Osaka Vacuum, Ltd.

Air-cooled Type Dry Vacuum pump

DSP NEO Series

The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.
 Osaka Vacuum, Ltd.

DSP NEO Series

1. Product Overview
-Specification Comparison
-Appearance
2. Structure
-Mp Touchdown gear
-Module Layout, Pump Unit

DSP 251 DSP 501

The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.
 Osaka Vacuum, Ltd.

1. Product Overview - Specification comparison -

DSP NEO DSP NEO
Model DSP 250 DSP 500
DSP 251 Dsp 501

Cooling system Air-cooled Air-cooled

Pumping
Maximum L/min 230 500
speed
Ultimate No gas ballast Pa 0.5 0.5
pressure Gas Ballast Yes Pa 2 2
Gas inlet - NW25 NW40
Performance Connection
Gas outlet - NW25 NW25
Maximum inlet pressure Pa Atmospheric pressure Atmospheric pressure
Leak amount Pa m3/s 5.0 X10-5 5.0 X10-5
Ambient temperature °c 5-30 5-30
W mm 189 168 189 185
L mm 482 442 482 467
Size
H mm 253 253 272 285
Weight Kg 16 15 21 20
Phase Single phase Single phase
AC100-230± 10% AC100-230± 10%
Voltage V
(50/60Hz) (50/60Hz)
Power Power capacity VA 450 660
Utility
Made by Hirakawa Hutec Made by Hirakawa Hutec
Connection -
CM11 CM11
Power at ultimate pressure 240 270
W
consumption Maximum 380 600
Standard Certification CE/cNRTL CE/cNRTL
The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.
 Osaka Vacuum, Ltd.

1. Product Overview - DSP 251/DSP 501

Air inlet (NW25) Air inlet (NW40)

DSP 251 DSP 501

482mm 482mm
L
Control panel (442) (467)
189mm 189mm
W
(168) (185)
253mm 272mm
H
(253) (285)
Power
switch ( ): Current DSP Size

✓ Improved ergonomics
✓ Gas ballast as standard
Power connector
AC100-230V
DSP 251 DSP 501 Cooling Air inlet

The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.
 Osaka Vacuum, Ltd.

2. Structure
Cooling Air inlet
Fan
Control
BP
Panel
Control
electronics
MP Gear
box Connecting
MP
Plate

Exhaust
port
Pump
Gas Ballast Unit
Port

Changes
(1) MP adds touch-down gears to the rotors →Improved MP durability
(2) Improved reliability of the exhaust side bearings of MP →Directional
change of MP module prevents foreign objects from being trapped.
(3) Reliability improvement by changing to ball type check valve
The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.
 Osaka Vacuum, Ltd.

2. Structure – MP Touchdown gears

(1) Touch-down gears usually don’t contact. Touch-down gears contact

and prevent rotor lock when a small foreign object comes in.

DSP DSP NEO Series

At usual operation
(no contact on the tooth surface)
Mp Mp
Pump Assist to
Pump
Friction the slow
Room Room rotation of
increased
→ the other
Rotation rotor
30mm
slowing
down When friction increases by
MP Gear box foreign object
(Maintaining synchronization
by pressing the slowed axis)
The content of this presentation is confidential and should not be distributed to a third party without prior authorization from Osaka Vacuum. Copyright(C) Osaka Vacuum, Ltd. All rights reserved.