Scribd
Upload
39 views

Assignment 1 Advance Analysis

1. The document is an assignment from the School of Mechanical and Civil Engineering at MITAOE containing 5 questions related to fluid mechanics and aerodynamics. 2. The questions cover topics like calculating the lift area of an aircraft, drag force on an automobile, pressure drop and viscosity in fluid flow through a tube, and power required for laminar flow between parallel plates. 3. The assignment provides the question, relevant parameters, and rubric for scoring the questions which are out of 2 marks each.

Uploaded by

Paras kapoor
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
39 views

Assignment 1 Advance Analysis

1. The document is an assignment from the School of Mechanical and Civil Engineering at MITAOE containing 5 questions related to fluid mechanics and aerodynamics. 2. The questions cover topics like calculating the lift area of an aircraft, drag force on an automobile, pressure drop and viscosity in fluid flow through a tube, and power required for laminar flow between parallel plates. 3. The assignment provides the question, relevant parameters, and rubric for scoring the questions which are out of 2 marks each.

Uploaded by

Paras kapoor
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Format No.: MITAOE/ACAD/INST/18/A Rev.No.: 1.1 Rev.

Date:02/01/2020

ASSIGNMENT
( An Autonomous Institute Affiliated to SPPU) ACADEMIC YEAR 2020-21 Sem II
Alandi (D), Pune – 412105 SEM VIII
CLASS &
SCHOOL OF MECHANICAL& CIVIL ENGG. Final Year BTECH
DIVISION

COURSE ASSIGNMENT NO. 1


Advanced Analysis

COURSE
RSJ DATE 10/04/2021
INSTRUCTOR

Que. CO BT
Question Description Marks
No. No. Level
An aircraft is flying in level flight at a speed of
200 km/hr through air (density, = 1.2 kg/m2 , and
viscosity = 1.6 x 10-5 N-s/m2). The lift co-efficient at this
1 2 3 3
speed is 0.4 and the drag co- efficient is 0.0065. The
mass of the aircraft is 800 kg. The effective lift area of
the aircraft is ?
A thin flat plate 0.5 m x 0.7 m in size settles in a
large tank of water with a terminal velocity of
0.12 m/s. The co-efficient of drag Cd= 1.328/√Re for a
2 laminar boundary layer and Cd= 0.0172/ Re^(1/5) for a 2 4 2
turbulent boundary layer, where Re is the plate
Reynolds number. Assume viscosity = 10e-3 N-s/m2
and density= 1000 kg/m3. The submerged weight of the
plate is ?

Flow rate of a fluid (density = 1200 kg/m^3 ) in a small


diameter tube is 780 mm^3/s. The length and the
3 diameter of the tube are 2 m and 0.5 mm, respectively. 2 2 3
The pressure drop in 2 m length is equal to 2.0 MPa.
The viscosity of the fluid is ?

An automobile with projected area 2.6m2 is running


on a road with speed of 120 km per hour. The mass
density and the kinematic viscosity of air are 1.2 kg/m3
4 2 1 2
and 1.5 x 10-5m 2 /s, respectively. The drag coefficient
is 0.30 The drag force on the automobile and the metric
horse power required to overcome the drag force are ?

5 The laminar flow takes place between closely spaced 2 3 3


parallel plates. The velocity profile is given by u =y/h .
The gap height, h, is 5 mm and the space is filled with
oil (specific gravity = 0.86, viscosity m = 2 × 10-4

1
Format No.: MITAOE/ACAD/INST/18/A Rev.No.: 1.1 Rev.Date:02/01/2020

N-s/m2 ). The bottom plate is stationary and the top


plate moves with a steady velocity of V=5 cm/s. The
area of the plate is 0.25m2 . The power required to keep
the plate in steady motion is ?

Rubrics:_
Que. Unsatisfactory/
Correct Answer Incomplete Answer Marks
No. Incorrect Answer

1 2 1.5 0-1 2

2 2 1.5 0-1 2

3 2 1.5 0-1 2

4 2 1.5 0-1 2

5 2 1.5 0-1 2

Course Instructor
Sign with Date

You might also like