05–15

DIAGNOSTICS – SFI SYSTEM (April, 2003)

05286–12

TERMINALS OF ECM

E3 E4 E5 E6

A66714

Symbols (Terminals No.) Wiring Color Terminal Description Condition STD Voltage (V)
Battery (for measuring the
BATT (E6 – 3) – E1 (E4 – 7) R–W – BR battery voltage and for the Always 8 to 14
ECM memory)
IG switch ON 8 to 14
FC (E6 – 10) – E1 (E4 – 7) G R – BR
G–R Fuel pump control
Idling Below 1.5
Idling 8 to 14
W (E6 – 11) – E1 (E4 – 7) R Y – BR
R–Y MIL
IG switch ON Below 3.5
+B (E6 – 1) – E1 (E4 – 7) B – BR Power source of ECM IG switch ON 8 to 14
IG switch ON, Brake pedal de-
8 to 14
STP (E5 – 19) *1 – E1 (E4 – 7) G–W
G W – BR Stop light switch
Sto pressed
IG switch ON, Brake pedal released Below 1.5
F/PS (E6 – 14) – E1 (E4 – 7) Y – BR Airbag sensor IG switch ON Pulse generation
STA (E4 – 9) – E1 (E4 – 7) B – BR Starter signal Cranking 5.5 or more
Power steering oil pres-
PSW (E4 – 29) – E1 (E4 – 7) L–R – BR IG switch ON 8 to 14
sure sensor
Speed signal from com- IG switch ON, rotate driving wheel
SPD (E5 – 17) – E1 (E4 – 7) V–W – BR Pulse generation
bination meter slowly
TACH (E6 – 5) – E1 (E4 – 7) B – BR Engine speed Idling Pulse generation
Power source of sensor
VC (E3 – 18) – E2 (E3 – 28) Y – BR IG switch ON 4.5 to 5.5
(a specific voltage)
EVP (E3 – 12) – E01 (E3 – 7) L–B – W–B VSV for EVAP IG switch ON 8 to 14
CCV (E5 – 1) – E01 (E3 – 7) L – W–B VSV for CCV IG switch ON 9 to 14
VSV for Vapor pressure
TBP (E6 – 4) – E01 (E3 – 7) R – W–B IG switch ON 9 to 14
sensor
Ignition switch ON 2.9 to 3.7
PTNK (E6 – 21) – E2 (E3 – 28) L – BR Vapor pressure sensor Apply vacuum 4.0 kPa (30 mmHG,
Below 0.5
1.18 in.Hg)
VG (E4 – 24) – EVG (E4 – 32) G – L–W Mass air flow sensor Idling, A/C switch OFF 1.1 to 1.5
Heated oxygen sensor Maintain engine speed at 2,500 rpm Pulse generation
OX1A (E4 – 23) – E1 (E4 – 7) B – BR
(Sensor 1) for 2 min. after warning up (See Page 05–96)
Heated oxygen sensor Idling Below 3.0
HT1A (E4 – 4) – E03 (E4 – 5) P – W–B
W B
heater (Sensor 1) IG switch ON 9 to 14
Heated oxygen sensor Maintain engine speed at 2,500 rpm Pulse generation
OX1B (E4 – 21) – E1 (E4 – 7) W – BR
(Sensor 2) for 2 min. after warning up (See Page 05–96)
Heated oxygen sensor Idling Below 3.0
HT1B (E5 – 4) – E03 (E4 – 5) P B – W–B
P–B W B
heater (Sensor 2) IG switch ON 9 to 14
2004 COROLLA (RM1037U)

Author: Date: 180

05–16
DIAGNOSTICS – SFI SYSTEM (April, 2003)

Symbols (Terminals No.) Wiring Color Terminal Description Condition STD Voltage (V)
Engine coolant tempera- Idling, Engine coolant temp. at 80°C
THW (E3 – 19) – E2 (E3 – 28) W – BR 0.2 to 1.0
ture sensor (176°F)
G22+ (E3 – 26) Pulse generation
B–W Camshaft position sensor Idling
– NE– (E3 – 34) (See Page 05–168)
Crankshaft position sen- Pulse generation
NE+ (E3 – 27) – NE– (E3 – 34) B–W Idling
sor See Page 05–168)
Intake air temperature Idling, intake air temp. at 20°C
THA (E3 – 20) – E2 (E3 – 28) Y–B – BR 0.5 to 3.4
sensor (68°F)
IG switch ON, throttle valve fully
0.3 to 1.0
closed
VTA (E3 – 21) – E2 (E3 – 28) LG – BR Throttle position sensor
IG switch ON, throttle valve fully
3.2 to 4.9
open
#10 (E3 – 1) – E01 (E3 – 7) Y – W–B
#20 (E3 – 2) – E01 (E3 – 7) B – W–B
Injector IG switch ON 8 to 14
#30 (E3 – 3) – E01 (E3 – 7) W – W–B
#40 (E3 – 4) – E01 (E3 – 7) L – W–B
IGT1 (E3 – 8) – E1 (E4 – 7) R–L – BR
IGT2 (E3 – 9) – E1 (E4 – 7) Y–G – BR Ignition coil and igniter Pulse generation
Idling
IGT3 (E3 – 10) – E1 (E4 – 7) GR – BR ((ignition
g signal)
g ) ((See Page
g 05–177))
IGT4 (E3 – 11) – E1 (E4 – 7) W – BR

Ignition coil and igniter IG switch ON 4.5 to 5.5

IGF (E3 – 23) – E1 (E4 – 7) L–Y – BR (ignition confirmation sig- Pulse generation
Idling
nal) (See Page 05–177)
RSO (E3 – 5) – E01 (E3 – 7) B–L – W–B Idle air control valve IG switch ON 9 to 14
OCV+ (E3 – 15) Camshaft timing oil con- Pulse generation
Y – B–Y IG switch ON
– OCV– (E3 – 14) trol valve (See Page 05–44)
Pulse generation
KNK1 (E4 – 1) – EKNK (E4 – 2) B–W Knock sensor Idling
(See Page 05–163)
TC (E6 – 20) – E1 (E4 – 7) P–B – BR Terminal TC of DLC 3 IG switch ON 9 to 14
SIL (E6 – 18) – E1 (E4 – 7) L–R – BR Terminal SIL of DLC3 Connect hand–held tester to DLC3 Pulse generation
*1: A/T only

2004 COROLLA (RM1037U)

Author: Date: 181