C4.

4 (electronic)
MARINE GENERATOR SET

65, 75, 99,118 ekW (75, 94, 124, 148 kVA) 60 Hz

Heat Exchanger / Single Circuit Keel /
Combined Circuit Keel

GENERAL ENGINE SPECIFICATIONS

Basic Engine Specifications
In-line 4 cylinder, 4-Stroke-Cycle-Diesel
Rated engine speed ............................................ 1800 rpm
Bore ........................................................ 105 mm (4.13 in)
Stroke ........................................................ 127 mm (5.0 in)
Aspiration ................................ Turbocharged / Aftercooled
Governor ..................................................................... ECU
Fuel system type .......................................... Common Rail
Length (overall) .................... 1699-1769 mm (66.9-69.6 in)
Width ....................................................... 956 mm (37.6 in)
Height ....................................................... 1245 mm (49 in)
Weight, net dry (approx.) ...... 1142-1290 kg (2518-2844 lb)
Rotation (from flywheel end) .................. Counter-clockwise
Cat® C4.4
Marine Generator Set Package
Image shown may not reflect actual engine

Tolerances
Power ........................................................................ +/- 3%
Emission Compliance
Exhaust Stack Temperature ..................................... +/- 8%
Inlet Air Flow ............................................................. +/- 5% U.S. EPA Tier 3
Intake Manifold Pressure ........................................ +/- 10% EU Stage V
Exhaust Flow ............................................................ +/- 6%
Specific Fuel Consumption ....................................... +/- 3% Marine Classification Society – Certifications
Heat Rejection .......................................................... +/- 5% ABS – BV – DNV – LR – RINA – CCS - NK
Fuel Rate .................................................................. +/- 5%

Generator Air Flow 60 Hz …………………….…0.32 m3/s (678 cfm)

Insulation …………….………………………….……Class H Excitation System ………………….……………….AREP
Temperature Rise Voltage Regulation (steady state) …….….…………±1%
@ 40°C Ambient (110%)……..……………Class H (150°K) Total Harmonic Content LL/LN…………..………….<4%
@ 50°C Ambient (110%) ………………… Class H (140°K) Wave Form: NEMA=TIF………………….…….……. <50
Winding Pitch Code ………………………………………2/3 Wave Form: I.E.C.=THF …………………..…………<2%
Terminals ……………………………12-lead reconnectable Standard Voltages…………………………..…….< 690 V
Ingress Protection Rating………….….…………....…IP 23

• For detailed information about fuel, oil, and cooling water treatment, please refer to “Caterpillar Commercial Diesel Engine Fluids
Recommendations” (SEBU6251).

Page 1 of 3

LEHM20671-00
C4.4 (electronic)
MARINE GENERATOR SET PACKAGE

AIR SYSTEM

Combustion Air Inlet System

Intake combustion air flow ..................... 8.3m3/min (118 ekW), 7.6m3/min (99 ekW), 6.9m3/min (75 ekW), 6.1m3/min (65ekW)
Intake combustion air flow ........................................ 293cfm (118ekW), 270cfm (99 ekW), 244cfm (75 ekW) 215cfm (65 ekW)
Intake combustion air temperature up to.................................................................................................................. 50°C (122°F)
Engine Room Ventilation Air
Heat rejection to atmosphere ......................................... 8.4kW (118ekW), 8.4kW (99 ekW), 8.4kW (75 ekW), 8.4kW (65 ekW),
Heat rejection to atmosphere .... 477BTU/min (118ekW) 477BTU/min (99 ekW), 477BTU/min (75 ekW), 477BTU/min (65 ekW)

COOLING SYSTEM

HTC Cooling Water System (Engine Jacket Water)

Heat rejection to HTC cooling water system ............ 93.0kW (188ekW), 81.4kW (99 ekW), 66.3kW (75 ekW), 55.7kW (65 ekW)
Heat rejection to HTC cooling water system ………. 5291BTU/min (118ekW), 4631BTU/min (99 ekW), 3772BTU/min (75 ekW),
3169BTU/min (65 ekW)
Flow HTC cooling water pump – max. ....................................................................................................... 190 L/m (50 gal/min)
min. ................................................................................................144.5 L/min (38.2 gal/min)
HTC cooling water temperature engine out (nominal) ............................................................................................... 95°C (203°F)
HTC cooling water refill capacity (Hex) ...................................................................................................................... 21 L (10 gal)
Coolant medium ..........................................................................................................Cat® Extended Life Coolant (ELC) or equal
Expansion tank pressure cap ............................................................................................................................. 50 kPa (7.25 psi)
HTC cooling water connection engine inlet ................................................................................................. 50.8 mm (2.0 in.) OD
HTC cooling water connection engine outlet ............................................................................................... 50.8 mm (2.0 in.) OD
LTC Cooling Water System (Aftercooler)
Heat rejection to LTC cooling water system ................ 16.8kW (118ekW), 12.6kW (99 ekW), 8.2kW (75 ekW), 5.3kW (65 ekW)
Heat rejection to LTC cooling water system .................. 956BTU/min (118ekW), 717BTU/min (99 ekW), 467BTU/min (75 ekW)
328BTU/min (65 ekW)
Flow LTC cooling water pump 2484130 – max. .................................................................................... 150 L/Min (39.5gal/min)
min. .................................................................................... 120 L/min (31.7 gal/min)
LTC water temperature engine in (max.) ...................................... 42° (118ekW), 45°c (99 ekW), 48°c (75 ekW), 49°c (65 ekW)
LTC cooling water refill capacity ................................................................................................................................ 4 L (1.0 gal)
Engine only
Coolant medium .......................................................................................................... Cat Extended Life Coolant (ELC) or equal
Expansion tank pressure cap ............................................................................................................................. 50 kPa (7.25 psi)
LTC cooling water connection engine inlet (138) ......................................................................................... 50.8 mm (2.0 in.) OD
LTC cooling water connection engine outlet (139) ....................................................................................... 50.8 mm (2.0 in.) OD

EXHAUST SYSTEM

Exhaust Gas Data

Exhaust gas flow (total) .............................10.4 kg/min (118ekW), 9.5kg/min (99 ekW), 8.5kg/min (75 ekW), 7.5kg/min (65 ekW)
Exhaust stack temperature .................................................. 431° (118ekW), 419°C (99 ekW), 404°C (75 ekW), 395°C (65 ekW)
Exhaust stack temperature ............................................... 808°F (118ekW), 786°F (99 ekW), 7593°F (75 ekW), 743°F (65 ekW)
Engine exhaust connection ............................................... 63 mm (2.5 in) ID, 6 x 9 mm (0.35 in) holes on 88.9 mm (3.5 in) PCD
Max. allowable system backpressure ............................................................................................................... 15 kPa (60 in H2O)
Specified system backpressure shall not be exceeded in any circumstances. Caterpillar advises to limit value of maximum
allowable backpressure to 50% for new (clean) installations. Minimum diameter of customer piping should be according to
“Customer piping diameter overview for Caterpillar engines.”
Page 2 of 3
LEHM20671-00
C4.4 (electronic)
MARINE GENERATOR SET PACKAGE

FUEL SYSTEM

Specific fuel consumption ......... 205 g/bkWh (118ekW), 220g/bkW-hr (99 ekW), 232g/bkW-hr (75 ekW), 241g/bkW-hr (65 ekW)
Fuel rate ........................................................ 26.3kg/hr (118ekW), 23.9kg/hr (99 ekW), 19.1kg/hr (75 ekW), 16.1kg/hr (65 ekW)
Fuel flow transfer pump ................................................................................................................................ 4.1 L/min (64.9gal/hr)
Fuel pressure static head …................................................................................................................................... ± 2.8 m ( ± 9.2 ft)
Fuel supply line restriction (max.) ..................................................................................................... 10 kPa (2.9 in Hg) (1.45 psi)
Fuel temperature transfer pump in (max.) ................................................................................................................ 60°C (140°F)
Fuel return line restriction (max.) ...................................................................................................... 10 kPa (2.9 in Hg) (1.45 psi)
Fuel supply / return connections .............................................................................................. 11 / 16 in O ring face seal (ORFS)
Diesel fuel grade………..…………………...ISO-F-DMX/ISO-F-DMA/ISO 8217:2010 (E) Class F, EN590, D975, JIS class 1,2,3

LUBE SYSTEM

Sump type .......................................................................................................................................................................... Isolated

Sump capacity (max.) ............................................................................................................................................. 11 L (5.55 gal)
Sump capacity (min.) ................................................................................................................................................ 9 L (4.62 gal)
Sump refill capacity (with filter change) .................................................................................................................. 11 L (5.55 gal)
Oil change interval ............................................................................................................................................................. 500 Hr
(can be extended by S•O•SSM testing)
Max. installation angle (any direction) .......................................................................................................................... 25 degrees
Max continuous operation angle (any direction) .......................................................................................................... 25 degrees
Max. intermittent operation angle (any direction) ......................................................................................................... 30 degrees
Quality diesel engine oil (min.) .................................................................................................................. CI-4 10W30 or 15W40
(compliant with Caterpillar specification ECF-2)

STARTING SYSTEM

Electrical Starting System

Electrical starting motor............................................................................................................................................. 24 or 12 VDC
Cold starting ..................................................................................................................................................................... 800 CCA
[at -15°C (5°F) ambient temperature]

SOUND DATA (ISO 8528-10)

Mechanical Sound Pressure ........................................... Mechanical Sound Power ................................................

118 ekW ......................................................... 101.5dB(A)*
118 ekW at distance 1 m (3.28 ft) ......................86.3dB(A)
99 ekW at distance 1 m (3.28 ft) ....................... 86.2dB(A) 99 ekW ........................................................... 101.4dB(A)*
75 ekW at distance 1 m (3.28 ft) ....................... 86.7dB(A) 75 ekW ........................................................... 101.9dB(A)*
65 ekW at distance 1 m (3.28 ft) ....................... 87.1dB(A) 65 ekW…….……………………………………..102.3 dB(A)*

*Mechanical sound pressure and power levels measured according to ISO 8528-10 with engine at 75% load.

© 2021 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, LET’S DO THE WORK, their respective logos, "Caterpillar Corporate Yellow", the "Power Edge" and Cat “Modern Hex” trade dress
as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission

Materials and specifications are subject to change without notice.

The International System of Units (SI) is used in this publication
LEHM20671-00