for testing was 0.8 mil (20.3 micron) extruded at 455 °F (235 °C) melt temperature.
Blown film sample used for testing was 1.0 mil gauge, 2.5:1 BUR.
These are typical property values not to be construed as specification limits.
Processing Techniques
Using proper techniques, these products can readily be drawn below 0.90 mils at optimum production rates.
Specific recommendations for resin type and processing conditions can only be made when the end use,
required properties and fabrication equipment are known.
Company Information

For further information regarding the LyondellBasell company, please visit http://www.lyb.com/.

© LyondellBasell Industries Holdings, B.V. 2018


Disclaimer

Information in this document is accurate to the best of our knowledge at the date of publication. The document is
designed to provide users general information for safe handling, use, processing, storage, transportation,
disposal and release and does not constitute any warranty or quality specification, either express or implied,
including any warranty of merchantability or fitness for any particular purpose. Users shall determine whether the
product is suitable for their use and can be used safely and legally.

In addition to any prohibitions of use specifically noted in this document, LyondellBasell may further prohibit or
restrict the sale of its products into certain applications. For further information, please contact a LyondellBasell
representative.
Trademarks

The Trademark referenced within the product name is owned or used by the LyondellBasell family of companies.

LyondellBasell HF1820
Technical Data Sheet Recipient Tracking #:
Date: 9/8/2021 Page 2 of 2 Request #: 3171744

You might also like