Link Agilia

Link+ Agilia

CC10342-0_BW_SPEC_SYS_data_sheet_Link_Link_Plus_Agilia_eng
DATA SHEET

Fresenius Kabi AG
61346 Bad Homburg
Germany
Phone: +49 (0) 61 72 686-0
Fax: +49 (0) 61 72 6882-39
www.fresenius-kabi.com
 Link Agilia & Link+ Agilia
Link Agilia and Link+ Agilia are compatible with Agilia IV Pumps and Large Volume Pumps from Fresenius Kabi.

DATA COMMUNICATION CONNECTOR BATTERY SPECIFICATIONS

 INFRARED (IR) CONNECTOR SPECIFICATIONS

Link+ Agilia
FUNCTION Backup battery for mains power failures and transport of the rack.
Link+ Agilia

FUNCTION Data communication with the Agilia IV infusion pumps. ACCESS Internal battery holder accessible with specific tools by qualified engineer.
MODE Wireless optical communication using infrared light. CHARACTERISTICS 7.2 V / 2.2 Ah - Lithium Ion rechargeable battery.
COMPATIBILITY Asynchronous Serial Infrared (SIR) physical layer irPHY 1.0, baseband no carrier. BATTERY AUTONOMY 1 H min.
TRANSPORT PROTOCOL Proprietary. SELF PROTECTIONS Over-current, over-discharge, over-voltage and overtemperature.
SPEED 115.2 kb/s max. BATTERY LIFE Preventive replacement after 3 years.
WAVELENGTH 880 nm to 900 nm infrared band with 45 nm spectral bandwidth.
EYES SAFETY < 500 mW/sr maximum intensity for class 1 of IEC/EN 60625-1 - January 2001.

 USB PC CONNECTOR SPECIFICATIONS

FUNCTION External PC connection for maintenance and configuration.
CONNECTOR External standard Mini B slave connector.
INDICATOR Blue LED.
DIMENSIONS - WEIGHT

Link Agilia & Link+ Agilia

OUTPUT POWER No power output available and remote host power not used. DIMENSIONS - WEIGHT Link 4: H/W/D 720 mm (28.35 in) x 184 mm (7.24 in) x 163 mm (6.42 in) - Weight 3,6 kg (7.94lb).
Link 6: H/W/D 1010 mm (39.76 in) x 184 mm (7.24 in) x 163 mm (6.42 in) - Weight 4.7 kg (10.36 lb).
COMPATIBILITY USB 2.0 OTG Slave role only. Link 8: H/W/D 1290 mm (50.79 in) x 184 mm (7.24 in) x 163mm (6.42 in) - Weight 5.8 kg (12.79lb).
INSULATION Not insulated from USB external device, but provides double insulation (4 kV) from mains.
Link 4+: H/W/D 720 mm (28.35 in) x 195 mm (7.68 in) x 163 mm (6.42 in) - Weight 4.1 kg (9.04 lb).
SPEED 480 Mb/s max. (theoretical). Link 6+: H/W/D 1010 mm (39.76 in) x 195 mm (7.68 in) x 163 mm (6.42 in) - Weight 5.2 kg (11.46 lb).
 RS232 SERIAL COMMUNICATION CONNECTOR SPECIFICATIONS Link 8+: H/W/D 1290 mm (50.79 in) x 195 mm (7.68 in) x 163 mm (6.42 in) - Weight 6.4 kg (14.11 lb).

FUNCTION System management, PC, PDMS, or maintenance connection. MAINS POWER INPUT SPECIFICATIONS
CONNECTOR ADAM TECH shielded circular female connector, 3 pins. FUNCTION Primary power source for Agilia power outlets and for internal electronics of Link Agilia and Link+.
INDICATOR Blue LED. CONNECTOR Standard appliance inlet IEC type C14 - male - 3 poles.
COMPATIBILITY RS232 levels, serial asynchronous, half duplex. POWER SUPPLY 100 V to 240 V AC / 50 - 60 Hz.
INSULATION 1.5 kV insulation from external system + provides double insulation (4 kV) from mains.
MAXIMUM POWER Link 4: 60 VA.
SPEED 115.2 kb/s max. (theoretical). (with pumps) Link 6: 90 VA.
 WIRED NETWORK CONNECTOR SPECIFICATIONS Link 8: 120 VA.
FUNCTION System management, PC, or maintenance connection. Link 4+: 75 VA.
CONNECTOR RJ45 8 pins. Link 6+: 105 VA.
Link 8+: 135 VA.
INDICATOR Blue LED.
COMPATIBILITY IEEE 802.3 Ethernet 10baseT or fast Ethernet 100baseT, twisted pairs, Full duplex. PROTECTIVE FUSES 2 fuses, 2 A timed with high breaking capacity - T 2A H 250 V.
Fuseholder is externally accessible on mains power inlet connector.
INSULATION 1.5 kV insulation from external system + provides double insulation (4 kV) from mains.
SPEED Automatic speed selection 10 Mb/s or 100 Mb/s (theoretical). ELECTRIC PROTECTION Class I with protective earth, with 3-wire power cord.

 NURSE CALL CONNECTOR SPECIFICATIONS AGILIA PUMP POWER OUTPUT SPECIFICATIONS

FUNCTION External alarm NURSE CALL signaling. FUNCTION Power source output for Agilia IV infusion pumps.
CONNECTOR Stereo JACK 3.5 mm connector. CONNECTOR Standard line outlet IEC type C13 - female - 3 poles.
INDICATOR RED LED. POWER SUPPLY 100 V to 240 V AC / 50 - 60 Hz.
COMPATIBILITY Relay, dry contacts stand-off / work contact - positive / negative polarity option. MAXIMUM POWER 15 VA per outlet.
CONTACTS DC 24 V / 2 A max or AC 48 V / 1 A max.
PROTECTIVE FUSES Report to mains power input fuses.
INSULATION 1.5 kV insulation from external system + provides double insulation (4 kV) from mains.
ON / OFF POWER No power on empty position - Earth pole is functional earth only.
CENTRAL PROCESSING UNIT (CPU) SPECIFICATIONS
MECHANICAL SPECIFICATIONS FOR LOCKING CLAMPS
FUNCTION Data processing and communications.
POLE Diameter: from 16 to 42 mm
PROCESSOR 32 bits, 400 MHz.
CENTRAL MEMORY 64 Mbytes, high speed RAM 266 MHz. RAIL Height: from 16 to 42 mm / Depth: 30 mm max.
FLASH MEMORY Non volatile 256 Mbytes. COMPLIANCE WITH STANDARDS
OPERATING SYSTEM Safety and flexible multitasking / multithreading operating system with GPL license. Complies with the 93/42/CEE Medical directive
USER INTERFACE SPECIFICATIONS
SAFETY OF Complies with EN/IEC 60601-1.
PUMP CENTRALIZATION Function: displays infusion pump alarms and pre-alarms. ELECTROMEDICAL IP22 protection against dust and splashing liquid.
DISPLAY Size: 70 mm x 30 mm - Type: LED - Viewing angle: 360° @ 4 meters. EQUIPMENTS Protection against leakage current; type B applied part.
Color: RED (pump alarms - high priority) / YELLOW (pump pre-alarms - Medium and low priority) / Class I with protective earth.
RED and YELLOW (maintenance mode). Agilia power outlets are wired on internal functional earth to reduce residual current that
MAIN STATUS INDICATOR Function: displays main connected status - Type: LED - Color: GREEN. may disturb ECG or EEG devices.
BATTERY STATUS INDICATOR Function: displays Link+ battery status and alarm - Type: LED - Color: GREEN / YELLOW / RED.
EMC (electromagnetic Complies with EN/IEC 60601-1-2.
SYSTEM STATUS INDICATOR Function: displays Link+ internal software status -Type: LED - Color: GREEN / YELLOW / RED.
compatibility)
RESET BUTTON Function: reboots Link+ internal software - Type: protected push button.