Scribd
Upload
35 views

LAB 1 Computer Specification

This lab document outlines an assignment for students to identify the specifications of their computer in detail using the BIOS configuration setup and the CPUZ utility program. Students will access configuration details through the BIOS, Windows properties, and by running CPUZ to extract information about the CPU, memory, motherboard, graphics card, and other components. The results are to be recorded in a table to document the system configuration obtained from both the BIOS and CPUZ.

Uploaded by

Hani
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
35 views

LAB 1 Computer Specification

This lab document outlines an assignment for students to identify the specifications of their computer in detail using the BIOS configuration setup and the CPUZ utility program. Students will access configuration details through the BIOS, Windows properties, and by running CPUZ to extract information about the CPU, memory, motherboard, graphics card, and other components. The results are to be recorded in a table to document the system configuration obtained from both the BIOS and CPUZ.

Uploaded by

Hani
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

CSC204

Name:

Matric Card No:

LAB 1
Title: To identify computer specification in details via BIOS configuration setup and CPUZ
Utility.

Objective : 1. To enable students to identify their computers’ specification in details


using BIOS configuration setup and free utility called CPUZ.
2. To enable students to configure the bios configuration setup and
determine the important configuration details for their computer.
3. To help students become familiar with free utility program called CPUZ
4. To enable them to specify the computer specification details from
THREE (3) different ways namely BIOS, Windows, and utility program.

Prerequisites Student must use his/her own laptop computer with Windows installation ready

Method 1. using BIOS configuration setup


i. During POST, press the BIOS setup key or key combination (F1,
F2, DEL, CTRL +ALT+DEL , key depend on your computer
model or type)

ii. The BIOS setup program screen will appear

1
iii. Choose the configuration menu at menu option :

a) Main System Information

b) Advanced CPU Configuration

c) Advanced Chipset

2
iv. Exit the bios setup and discard any changes.

2. Using CPUZ Utility

i. Download and install the CPUZ from


http://www.cpuid.com/softwares/cpu-z.html
ii. Run the setup executable file, and follow the installation process.
iii. Once the installation is completed, run the CPUZ application.
iv. Below are the information that can be extracted from the CPUZ

Component Details

CPU Name and number


Core stepping and process
Package
Core voltage
Internal and external clocks, clock multiplier
Supported instruction sets
Cache information.

Mainboard Vendor, model and revision.


BIOS model and date.
Chipset (northbridge and southbridge) and
sensor.
Graphic interface.

Memory Frequency and timings.


Module(s) specification using SPD (Serial
Presence Detect) : vendor, serial number,
timings table.

System Windows and DirectX version.

Graphic GPU, Name, Vendor, Clock and Memory

3
3. From Windows XP (as an example)

i. Right Click Computer and choose properties

ii. or under Control Panel\System and Security\System, basic


information about computer will be displayed

4
YOUR FINDINGS

Fill up the table below based on the findings that you have got both from BIOS and
CPUZ.

System Configuration

Laptop Vendor

BIOS CPUZ

Processor
i. Processor name
ii. Processor Frequency
iii. Number of Cores

Cache
i. L1
ii. L2
iii. L3

5
Memory
i. Capacity
ii. Frequency
iii. Number of Channel

Motherboard (Chipset)

Input and Output

Graphic Card
i. Vendor
ii. Memory Capacity

BIOS
Name and Version

CPU Technology

Operating System

You might also like