‘19/2021 Earthquake Resistant Design of Foundations -- Unit 4 - Wook 2 %i (htpsztswayam govinne_ details NPTEL) [ SWayaina ) (https:/swayam.gowin) [email protected] ~ NPTEL (https://swayam.gov.in/explorer?ncCode=NPTEL) » Earthquake Resistant Design of Foundations (course) outing Assignment 2 ‘Assignment not submitled Due date: 2021-08-18, 23:59 IST. How does an NPTEL online 1) Acombined footing needs to be designed under two column loads. The 1 point course work? column that is eccentric with respect to spread footing carries a lighter load than the interior column for which enough space is available, Which type of footing will Week 0 be most suitable Week 1 OReetangular O Trapezoidal Week 2 OStrap O Lecture 6 OSpread Combined 2) Which of the following statement is correct with respect to a combined 1 point Footings (unit? footing urit=228less0n=23) Lecture 7: Raft CO Ina rectangular footing the column that has limited space carries a larger load Foundations: O Ima trapezoidal footing the column that has limited space carries a smaller load Reautements Oma rectangular footing the interior column carries a smaller load (unt? ONone ofthe above urit=228lesson=24) 3) A strap footing is most suitable when 1 point Lecture 8: Ratt Foundations O The distance between two columns is large and allowable soil pressure is, Methods of relatively small Analysis (unit? O The distance between two columns is small and allowable soil pressure is unit=228lesson=25) relatively large Lecture 9: O The distance between two columns is small and allowable soil pressure is Footings under Dynamic relatively small Loads O The distance between two columns is large and allowable soil pressure is relatively Eccentric and large hitpsslonlinecourses.nptl ac.in/noc21_ce7 luni ?unit=228assessmont=80 18‘19/2021 Inctines Loads, A New Method (unit? unit=228lesson=26) Lecture 10: Footings under Dynamic Loads: Design Procedure and Example on a New Method (unit? unit=228lesson=27) Quiz: Assignment 2 (assessment? name=80) Week 2 Feedback Form: Earthquake Resistant Design of Foundations (unit? unit=2281esson=82) Week 3 Download Videos Earthquake Resistant Design of Foundations -- Unit 4 - Wook 2 4) The important task in the analysis of a raft foundation is the determination of the 1 point distribution of contact pressure undemeath the raft which is a complex function of the rigidity ofthe ORaf itselt O supporting soil O superstructure Oallof the above 5) The conventional method of analysis of raft foundation is based on the 1 point assumption of linear distribution of contact pressure. The basic assumptions of this method are O The foundation is rigid relative to the supporting soil O The contact pressure variation is assumed as planar OBoth A and B ONeither A nor B 6) The rigid foundation (conventional) method of analysis of raftcanbe 1 point used if following condition is satisfied O The structure behaves as a rigid (K > 0.5) O The column spacing is less than 1.75/2. © Both the structure behaves as a rigid (K > 0.5) and the column spacing is less than LISA O ither the structure behav L752. column spacing is less than as a rigid (K > 0.5) or th 7) The flexible foundation (simplified) method of analysis of raft can be 1 point used if following condition is satisfied O The structure behaves as a flexible (K< 0.5) O The variation in adjacent column loads does not exceed 20% of higher value O Fither of (A) or (B) is satisfied O Both (A) and (B) need to be satisfied 8) A square footing of size 2 m*2 m in plan and of depth 1 mis subjected 1 point to a vertical load 80 KN and moment 40 kN-m. According to Meyerhof (1953), effective width of footing is Oim O2m O2sm Olsm ‘Baran (1969) proposed a new method of designing eccentrically loaded 1 point footings, according to this, nondimensional bearing capacity factors Nc, Nq and Ng are function of Where, is angle of internal friction of soil, ¢ is eccentricity, B and L are dimensions of footing Ob only hitpsslonlinecourses.nptl ac.in/noc21_ce7 luni ?unit=228assessmont=80 29‘19/2021 Earthquake Resistant Design of Foundations -- Unit 4 - Wook 2 OcB only O Both 6 and e/B 6, e/B and (BIL) 10) To deal with eccentric inclined load on a footing, Prakash et al. (1979) 1 point suggested a methodology, according to this to find ultimate bearing capacity O Reduced width shall be used O Reduced bearing capacity factors shall be used ON reduction in width or in values of bearing capacity factors is required OBoth reduced width and reduced bearing capacity factors shall be used You may submit any number of times before the due date. The final submission will be considered for grading, ‘Submit Answers hitpsslonlinecourses.nptl ac.in/noc21_ce7 luni ?unit=228assessmont=80 39