Empowr Link Shielded Power Cable 5-46 KV
Empowr Link Shielded Power Cable 5-46 KV
Product Construction:
Complete Cable:
Crosslinked semi-conducting conductor shield,
insulation and semi-conducting insulation shield
COPPER CONDUCTOR COPPER WIRE SHIELDED 5kV POWER CABLE
are extruded over a solid or stranded aluminum
COMPACT WIRE APPROXIMATE O.D. (1) NOMINAL APPROX.WEIGHT (1)
CONDUCTOR SHIELD
SH mm kg/km AMPACITY (2) or copper conductor and cured in a single oper-
JACKET
CU NO. NO. WIRE THKNS. ation. An uncoated copper wire shield (helically
AWG OR OF
OF OF SIZE INSUL. WIRE PVC mm CU CU DIRECT IN applied), polyester separator tape and extruded
kcmil WIRES WIRES AWG INSUL. SHIELD SHIELD JACKET (1) COND. SHIELD TOTAL BURIED DUCT black PVC jacket are applied over the cable
core.
2.29 mm 90 mils NOMINAL TRXLPE INSULATION
INSULATION - 5 kV 100% OR 133%
Conductor:
2 7 7 22 12.8 14.6 15.9 19.3 1.5 305 21 588 220 1 70
When copper conductors are supplied, they are
1 18 7 22 13.6 15.4 16.7 20.1 1.5 385 21 685 250 210 annealed, uncoated concentric stranded. Sizes
1/ 0 18 7 22 14.5 16.3 17.6 21.0 1.5 485 21 8 04 2 80 240 #4 AWG to 500 kcmil are compact stranded.
2/ 0 18 8 22 15.5 17.3 18.6 22.0 1.5 612 24 9 60 3 15 270 Sizes 600 kcmil to 1000 kcmil are compress
3/ 0 18 8 22 16.8 18.6 19.9 24.3 2.0 771 24 11 9 8 355 310 stranded. When aluminum conductors are sup-
4/ 0 18 9 22 18.1 19.8 21.1 25.6 2.0 973 27 14 2 9 395 345 plied, they are 1350 Aluminum concentric strand-
250 36 10 22 19.5 21.3 22.6 27.0 2.0 1149
11 30 1637 440 365 ed. Sizes #4 AWG
AWG to 1000 kcmil are compact
stranded.
350 36 11 22 22.0 23.8 25.1 29.5 2.0 1609
16 33 2158 520 435
500 37 12 22 25.0 26.8 28.1 32.5 2.0 2298
22 36 2918 605 505 Conductor Shield:
750 61 * 14 22 30.9 33.2 34.5 39.0 2.0 3 447
34 42 4243 690 570 Extruded semi-conducting thermosetting poly-
1000 61 * 16 22 35.2 37.5 38.8 43.2 2.0 4 5 96
45 48 5 51 5 8 15 685 meric stress control layer.
Insulation:
COPPER CONDUCTOR COPPER WIRE SHIELDED 15kV POWER CABLE Extruded, unfilled Tree Retardant Crosslinked
COMPACT WIRE APPROXIMATE O.D. (1) NOMINAL APPROX.WEIGHT (1) Polyethylene (TRXLPE) as defined in ANSI/ICEA
CONDUCTOR SHIELD
SH mm JACKET kg/km AMPACITY (2) S-94-649.
CU NO. NO. WIRE THKNS.
AWG OR OF
OF OF SIZE INSUL. WIRE PVC mm CU CU DIRECT IN Insulation Shield:
kcmil WIRES WIRES AWG INSUL. SHIELD SHIELD JACKET (1) COND. SHIELD TOTAL BURIED DUCT Extruded semi-conducting thermosetting layer,
clean and free stripping from insulation.
4.45 mm 175 mils NOMINAL TRXLPE INSULATION - 15kV 100% LEVEL
2 7 8 22 17.0 18.7 20.0 2 4. 5 2.0 3 05 24 767 220 170 Metallic Shield:
Helically applied annealed solid bare copper
1 18 9 22 17.8 19.5 20.8 25. 3 2.0 385 27 878 250 210
wires with a lapped non-metallic tape serving as
1/ 0 18 9 22 18.7 20.5 21.8 26. 2 2.0 485 27 1005 280 240
a binder/ separator.
2/ 0 18 10 22 19.7 21.5 22.8 2 7. 2 2.0 612 30 1 16 1 31 5 270
3/ 0 18 10 22 21.0 22.7 24.0 2 8. 5 2.0 771 30 1 36 2 35 5 310 Jacket:
4/ 0 18 11 22 22.2 24.0 25.3 2 9. 7 2.0 973 33 1 60 8 39 5 345 Black, non-conducting, FT1, low temperature
PVC.
25 0 36 11 22 23.7 25.5 26.7 31. 2 2.0 1149
11 33 18 1 6 440 365
35 0 36 12 22 26.2 28.4 29.7 34. 2 2.0 1609
16 36 23 8 2 520 435
50 0 37 14 22 29.2 31.4 32.7 37. 2 2.0 2298
22 42 31 6 3 605 505
75 0 61 * 16 22 35.1 37.4 38.7 43. 1 2.0 3 44 7
34 48 4496 690 5 70
10 0 0 61 * 18 22 39.4 42.4 43.7 49 . 7 2.8 4 596
45 55 6014 815 68 5
27
Medium-Voltage Power Cable Utility
Features and Benefits: ALUMINUM CONDUCTOR COPPER WIRE SHIELDED 5kV POWER CABLE
• CSA C68.3 approval COMPACT WIRE APPROXIMATE O.D. (1) APPROX.WEIGHT (1)
NOMINAL
• 90°C / -40°C CSA C68.3 rated CONDUCTOR SHIELD mm JACKET kg/km AMPACITY (2)
• Triple extruded for clean interfaces AL NO. NO. WIRE THKNS.
• Dry nitrogen cure for enhanced performance AWG OR OF OF SIZE INSUL. WIRE PVC mm AL CU DIRECT IN
• Class 10,000 environment utilized for material kcmil WIRES WIRES AWG INSUL. SHIELD SHIELD JACKET (1) COND. SHIELD TOTAL BURIED DUCT
handling
• Excellent moisture resistance 2.29 mm 90 mils NOMINAL TRXLPE INSULATION - 5 kV 100% OR 133%
• High dielectric strength 2 7 7 22 12.8 14.6 15.9 19.3 1.5 93 21 372 170 140
• Excellent resistance to treeing 1 18 7 22 13.6 15.4 16.7 20.1 1.5 117 21 416 195 160
• Low dielectric loss 1/0 18 7 22 14.5 16.3 17.6 21.0 1.5 147 21 468 220 185
• Clean stripping insulation shield
2/0 18 8 22 15.5 17.3 18.6 22.0 1.5 185 24 528 250 210
• Sequential Meter marking
3/0 18 8 22 16.8 18.6 19.9 24.3 2.0 234 24 662 280 240
Insulation Temperature Rating: 4/0 18 9 22 18.1 19.8 21.1 25.6 2.0 295 27 751 320 275
• Normal...............................................................90°C 250 36 10 22 19.5 21.3 22.6 27.0 2.0 348 30 832 350 290
• Emergency *...................................................130°C 350 36 11 22 22.0 23.8 25.1 29.5 2.0 488 33 1033 420 350
• Short Circuit....................................................250°C
500 37 12 22 25.0 26.8 28.1 32.5 2.0 697 36 1316 500 420
* Operation at the emergency overload temper- 750 59 14 22 29.5 31.8 33.0 37.5 2.0 1045 42 1806 595 505
ature shall not exceed 1500 hours cumulative 1000 59 15 22 33.4 35.7 37.0 41.4 2.0 1393 45 2267 700 600
during the lifetime of the cable.
(1) Extruded layer thicknesses are in accordance with CSA C68.3 for Shielded Power Cables Rated 5- 46kV. Dimensions and weights are nominal,
subject to manufacturing tolerences.
(2) Ampacities based on IEEE 835 for three phase, shielded power cables, with drain wire shields bonded at both ends, @ 100% load factor, 25°C
earth ambient, 90°C conductor temperature, soil rho of 90°C-cm/watt, 7.5" horizontal spacing configuration K or O (flat configuration), one iso-
lated circuit buried 36" deep.
28
Utility Medium-Voltage Power Cable
29
Medium-Voltage Power Cable Utility
(1) Extruded layer thicknesses are in accordance with CSA C68.3 for Shielded Power Cables Rated 5-46kV. Dimensions and weights are nominal,
subject to manufacturing tolerences.
(2) Ampacities based on IEEE 835 for three phase, shielded power cables, with drain wire shields bonded at both ends, @ 100% load factor, 25°C
earth ambient, 90°C conductor temperature, soil rho of 90°C-cm/watt, 7.5" horizontal spacing, configuration K or O (flat configuration), one
isolated circuit buried 36" deep.
30