855D/L855D FELLER BUNCHER

THE 855D
THE TIGERCAT Well matched to a wide variety
855D IS A HIGH of large volume applications from
high-cycle plantations to large
PERFORMANCE, FUEL diameter timber stands.

EFFICIENT FELLER
BUNCHER.
The Tigercat FPT powered 855D series feller
THE L855D
bunchers are extremely efficient and well
Equipped with Tigercat’s leveling
suited to disc saw and shear felling heads as system, the L855D is an excellent
well as the Tigercat 5185 fixed felling saw. choice for steep slopes and big
timber.
 POWER AND ACCESS

CLAMSHELL STYLE RETRACTING ROOF ENCLOSURE AND

NEAT, COMPARTMENTALIZED COMPONENT ARRANGEMENT.
Large swing-out doors for clear access to both sides of the
engine and all daily service points. Hydraulic components are
compartmentalized, separating the engine from the hydraulic
pumps and valves.

EFFICIENT HIGH CAPACITY COOLING SYSTEM

Automatic variable fan speed for improved fuel efficiency
and automatic reversing cycle to clean the heat exchangers.

T I G E R C AT F P T E N G I N E T E C H N O L O G Y
Tigercat FPT Tier 2 and Tier 4f engines offer quick load response, low
operating costs and high power density, combined with excellent fuel
economy.
The second-generation common rail fuel injection system provides top
performance in the most demanding applications.
Tigercat FPT Tier 4f emission technology is simple and reliable. The Tier
4f configuration meets emission standards without complex add-on
components. The key is the patented selective catalyst reduction (SCR)
after-treatment system.
Tigercat FPT engines offer improved reliability and lower long-term
maintenance costs – the clear power choice for forestry and off-road
industrial applications.
EXTREME DUTY LEVELING SYSTEM
Field proven, millions of hours of operation. Long frames and wide stance for excellent stability. Thick steel plate, massive
cylinders and tapered roller bearings. Unique patented geometry improves machine stability on sloping terrain.

TWIN SWING DRIVES

Powerful swing torque and reduced pinion loads for extended swing system life.

HIGH SPEED, H I G H P ER F OR M AN C E , HI G H E F F I C I E N C Y.
Tigercat’s patented ER® technology allows the machine operator to extend and retract the boom on a
horizontal plane smoothly and quickly using a single joystick. But the benefit goes beyond reducing
operator fatigue.
Key to ER technology is reduced energy consumption. The ER system transfers energy back and forth
between the main and the stick boom functions, reducing the total energy required to move the boom
system. This reduces demands for power, pump flow and system cooling. The result is increased
productivity and reduced fuel consumption per unit of production.

ER improves efficiency and

productivity, especially in
high-cycle plantation felling
applications.
 F E L L I N G

E F F I C I E N C Y A N D V E R S AT I L I T Y
Equipped with ER and Tigercat FPT power, the 855D series feller bunchers are highly efficient and productive. The 855D series is also versatile.
Equipped with a Tigercat bunching saw or shear, the 855D is a force in small diameter, high-cycle plantations. In mature timber, the 855D can
be matched to the 5702 felling saw. In oversize timber and steep slope applications, the 5185 fixed felling saw handles large diameter wood
and can do double duty – shovelling timber to better ground.

FOR FELLING SMALL DIAMETER TIMBER

5 0 0 0 B U N C H I N G S AW 2000 BUNCHING SHEAR

Ideal in high-cycle plantations. Tigercat bunching heads reduce The 855D mated to a Tigercat bunching shear is a very fuel
machine travel, maximize the number of trees per swing cycle and efficient solution for plantation pulpwood applications.
optimize skidder bunches for a more efficient operation.

FOR FELLING LARGE DIAMETER TIMBER

5 7 0 2 B U N C H I N G S AW 5 1 8 5 F I X E D F E L L I N G S AW
The most efficient head for large diameter timber and mixed natural For oversized timber and steep terrain with added flexibility for
stands under 580 mm (23 in) in diameter. bucking, topping, prebunching and shovel logging.
 S P E C I F I C AT I O N S

855D L855D
D I M E N S I O N S WITH STANDARD TRACK SHOE
WIDTH 3 380 mm (133 in) 3 430 mm (135 in)
LENGTH less boom 5 380 mm (212 in) 5280 mm (208 in)
HEIGHT less skylight 3 290 mm (130 in) 3 710 mm (146 in)
GROUND CLEARANCE 710 mm (28 in) 710 mm (28 in)
WEIGHT less attachment 27 600 kg (60,900 lb) 36 500 kg (80,490 lb)
TAIL SWING over side 1 385 mm (54 in) 1 360 mm (54 in)
POWER
ENGINE Tier 4f Tigercat FPT N67 Tier 4f Tigercat FPT N67 Tier 4f
RATED 210 kW (282 hp) @ 2,200 rpm 210 kW (282 hp) @ 2,200 rpm
PEAK 210 kW (282 hp) @ 2,200 rpm 210 kW (282 hp) @ 2,200 rpm
ENGINE Tier 2 Tigercat FPT N67 Tier 2 Tigercat FPT N67 Tier 2
RATED 205 kW (275 hp) @ 2,100 rpm 205 kW (275 hp) @ 2,100 rpm
PEAK 210 kW (282 hp) @ 2,000 rpm 210 kW (282 hp) @ 2,000 rpm
AIR FILTRATION Precleaner and 2-stage engine air cleaner Precleaner and 2-stage engine air cleaner
COOLING Aluminum side by side radiator, oil cooler and charge air cooler Aluminum side by side radiator, oil cooler and charge air cooler
Removable intake debris screen Removable intake debris screen
FAN Hydraulically driven, automatic variable speed, reversible Hydraulically driven, automatic variable speed, reversible
FUEL CAPACITY 800 L (211 US gal) 800 L (211 US gal)
DEF CAPACITY 80 L (21 US gal) 80 L (21 US gal)
HYDRAULIC SYSTEM
PUMP, MAIN Piston Piston
PUMP, SAW* Piston Piston
PUMP, CLAMP ARMS Piston Piston
PUMP, COOLING FAN Piston Piston
RESERVOIR 225 L (60 US gal) 225 L (60 US gal)
FILTRATION (5) Spin-on, 7 micron full flow; (1) Water absorbing (5) Spin-on, 7 micron full flow; (1) Water absorbing
CYLINDERS, HOIST (2) 120 mm (4.7 in) bore (2) 120 mm (4.7 in) bore
CYLINDERS, STICK/ER (2) 120 mm (4.7 in) bore (2) 120 mm (4.7 in) bore
CYLINDER, TILT 130 mm (5.2 in) bore 130 mm (5.2 in) bore
CYLINDERS, LEVELING N/A (2) 180 mm (7 in) bore
HORSE POWER CONTROL Electronic speed sensing; All-speed antistall Electronic speed sensing; All-speed antistall
UNDERCARRIAGE
TRACK FRAMES R6-152 heavy-duty forestry R7-163L super-duty forestry leveling
Integral track guides/ramp angles Integral track guides/ramp angles
TRACK CHAIN F8 203 mm (8 in) pitch sealed and greased FH400 215 mm (8.5 in) pitch sealed and greased
FINAL DRIVE (2) piston motors with brake valves; Infinitely variable speed (2) piston motors with brake valves; Infinitely variable speed
TRACTIVE EFFORT 277 kN (62,300 lbf) 367 kN (82,600 lbf)
GEARBOX Triple reduction planetary type with brake Triple reduction planetary type with brake
FRONT IDLER Hydraulic track adjuster; Spring shock absorber Hydraulic track adjuster; Spring shock absorber
ROLLERS, UPPER (2) D6D excavator type N/A
SLIDES, UPPER Optional, bolt-on Bolt-on
ROLLERS, LOWER (9) D6 single/double flange tractor type (10) FH400 excavator type
TRACK SHOE 610 mm (24 in) single/double grouser 610 mm (24 in) single grouser
Optional  10 mm (28 in) single grouser tri-track
7 710 mm (28 in) single grouser
760 mm (30 in) double grouser tri-track
915 mm (36 in) triple grouser tri-track
LEVELING N/A 20° forward; 7° rear; +/-15° side
MAXIMUM CUT RADIUS 8 460 mm (333 in) 8 460 mm (333 in)
MINIMUM CUT RADIUS 4 800 mm (189 in) 4 800 mm (189 in)
BARE PIN LIFT full reach 8 440 kg (18,600 lb) 8 440 kg (18,600 lb)
BRAKES
TRACK Friction disc; Automatic spring applied, hydraulic release Friction disc; Automatic spring applied, hydraulic release
SWING Friction disc; Manual spring applied, hydraulic release Friction disc; Manual spring applied, hydraulic release

* For disc saw felling attachments only.

 855D L855D
R O TAT I N G U P P E R
SWING DRIVE 8 rpm variable speed; 360° continuous rotation; Double reduction, twin swing drive planetary gearboxes; Twin piston swing motors
SWING BEARING 1 190 mm (47 in) ball circle diameter
ENCLOSURE Perforated plate on doors for ventilation; Hydraulic operated engine enclosure with manual back-up; Vandal protection; Smooth exterior
Rear air intake for cooling
ELECTRICAL
BATTERY (2) AGM, 12 v (2) AGM, 12 v
ALTERNATOR 110 amp, 24 v 110 amp, 24 v
SYSTEM VOLTAGE 24 v 24 v
LIGHTING (7) HID, (3) LED; (5) LED service lights (7) HID, (3) LED; (5) LED service lights
O P E R AT O R ’ S S TAT I O N
CAB Insulated, pressurized and isolation mounted; A/C, heater, defroster with side-mount controls
Full length polycarbonate windshield/entry door; Polycarbonate right-side and rear windows
One-piece polycarbonate side door window with steel guarded tempered glass upper sliding section for ventilation
Skylight or flat hatch; AM/FM digital stereo with CD player and Bluetooth® audio; (2) power points
CONTROLS Hydraulic proportional for boom/travel/swing/tilt with electronic travel speed control limiter
Electronic for clamp/accumulating arms/wrist/leveling; Electric switch for swing brake and ER
Electronic control system with colour LCD display screen for machine monitoring and function adjustment
SEAT Full suspension air ride, fully adjustable, angled mounting; Armrest mounted Tigercat joysticks
O T H E R S TA N D A R D E Q U I P M E N T

Fuel suction strainer; Alarm for track movement Fuel suction strainer; Alarm for track movement
OPTION A L EQUI P M EN T
Counterweight kit; Cold weather kit; Bolt-on tool box Cold weather kit
R7-150-2 undercarriage Bolt-on tool box
FELLING HEAD
Flexible hydraulic system to accept various felling heads Flexible hydraulic system to accept various felling heads

ALL ENGINE POWER VALUES ARE QUOTED AT NET POWER, AS PER SAE J1349
TIGERCAT RESERVES THE RIGHT TO AMEND THESE SPECIFICATIONS AT ANY TIME WITHOUT NOTICE

855D FELLER BUNCHER L855D FELLER BUNCHER

3,30 m 3,71 m
(10 ft 10 in) (12 ft 2 in)

8,46 m (27 ft 9 in)

5,38 m (17 ft 8 in)
8,46 m (27 ft 9 in)
5,28 m (17 ft 4 in)
855D/L855D 1.0 0117

EMAIL [email protected] © 2001 - 2017 Tigercat International Inc. All Rights Reserved. TIGERCAT, WIDERANGE, TURNAROUND,
ER, EHS, LOW-WIDE and TEC, their respective logos, TOUGH RELIABLE PRODUCTIVE, TIGERCAT
PHONE 519. 753.2000
TV, “Tigercat Orange” and BETWEEN THE BRANCHES, as well as corporate and product identity,
WEBSITE www.tigercat.com are trademarks of Tigercat International Inc., and may not be used without permission. TIGERCAT,
ADDRESS 54 Morton Ave. East, Brantford, Ontario Canada, N3R 7J7 TURNAROUND, WIDERANGE, EHS and ER, and their respective logos are registered trademarks of
MAIL Box 637 N3T 5P9 Tigercat International Inc.