Scribd
Upload
22 views

SIS Lab - Practical

The document discusses the safety lifecycle for Safety Instrumented Systems as defined by the IEC 61511 standard. It covers the key phases of the lifecycle including identification, design, testing, maintenance and management of change. The standard requires a performance-based approach and quantitative verification that safety targets are achieved.

Uploaded by

Hardik Bhadouriya
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
22 views

SIS Lab - Practical

The document discusses the safety lifecycle for Safety Instrumented Systems as defined by the IEC 61511 standard. It covers the key phases of the lifecycle including identification, design, testing, maintenance and management of change. The standard requires a performance-based approach and quantitative verification that safety targets are achieved.

Uploaded by

Hardik Bhadouriya
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

: Laboratory Manual:

Safety Instrumented System (3161709)

__________________________________________________________

Practical: 10
Aim: To study Safety Life Cycle.
Theory:

Here discussion is on how the SIS Safety Lifecycle as defined in the IEC 61511
standard. It also provides an overview of the SIS functional safety standard and the
regulations underpin their use and requirement.
It also includes a discussion of the safety lifecycle phases and practical steps in their
implementation.

Industry Standard for Safety Instrumented Systems (SIS)


International Electro-technical Commission (IEC), IEC 61511-2017, Functional
Safety: Safety Instrumented Systems for the Process Sector.

Localized Versions:
• US - Instrumentation, Systems, and Automation Society (ISA), ANSI/ISA
S84.00.01-2004, Functional Safety: Safety Instrumented Systems for the Process
Industry Sector, 2004.

IEC 61511 Standard Safety Lifecycle


Provide a complete safety lifecycle to address all root causes of failure.
• Identification of systems
• Design
• Testing
• Maintenance
• Management of Change

What does IEC 61511 require?


• Performance based
• Defines a “safety lifecycle”
• Requires selection of performance target for each SIF
• Requires the design each SIF to that target and quantitative verification of target
achievement.
: Laboratory Manual:
Safety Instrumented System (3161709)

__________________________________________________________

You might also like