APD3224ZGCK-F01

3.2 x 2.4 mm SMD Chip LED Lamp

DESCRIPTIONS PACKAGE DIMENSIONS

The Green source color devices are made with
InGaN on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
electrically grounded

FEATURES
3.2 x 2.4 mm SMD LED, 2.4 mm thickness
Low power consumption
Ideal for backlight and indicator
Package: 1500 pcs / reel
Moisture sensitivity level: 3
RoHS compliant

APPLICATIONS
Backlight
Status indicator
Home and smart appliances RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Wearable and portable devices
Healthcare applications

ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices

Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.

SELECTION GUIDE
Iv (mcd) @ 20mA [2] Viewing Angle [1]
Emitting Color
Part Number Lens Type
(Material)
Min. Typ. 2θ1/2

APD3224ZGCK-F01 ■ Green (InGaN) Water Clear 3600 6800 20°

Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.

© 2019 Kingbright. All Rights Reserved. Spec No: DSAM6310 / 1203014822 Rev No: V.6B Date: 04/12/2019 Page 1 / 4
 APD3224ZGCK-F01
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Value
Parameter Symbol Emitting Color Unit
Typ. Max.

Wavelength at Peak Emission IF = 20mA λpeak Green 515 - nm

Dominant Wavelength IF = 20mA λdom [1] Green 525 - nm

Spectral Bandwidth at 50% Φ REL MAX

Δλ Green 35 - nm
IF = 20mA

Capacitance C Green 45 - pF

Forward Voltage IF = 20mA VF [2] Green 3.3 4.1 V

Reverse Current (VR = 5V) IR Green - 50 µA

Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.

ABSOLUTE MAXIMUM RATINGS at TA=25°C

Parameter Symbol Value Unit

Power Dissipation PD 102.5 mW

Reverse Voltage VR 5 V

Junction Temperature Tj 115 °C

Operating Temperature Top -40 to +85 °C

Storage Temperature Tstg -40 to +85 °C

DC Forward Current IF 25 mA

Peak Forward Current IFM [1] 150 mA

Electrostatic Discharge Threshold (HBM) - 450 V

Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.

© 2019 Kingbright. All Rights Reserved. Spec No: DSAM6310 / 1203014822 Rev No: V.6B Date: 04/12/2019 Page 2 / 4
 APD3224ZGCK-F01
TECHNICAL DATA
RELATIVE INTENSITY vs. WAVELENGTH SPATIAL DISTRIBUTION

Green
100% -15° 0°
15°
Ta = 25 °C Ta = 25 °C
-30° 30°
Relative Intensity (a. u.)

80%
-45° 45°
60%

-60° 60°
40%

20%
-75° 75°

0%
350 400 450 500 550 600 650 700 750 800 -90° 90°
Wavelength (nm) 1.0 0.5 0.0 0.5 1.0

GREEN
Forward Current vs. Luminous Intensity vs. Forward Current Derating Curve Luminous Intensity vs.
Forward Voltage Forward Current Ambient Temperature
50 2.5 50 2.5

Permissible forward current (mA)

Luminous intensity normalised at

Luminous intensity normalised at

Ta = 25 °C Ta = 25 °C
40 2.0 40 2.0
Forward current (mA)

Ta = 25 °C
30 1.5 30 1.5
20 mA

20 1.0 20 1.0

10 0.5 10 0.5

0 0.0 0 0.0
2.0 2.5 3.0 3.5 4.0 4.5 0 10 20 30 40 50 -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100
Forward voltage (V) Forward current (mA) Ambient temperature (°C) Ambient temperature (°C)

REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS TAPE SPECIFICATIONS (units : mm)

REEL DIMENSION (units : mm)

Notes:
1. Don't cause stress to the LEDs while it is exposed to high temperature.
2. The maximum number of reflow soldering passes is 2 times.
3. Reflow soldering is recommended. Other soldering methods are not recommended as they might
cause damage to the product.

© 2019 Kingbright. All Rights Reserved. Spec No: DSAM6310 / 1203014822 Rev No: V.6B Date: 04/12/2019 Page 3 / 4
 APD3224ZGCK-F01
PACKING & LABEL SPECIFICATIONS

PRECAUTIONARY NOTES
1. The information included in this document reflects representative usage scenarios and is intended for technical reference only.
2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to
the latest datasheet for the updated specifications.
3. When using the products referenced in this document, please make sure the product is being operated within the environmental and electrical limits specified in the datasheet. If
customer usage exceeds the specified limits, Kingbright will not be responsible for any subsequent issues.
4. The information in this document applies to typical usage in consumer electronics applications. If customer's application has special reliability requirements or have life-threatening
liabilities, such as automotive or medical usage, please consult with Kingbright representative for further assistance.
5. The contents and information of this document may not be reproduced or re-transmitted without permission by Kingbright.
6. All design applications should refer to Kingbright application notes available at https://www.KingbrightUSA.com/ApplicationNotes

© 2019 Kingbright. All Rights Reserved. Spec No: DSAM6310 / 1203014822 Rev No: V.6B Date: 04/12/2019 Page 4 / 4
Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Kingbright:
APD3224ZGCK-F01