Scribd
Upload
71 views

Daily Safety Check-List For The Passenger Hoists: Month: Date Site Name: Machine Sr. No.

This document provides a daily safety check-list for passenger hoists. It lists 27 parameters to check including noise and vibration, emergency buttons, brakes, limit switches, doors, lights, cleanliness, power levels, hand release systems, indicators, obstacles, and remote controls. Mechanics are to record check results daily and verify that all tolerances and dimensions are within acceptable limits per the operational manual. Safety instructions note to refer to the manual for details and to replace any parts observed outside acceptable limits.

Uploaded by

Avinash Mulik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
71 views

Daily Safety Check-List For The Passenger Hoists: Month: Date Site Name: Machine Sr. No.

This document provides a daily safety check-list for passenger hoists. It lists 27 parameters to check including noise and vibration, emergency buttons, brakes, limit switches, doors, lights, cleanliness, power levels, hand release systems, indicators, obstacles, and remote controls. Mechanics are to record check results daily and verify that all tolerances and dimensions are within acceptable limits per the operational manual. Safety instructions note to refer to the manual for details and to replace any parts observed outside acceptable limits.

Uploaded by

Avinash Mulik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

DAILY SAFETY CHECK-LIST FOR THE PASSENGER HOISTS

Site Name: Month:


Machine Sr. No.: DATE
Sr.
Activity Parameter Check Point / Value Record 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
No.
Check & correct for any abnormal
Tighten all loose parts and
1 Noise & Vibretion noise and vibration due to loose
made perfect
parts of lifts
Operate & Check, circuit should
Check for 'Emergency Push'
2 switch off after pressing Push Done found functioning
button
Button
Take lift up and Down in inching
Check the electromagnetic mode, Verify stopping
3 Checked & found functioning
brake functioning immediately after release of
button.
Check for water ingress into
4 No presence of water Observe no water
motor and electric control box

Check the function of limit check & reset if required, for up


5 Found Functioning
switches ,dn, door limit swich functioning
check visualy for functioning of
6 Check for clear barricade area Checked & found ok
sliding door and clear area.
Check the working of hooter
7 switch on & ckeck found Functioning
and light
Clean the lift and motor
8 clean Done
carriage
9 Record hour meter reading Record the reading Actual value
Check and record incoming
10 power supply voltage 400 volt Record the reading Actual value
+\- 5%
Check operation of hand Operate & Check hand release
11 release system (if not functioning Found Functioning
system
check EM brake U gap)
Checking of all power and limit
12 indicators R,Y,B & limit swiches Found Functioning
switch indicators
Checking and removing of any
observe clear path before
13 obstacles in the travel path of No obbsacles observed
operating
lift
Check performance and operate & check functioning of
14 Found Functioning
operation of remote pendent Up,Dn & immergency switches
stand on top of lift & insure
15 Anchoring Bracket Found Intact
fastners in position
stand on top of lift & insure
16 Cable guide alignment smooth travelling of cable. Also Found Functioning
check rubber strip.

Name & Sign. Of lift Operator Name Signature of the Engineer - P&M Signature of the Engineer - Electrical - Verified

Safety Instructions for Passenger Hoists:


Above points to be read with operational mannual for further detail.
All the tolerances and diamensions need to be varified as per the figures mentioned in Mannual
and to replced if observed beyond acceptable limits

You might also like