Scribd
Upload
2K views

Typical KNX GRMS With IP

This document outlines the KNX IP network configuration for a building across three floors. Room 1, 8, 9, and 17 on each floor are connected to the KNX IP network through power supplies, bus couplers, and transponders/holders/actuators. A data network connects the rooms on each floor and all three floors are connected through a KNX-IP connection.

Uploaded by

NATHAN
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Typical KNX GRMS With IP

This document outlines the KNX IP network configuration for a building across three floors. Room 1, 8, 9, and 17 on each floor are connected to the KNX IP network through power supplies, bus couplers, and transponders/holders/actuators. A data network connects the rooms on each floor and all three floors are connected through a KNX-IP connection.

Uploaded by

NATHAN
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ROOM

 1   ROOM  8   ROOM  9   ROOM  17  

KNX  -­‐  IP  

POWER     BUS   POWER     KNX  


6°  FLOOR   SUPPLY   COUPLER   SUPPLY  

SELV  24V  

GENERIC  LOAD    
DATA  NETWORK  (EXISTING  OR  DEDICATED  TO  KNX  

SINGLE  ROOM  CONNECTION   4  LIGHTS  OR  2  SHUTTERS  


KNX  
230V  ac  

TRANSPONDER     TRANSPONDER     SWITCHING     DIMMING  


READER   HOLDER   ACTUATOR   ACTUATOR  

230V  ac  

ROOM  1   ROOM  8   ROOM  9   ROOM  17  

KNX  -­‐  IP  

POWER     BUS   POWER    


SUPPLY   COUPLER   SUPPLY   KNX  
2°  FLOOR  

SELV  24V  

ROOM  1   ROOM  8   ROOM  9   ROOM  17  

KNX  -­‐  IP  

POWER     BUS   POWER     KNX  


1°  FLOOR   SUPPLY   COUPLER   SUPPLY  

SELV  24V  

PC  

You might also like