Tech Guide-Eng
Tech Guide-Eng
www.adphc.gov.ae
Table of Contents
1- Introduction..........................................................................02
2- Risk Management................................................................02
4- Set a Procedure....................................................................05
6- Common Issues....................................................................11
7- References............................................................................19
• Although the United Arab Emirates is generally blessed with a stable climate
and abundant sunshine, there are still times when adverse weather conditions
can add to the risks that are associated with work and the workplace. These
risks emanate from a variety of weather conditions such as heavy rainfall, fog,
dust / sand storms, lightning strikes, or high winds.
• As with all the risks, it is vital that employers ensure that adverse weather
hazards are considered within the risk management program and to ensure
that control measures be developed in order to mitigate any potential risks
facing their employees and all individuals who may be impacted at the
workplace. This document aims to provide advice and guidance for employers
and employees on the risks associated with adverse weather that may impact
the activities and employees at the workplace and to provide information on
the control measures that can be considered in in order to mitigate these risks.
2- Risk Management
02
Weather
Hazard Possible controls
Conditions
Vehicle speed to be reduced, keeping a longer
Reduced visibility gap from the vehicle in front
on roads may lead Fog lights to be used
to vehicle collisions Vehicle to be driven using dipped headlights
If visibility becomes very poor, driver to pull
Fog over in a safe place until it improves
Reduced visibility Use of high visibility clothing
of pedestrians Warning alarms (audio and visual) for plant
and equipment
Reduced visibility Windscreen wipers to be kept in good condition
and increased Vehicle speed to be reduced, with at least a
stopping four-second gap (see note) from the vehicle in
distances may lead front
Lights to be used if visibility is poor
to vehicle collisions
Screen heater to be used to prevent misting
Slippery surfaces
caused by heavy Appropriate signage provided
rainfall (entrances to Good housekeeping in place
Rain offices, hotels, retail Non-slip rugs or mats provided at entrance
etc)
Flooding/ unstable
structures Regular inspections
(construction sites) Equipment secured
due to heavy rain Stop the work
and/or wash out of Clear surrounding areas
sand
Regular checks and maintenance
High risk items including scaffolding structures,
Objects overturned
heavy cranes etc. removed or secured during
Objects blown loose
extreme high wind
from fittings Follow manufacturer,s instructions
Stop the work in high winds
Vehicle speed to be reduced, maintaining a
High winds may lead steady course
Wind/ to driver losing Drivers to keep a safe distance from other
Sandstorms control of the vehicles
vehicle. Drivers to avoid overtaking, especially
high-sided vehicles and very small vehicles
Consider postponing any driving
Vehicle to be driven using dipped headlights
If visibility becomes very poor, driver to pull
Reduced visibility
over in a safe place until it improves
due to sandstorms
Warning alarms (audio and visual) for plant and
equipment
Use of high visibility clothing
03
• The table above provides only a few examples of the hazards that can be
present due to adverse weather, these can change dependent on the industry
and activities which are being undertaken. For example the construction
industry will be affected a lot more by adverse weather than an office complex.
• Employers should ensure they have considered adverse weather within
their risk management program, otherwise this should be reviewed and any
foreseeable adverse weather events included in the program. Go through all
the documented risk assessments for the workplace and ask how these could
be affected by adverse weather.
• Detailed guidance on how to undertake a risk assessment is available within
OSHAD-SF - TG – The Process of Risk Management.
04
4- Set a Procedure
• As an employer, consider developing a procedure for managing adverse
weather conditions, this will help to set the standard on how to manage these
issues and also take away any uncertainty for employees if they are caught up
in adverse weather conditions.
• Through the risk management program, employers will already have identified
risks that are most likely to affect their undertakings. Review the identified
risks and look at developing procedures to reduce the risk.
• These procedures can be very simple documents that provide guidelines and
standards that are to be followed during times of adverse weather.
• A crucial element when setting any procedure is to develop clear roles and
responsibilities for employees within the organization. These will differ
within entities however below are some key requirements that will need to be
considered and assigned in relation to risk management for adverse weather
conditions:
- defining internal requirements for managing adverse
weather program;
- assigning authority levels for decision making throughout
the organization;
- responsibility for monitoring weather reports;
- escalation process throughout the organization;
- training and awareness for employees within the
organization; and
- communication with employees following an adverse
weather alert.
• OSHAD-SF - Element 1 – Roles, Responsibilities and Self-Regulation includes
detailed requirements that all entities must consider when discussing roles
and responsibilities.
• Further guidance is also available within OSHAD-SF - GD – OSH Roles and
Responsibilities.
• When developing a procedure also consider other persons that may be affected
within your workplace, such as contractors, visitors or members of the public.
05
4-2 Authority Levels
OSH Director R R R R R
Project
Director/ C C R R R
Manager
06
4-3 Employees
Version 3.0 07
4-4 Provide clear instructions
• Within the procedure set clear instructions for each type of weather condition,
this will help reduce confusion and conjecture when adverse weather is a
hazard.
• As an example, if you state within the procedure that staff should not drive
during heavy rainfall, this statement is open to interpretation as heavy rainfall
will mean something different to people from different countries or cultures. A
more precise way of stating this could be that employees will not drive during
heavy rainfall which has reduced visibility and / or has created flooding on the
roads.
• Information around adverse weather conditions is available from Abu Dhabi
Police GHQ (General Headquarter) and the National Centre of Meteorology and
Seismology website. Refer to section 5 for information on monitoring weather
alerts.
• Develop clear guidelines for each adverse weather condition; this will assist
responsible staff when deciding if alerts need to be sent out to all employees.
• Table Three below has some information that can be used when deciding what
the risk levels are for different types of adverse weather.
Strong wind
Light winds Moderate wind
(gusts over 50
(average speed (gusts over 38 km/h
km/h to 75 Very strong
No 15 km/h – gust up to 49 km/h( and/
km/h) and / or winds (gusts
Sandstorms up to 37 km/h) or Sandstorms)
sandstorms over 75 km/h)
Sandstorms / and winds, or and / or Could drive short
Visibility of less and / or
Wind expectations Sandstorms distances (no
than 100 meters Sandstorms)
of occurrence Could drive motorway) with
Major impact on Visibility of less
with caution caution
outdoor than 30 meters.
Minor impact Moderate impact on
activities and
on workplaces outdoor activities
buildings
08
Weather Weather Severity Level
Condition
Minor Moderate Major Catastrophic
Version 3.0 09
• Table Four below shows some of the measures that you should consider during pre-
storm preparation or during adverse weather conditions.
Weather Possible actions for Severity Levels
Condition Minor Moderate Major Catastrophic
Employees living long
Monitor distances advised to All employees informed
to delay travel to office
Fog conditions travel later.
Non-essential driving/ location
on an hourly
visits cancelled All external driving /
basis
Outdoor activities visits cancelled
reviewed for safety All outdoor activities
Projects/ reviewed
buildings Projects/ buildings
Sandstorms / On-going Work at height All external
inspected to inspected to ensure all
Wind Daily stopped. work
ensure all items secured/ tied down.
Monitoring Non slip matting provided Projects/ buildings stopped
items inspected to ensure all
at entrances/ exits to
secured/ items secured/ tied
buildings
tied down down.
Outdoor electrical works
reviewed to ensure Review of travel
Rain/
Close all safety requirements for
Flooding
windows Lifting operations employees that need
(external) stopped to return home
10
5- Monitoring Weather Alerts
• At the present time, several applications for monitoring the weather are available
in the marketplace. These applications range from available government websites
to smart mobile phones where information can be accessed in real-time.
• It is recommended that the following website is used to gather data and monitor
weather conditions in the Emirate of Abu Dhabi:
National Centre of Meteorology and Seismology - http://www.ncms.ae/en
• Within this website, comprehensive data can be found on all weather conditions
within the UAE, further alerts are also issued by the Abu Dhabi Police GCHQ.
• As part of the procedure, assign responsibility for monitoring alerts and
weather conditions to a member of staff, regular checks should be undertaken
and the information recorded and where required disseminated throughout the
organization.
6- Common Issues
• Risk assessments will identify the risks and subsequent controls measures that are
required for the workplace, however below is a list of some of the more common
issues that may be encountered during times of adverse weather and should be
considered by employers as part of their procedure.
11
6-1-1 General
• Issue alerts to all employees in affected areas.
• Issue alerts to all projects in affected areas.
• Consider using only critical electrical equipment during lightning storms, switch off
non-essential equipment.
• Inform employees to stay indoors.
• Ensure entrances and exits to buildings are safe and have non slip mats to prevent
ingress of water.
• Provide additional cleaning staff at entrance and exit points to buildings where
slips and trips could be a risk due to slippery surfaces caused by rainfall.
• Avoid plumbing, including sinks, baths and faucets.
• Ensure employees are aware to:
- Never lie flat on the ground;
- Never shelter under an isolated tree or metal structure;
- Immediately get out and away from ponds, and other bodies of
water; and
- Stay away from objects that conduct electricity (barbed wire fences,
power lines, etc.).
6-1-2 Driving
• Ensure employees are aware of the need to:
12
6-1-3 Construction
• Ensure appropriate signage is in place.
• Review the use of electrical installations or plant and equipment during heavy
rainfall.
• Review any activities that involve excavations.
• Undertake additional checks of any scaffolding, ladder, heavy equipment etc. that
may become unsafe due to heavy rainfall.
• Review the need to undertake outdoor work during heavy rainfall.
• Provide staff with appropriate wet weather clothing if working outdoors.
• Stop work outdoors during electrical (lightning) storms.
• Ensure any chemicals or hazardous materials are secured and covered.
• Check temporary roads and pathways to ensure they are safe for use.
• Check any areas where work at height may be undertaken and ensure it is safe to
do so.
• Ensure employees are aware of:
- The risks of areas with standing water or that may flood; and
- The need to immediately get off elevated areas such as working
platform, scaffolding, etc during lightning storms.
13
6-2 High Winds
• High winds can be a common issue within the UAE, with speeds known to
reach over 100km/h gusts and with recorded sustained winds at 50km/h.
• One of the main risks from strong winds will be to people and loose material
which is at a height, as it is more likely to be exposed and therefore more
susceptible to high winds. Cranes and towers are particularly at risk and could
be toppled due to high wind if not secured correctly. People working at height
can be blown to the side, increasing the chances of them falling if there is
insufficient side protection to stop them from falling. If the wind is strong,
there can be a risk of materials such as roof tiles and fast-moving debris
striking a person. Also, the wind can whip up dust and sand which can damage
or irritate eyes, as well as aggravating conditions such as asthma.
• Strong winds can also make it difficult to hear properly, so much so that
workers may be oblivious to approaching vehicles if they cannot hear them
coming.
14
6-2-1 General
- Review any work at height and outdoor working when the wind speed
reaches or gusts higher than 38km/h to ensure it is safe to continue.
This review should be based on a risk assessment considering the cur-
rent and anticipated wind speed, weather conditions, altitude of work
being undertaken and any other conditions (hazards) that may affect
the safety and health of those undertaking the work or affected by the
works.
- Issue alerts to employees.
- Undertake inspections of buildings and projects to ensure any loose ma-
terial removed and items are secured.
- Ensure all windows are closed and doors only opened as required (high
winds can easily cause door to break off their hinges).
- Remove lightweight or loose objects from open areas.
- Stop any lifting operations if wind speed reaches or gusts higher than
38km/h.
- Ensure any cranes or lifting equipment is secured.
6-2-2 Driving
• Ensure employees are aware of the need to:
- Only drive if safe to do so;
- Postpone their journey if not essential until the heavy wind subsides;
- Not to drive in high sided vehicles;
- Reduce their speed;
- Ensure tires and windscreen wipers are in good condition;
- Not drive close to other cars, and increase the braking distance; and
- Pull over in a safe place if visibility becomes very poor, until it improves.
15
6-2-3 Construction
• Review any work at height and outdoor working when the wind speed reaches
or gusts higher than 38km/h to ensure it is safe to continue. This review should
be based on a risk assessment considering the current and anticipated wind
speed, weather conditions, altitude of work being undertaken and any other
conditions (hazards) that may affect the safety and health of those undertaking
the work or affected by the works.
• Ensure that tools are packed away safely and that roofing sheets, cones,
signage and other loose materials are safely secured.
• Ensure temporary or site fencing is securely fixed.
• Ensure any chemicals or hazardous materials are secured and covered.
• Use extreme caution when picking up large sections of plywood or similar flat
materials, as these can act as a sail.
• Ensure employees are aware of the need to:
- Use tag lines when hoisting loads with large flat surfaces;
- Wear protective gear against falls;
- Not stand near stacks of materials and structures;
- Wear eye protection to keep dust, debris and other foreign particles from
blowing into their eyes; and
- Ensure hard hats are securely fastened and cannot be blown off their head.
16
6-3 Fog
• Fog also causes very hazardous conditions for driving on public roads due to
reduced visibility.
17
6-3-1 General
- Issue alerts to all staff; and
- Review the need to travel.
6-3-2 Driving
• Ensure employees are aware of the need to:
- Consider the need to drive during heavy / dense fog;
- Reduce speeds;
- Not use hazard lights;
- If visibility is less than 100metres use high intensity fog lamps;
- Not tailgate and maintain a gap of at least 4 seconds with the car in front (refer
to note under section 2);
- Be patient, it is better to arrive late than not to arrive at all;
- Beware of drifting fog, density can change quickly, dramatically reducing
visibility; and
- Pull over in a safe place if visibility becomes very poor, until it improves.
6-3-3 Construction
- Employees should wear appropriate high visibility clothing;
- Review heavy lifting activities considering the visibility conditions; and
- Audible and visual warnings activated on plant and equipment.
18
7- References
• OSHAD-SF
Element 1 - Roles, Responsibilities and Self-Regulation
• OSHAD-SF
Element 2 – Risk Management
• OSHAD-SF
Element 4 – Communication and Consultation
• OSHAD-SF
Element 5 – Training, Awareness and Competency
• OSHAD-SF
Element 6 – Emergency Management
• OSHAD-SF
Element 7 – Monitoring, Investigation and Reporting
• OSHAD-SF
Element 9 – Compliance and Management Review
• OSHAD-SF
Mechanism 6.0 – OSH Performance Monitoring and Reporting
• OSHAD-SF
Mechanism 11.0 – Incident Notification, Investigation and Reporting
• General Secretariat of the Executive Council Circular No. (1) Of 2016
concerning the Road Traffic Safety of the Employees in Bad Weather
Condition and Poor Visibility, 28 January 2016.
19
www.adphc.gov.ae