Scribd
Upload
515 views1 page

Macos (Up To Ver.11) Cups Driver: How To Install For Brother Dcp-T420W

1) Press the WiFi and Mono buttons on the printer simultaneously to display the node name and wireless settings on a printout. 2) Connect the Mac PC and printer to the same wireless network. Save the driver file to the Mac PC. 3) In System Preferences, add the printer using the IP tab. Enter the node name from step 1 and select the driver.

Uploaded by

Clarine Kyla Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
515 views1 page

Macos (Up To Ver.11) Cups Driver: How To Install For Brother Dcp-T420W

1) Press the WiFi and Mono buttons on the printer simultaneously to display the node name and wireless settings on a printout. 2) Connect the Mac PC and printer to the same wireless network. Save the driver file to the Mac PC. 3) In System Preferences, add the printer using the IP tab. Enter the node name from step 1 and select the driver.

Uploaded by

Clarine Kyla Bautista
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

HOW TO INSTALL

macOS (up to ver.11) CUPS driver


FOR BROTHER DCP-T420W

STEP 1 STEP 2 STEP 3

Press the WiFi & Mono buttons


on printer, simultaneously

<Interface>
WirelessLAN on
<Node name>
XXXXXXXXXXXXXX

Wi-Fi

Refer to page 2 of printout –


under Interface, ensure you see
Connect Mac PC & Printer to “Wireless LAN on” and take note Save the driver file to your
the same network of the Node name which will be Mac PC and run the installer
needed at Step 4

STEP 4

Go to System Preferences, Refer here if you get this


select Printers & Scanners and error message:
click ‘+’ to add a device

Under ‘IP’ Tab, fill in these information:


Click ‘Cancel’

Key in the Node name from


the printout in step 2

Add ‘.local’ to the


Select end of the line
HP Jetdirect – Socket

Select
HP Jetdirect – Socket

Type in your perferred


printer name

Type in your perferred


Select ‘Select Software’ from printer name
the drop down menu, select
Brother DCP-T420W CUPS
Select ‘Select Software’ from
the drop down menu, select
Click ‘Add’ when you are done Brother DCP-T420W CUPS

Click ‘Add’ when you are done

STEP 5
Open up your document
to perform a test print!

You might also like