Scribd
Upload
91 views

ITC Limited - Paperboards and Specialty Papers Division: Specification Sheet

This document provides the specifications for three grades of pharma print paper - 30 GSM, 40 GSM, and 45 GSM. It lists the parameters, units of measurement, and acceptable ranges for each grade for substance, thickness, porosity, tensile strength, stiffness, opacity, brightness, roughness, water cobb, ash, wax pick, loading, shade, and formation. Acceptable ranges are provided for each parameter based on internal work instructions and international standards.

Uploaded by

Apoorva Pattnaik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
91 views

ITC Limited - Paperboards and Specialty Papers Division: Specification Sheet

This document provides the specifications for three grades of pharma print paper - 30 GSM, 40 GSM, and 45 GSM. It lists the parameters, units of measurement, and acceptable ranges for each grade for substance, thickness, porosity, tensile strength, stiffness, opacity, brightness, roughness, water cobb, ash, wax pick, loading, shade, and formation. Acceptable ranges are provided for each parameter based on internal work instructions and international standards.

Uploaded by

Apoorva Pattnaik
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

ITC Limited - Paperboards and Specialty Papers Division

Unit: TRIBENI

Specification Sheet

GRADE NAME : PHARMA PRINT SPEC NO: Qpln/QA-FP(PM3)/8.20/001


FORMAT NO: Fmt/Technical/01

PARAMETERS UNIT 30 GSM 40 GSM 45 GSM


Substance
g/m2 30 ± 1.5 40 ± 2 45 ± 2.5
WI/QA-FP/8.2/01, TAPPI 410
Thickness
µm 35 ± 3 50 ± 3 55 ± 3
WI/QA-FP/8.2/03, ISO 534
Porosity BAT
ml/min 150 ± 50 140 ± 30 140 ± 30
WI/QA-FP/8.2/06,
Tensile MD
kg/cm 1.4 (min) 1.4 (min) 1.5 (min)
WI/QA-FP/8.2/11, ISO 1924
Stiffness (MD)
No 8±3 15 ± 3 15 ± 3
WI/QA-FP/8.2/21,
ISO Opacity
% 70 (min) 74 (min) 76 (min)
WI/QA-FP/8.2/32, ISO 2471
Brightness ISO
% 85 (min) 90 (min) 90 (min)
WI/QA-FP/8.2/33, ISO 2470
Roughness Top ml/min 70 ± 20 70 ± 20 70 ± 20
Roughness Wire
ml/min 100 ± 20 100 ± 20 100 ± 20
WI/QA-FP/8.2/15, ISO 8791
Water cobb
g/m2 18 ± 3 25 ± 3 25 ± 3
WI/QA-FP/8.2/18, TAPPI 441
Ash
% 10 ± 3 15 ± 3 15 ± 3
WI/QA-FP/8.2/31, TAPPI 413
Wax Pick Top No 13 (min) 14 (min) 14 (min)
Wax Pick Wire
No 13 (min) 14 (min) 14 (min)
WI/QA-FP/8.2/30,
Loading
% 13 ± 3 13 ± 3 13 ± 3
WI/QA-FP/8.2/08,
Shade - As per Standard
Formation - As per Standard

You might also like