Scribd
Upload
345 views

List of Important Questions of Refrigeration and Air-Conditioning

This document lists 25 important questions about refrigeration and air conditioning systems. The questions cover topics such as vapor compression refrigeration cycles, aircraft air conditioning systems, thermostatic expansion valves, air refrigeration cycles, absorption refrigeration, psychrometrics, duct design, heat loads, comfort factors, and components of air conditioning systems like filters, humidifiers, and cooling coils. The document provides data and diagrams to help explain and solve problems involving refrigeration and air conditioning concepts and systems.

Uploaded by

kevin mehta
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
345 views

List of Important Questions of Refrigeration and Air-Conditioning

This document lists 25 important questions about refrigeration and air conditioning systems. The questions cover topics such as vapor compression refrigeration cycles, aircraft air conditioning systems, thermostatic expansion valves, air refrigeration cycles, absorption refrigeration, psychrometrics, duct design, heat loads, comfort factors, and components of air conditioning systems like filters, humidifiers, and cooling coils. The document provides data and diagrams to help explain and solve problems involving refrigeration and air conditioning concepts and systems.

Uploaded by

kevin mehta
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

List of important questions of Refrigeration and Air-conditioning

1. Explain the effect of suction pressure, delivery pressure and sub cooling on the
performance of vapour compression refrigeration using P-h and T-S diagram.
2. State the Name of different types of system used for cooling of aircraft cabin. Explain
with neat sketch Bootstrap air Refrigeration system with T-S diagram.
3. A R-12 Vapour compression system has saturated suction temperature of -5°C and
saturated discharge temperature of 40°C. The refrigerant vapour is dry-saturated at the
suction of compressor and becomes superheated after compression. For one ton of
refrigeration capacity, Calculate (i) work done (ii) mass flow rate, (iii) COP
4. Explain Bell Coleman air refrigeration system with P-V and T-S diagram. And derive
equation of COP.
5. Explain standard vapour compression refrigeration cycle with T-S and P-H diagram.
Mention advantages of vapour compression refrigeration system over air refrigeration
system.
6. Explain construction, working, advantages and disadvantages of Thermostatic Expansion
valve with neat sketch.
7. An air refrigerator working on Bell Coleman cycle takes in air at 1 bar and at a
temperature of 100 oC. The air is compressed to5 bar abs. The same is cooled to 25 0 C in
the cooler before expanding in the expansion cylinder to cold chamber pressure of 1 bar.
The compression and expansion laws followed arepv1.35 = C and pv1.3 = C respectively.
Determine net refrigeration effect per kg of air and COP. Take Cp = 1.009 kJ/kg K and R
= 0.287 kJ/kg K for air.
8. In a 13 TR ammonia refrigeration plant, the condensing temperature is 30 ˚C and
evaporating temperature -10˚C. The refrigerant ammonia is sub-cooled by 5°C before
passing through the throttle valve. The vapor leaving the evaporator is 0.87 dry.
Find: 1. Coefficient of performance 2. Power required.
9. Explain simple vapour absorption system with schematic diagram.
10. What is refrigerant? Explain in brief desired properties of good refrigerant.
11. Explain with neat sketch working of Electrolux Refrigerator.
12. Mention the limitations of Simple vapour compression refrigeration cycle. Briefly explain
the working of two stage compression with water intercooler and liquid sub-cooler
employed for vapour compression system.
13. Explain working of Li-Br vapour absorption refrigeration system.
14. Following data is available for an air conditioning system comprising of filter, cooling
coil, fan and distribution system using only fresh air for the purpose of maintaining
comfort conditions in summer. RSH = 11.63 KW, RLH = 2.33 KW. Outside design
condition: 28°C DBT, 20°C WBT. Inside design condition: 21°C DBT, 50% RH.
Temperature of air entering the room = 11°C. Calculate (i) RSHF (ii) Coil bypass factor
(iii) rate of flow of air kg/hr. (iv) Load on cooling coil (v) Coil ADP
15. Explain the procedure for calculating cooling load due to infiltration air.
16. Define Effective Temperature. Explain various factors governing effective temperature.
17. State and explain various heat loads to be considered for cooling load calculations of a
typical building.
18. A circular duct of 40cm is selected to carry in air-conditioned space at a velocity of 440
m/min to keep noise level at a desired level. If this duct is to be replace by a rectangular
duct of aspect ratio of 1.5 Find out size of a rectangular duct for equal friction method
when (i) when velocity of air in two duct is same (ii) the discharge rate of air in two duct
is same.
19. The sling- psychrometry reads 400C DBT and 280C WBT calculate followings:
(i) Specific humidity (ii) Relative humidity (iii) Vapor density in air (iv) Dew point temperature
Assume atmospheric pressure to be 1.03 bar.

20. Answer the following (i) Explain the factor affecting human comfort (ii) Flywheel effect
of building material (iii) Explain Flooded and DX (dry expansion) type evaporator with
neat sketch.
21. Following data is available for an air conditioning system comprising of filter, cooling
coil, fan and distribution system using only fresh air for the purpose of maintaining
comfort conditions in summer. RSH = 11.63 KW, RLH = 2.33 KW. Outside design
condition: 28°C DBT, 20°C WBT. Inside design condition: 21°C DBT, 50% RH.
Temperature of air entering the room = 11°C. Calculate (i) RSHF (ii) Coil bypass factor
(iii) rate of flow of air kg/hr. (iv) Load on cooling coil (v) Coil ADP
22. Write short note on :(a) Split air conditioner(b) Sources of Heat load (c) Central air
conditioner
23. Explain in brief the following: (1) Filters (2) Humidifiers used in air conditioning
systems.
24. State main applications of Refrigeration. Explain Ice making plant with a suitable
diagram.
25. Define following terms:- TOR, refrigeration effect, COP, DBT, WBT, DPT, Absolute humidity,
Relative Humidity, Specific Humidity, Bypass factor, sensible heat factor, Psychrometric
processes with psychrometry chart.

You might also like